ALWA Technische Produkte für Kunststoffverarbeitung Modell- und Formbau GmbH

Röntgenstr. 1, 48599 Gronau
Telephone +49 2562 98157
Fax +49 2562 98159


Hall map

K 2016 hall map (Hall 5): stand A14

Fairground map

K 2016 fairground map: Hall 5


Dr. Nadin Dirkmorfeld

Röntgenstr. 1
48599 gronau, Germany

+49 2562 98157

+49 2562 98159


Our range of products

Product categories

  • 01  Raw materials, auxiliaries
  • 01.03  Resins and compounds
  • 01.03.011  Casting resins

Our products

Product category: Casting resins

ALWA-MOULD D / ATLAS M 130 – Casting resin

Vacuum forming, flexible rigid urethane foam, holding fixtures, models for digitalizing and duplicating, prototype moulds for blow moulding and compression moulding, works of art, such as sculptures etc.


- After post curing can be normally demoulded within 45 minutes.
- Post cure unnecessary
- Very low linear shrinkage
- Excellent dimensional stability under heat
- Llow coefficient or thermal expansion
- True mass cast system


ALWA-MOULD D / ATLAS M 130 are a two component resin based on methyl methacrylate, with fillers for the production of moulds. After addition of the hardener, the mixture sets up quickly at room temperature. A self indicated exothermic cures the mould. Two formulations are developed to provide optimal performance for the desired application. Any thickness and volume from 1 kg – 2000 kg can be cast in one pour. Easily machine able; good heat conductivity when copper lines are cast in; void-free moulds; excellent reproduction of details and low viscosity for easy pouring.

More Less

About us

Company details

Company ALWA is a German company located in Gronau, Westphalia.

ALWA is occupied with development, production and trade of resin systems, mainly for the tooling industries since here foundation in 1986.

In combination with special filler mixtures complete application friendly systems are developed, which can be used in almost all areas of tooling for thermo- and duroplastic production.

A characteristic of all ALWA systems is the possibility, to made compact moulds of any desired volume.

These constant developments resulted to patented, award winning systems.

Since several years, we successfully distribute our products, in cooperation with our partners, worldwide. Because of the special and unique nature of our products the number of distributors in various countries around the world increases continuously.

More Less

Company data

Sales volume

2,5 - 5 Mill. US $

Export content

max. 25%

Number of employees

5 - 10



Area of business
  • Raw materials, auxiliaries
  • Semi-finished products, technical parts and reinforced plastics
Target groups

Chemical industry