Plastic Systems S.p.A.

Via G. Marconi, 6, 35010 Borgoricco (PD)
Telephone +39 049 9335-901
Fax +39 049 9335-905


Hall map

K 2016 hall map (Hall 11): stand H39

Fairground map

K 2016 fairground map: Hall 11

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Integrated automation
  • 03.07.002  Material handling
  •  Conveyors (except factory trucks and carts)
  •  Pneumatic conveyors

Our products

Product category: Pneumatic conveyors


The series of single-phase hopper loaders VLM allows conveying plastic granules to processing machines, drying hoppers and dosing units.
Single-phase hopper loaders are equipped with a built- in suction unit.
Suction capacity up to 600 Kg/h of material, at a distance of 30 m.
A microprocessor board and a keypad allow the operator to easily program and control the machine.

• 900 W double-stage blower (model VLM25 equipped with a 1800 W brushless blower).
• Automatic filter cleaning with compressed air.
• Inspection door with a stainless steel filter for venting.
• Control with a keyboard, and a digital display showing operating status and alarms.
• A built-in double cover divides the motor from the blower guaranteeing a better operation.
• Aluminium fixing ring for a 360° installation.
• Suction probe and pipe included.

• Proportional valve PVN with percentage setting.
• Acoustic alarm.
• Pyrex mini-hoppers for direct installations on machines.

More Less

Product category: Pneumatic conveyors


The powder feeders of the VLP series are suitable for the pneumatic conveyance of powder plastic materials. They can also be used for the conveyance of foods, pharmaceutical and chemical products ensuring high hygienic standards. Ideal for free flowing powders with particle sizes between 40-200 μm and bulk density from 0,35 to 1,8 kg/dm3.
They can also be used for powders with lower particle sizes by using a special sintered filters.

• High-efficiency compressed-air vacuum pump.
• Cone-shaped exhaust valve operated by a pneumatic actuator.
• ASTM304 stainless steel container.
• Self-cleaning antistatic polyester filter.
• Compact and modular construction.
• Operation control unit.
• Adjustment kit for compressed air.
• Suction pipe and probe.

• Level sensor with blade.
• Atex certification.
• Sintered filter.

More Less

Product category: Pneumatic conveyors


Compressed-air feeder for small throughputs up to 20-30 kg/h. Entirely made of anodized aluminium and Pyrex stub pipe with adjustable level sensor, the VLV feeder is equipped with a high-efficiency suction probe. It can be directly installed on a machine or a small maintenance hopper.

More Less

Product category: Pneumatic conveyors


The volumetric dosing units DM series have been designed for the automatic and precise dosing of masterbatches, additives, regrind.
The synergy between design, applied technology and material quality results in high flexibility. They can be installed on injection moulding machines, blow-moulding machines and extruders.

• Inclined-axis dosing unit.
• Brushless motor drive.
• Control console and LCD display installed directly on the dosing unit (remotable as optional).
• Self-learning calibration just by opening a slide gate.
• Lower slide gate for the unloading of material.
• Central flanged base to install up to 2 dosing units.
• Complete with static mixer.
• RS 485 Modbus interface.

• Painted steel central hopper.
• Alarm for lack of material with capacitive level sensor and buzzer.
• Kit for remoting the controller.
• Mixer body with blades.

More Less

Product category: Pneumatic conveyors


The floor-standing mixers of the “M” series have been designed to mix plastic granules such as masterbatch, additives, regrind material. These mixers have capacities ranging from 120 to 330 liters. Thanks to their small dimensions and easy handling with wheels, they can be easily placed beside machines. A hinged cover on top of the machine makes it easy to manually load material. A suction probe allows unloading the material that has been mixed.
• Loading cover with safety switch.
• Bottom discharge slide gate with safety switch.
• “Fountain-type” mixing system with a ducted mixing screw controlled by a three-phase gearmotor.
• Microprocessor-based control with programmable timer.
• Probe holder pipe for pneumatic suction of the blend.

More Less

About us

Company details

Plastic Systems S.p.A. is an Italian concern that has emerged as one of the international leading designers, manufacturers and sellers of machinery to be employed in the sector of plastics processing.

To date, the company can count on a solid, well-organised, constantly expanding structure characterised by a strong impulse for growth and an awareness of its own knowledge and experience in the sectors or dehumidification, plastic granules transportation and the mixing and processing of plastic polymers in general.

Plastic Systems’ offer includes, besides standard production, also the design of special systems tailored to the customer’s specifications.

Plastic Systems’ expansion in its twenty years of life took place in Italy, but also in Brazil and China, with its production plants and business offices, and in India with a business subsidiary whose main goal is the satisfaction of the needs of foreign markets through an on-site quick-response unit.

The strength of this company does not reside only in its entrepreneurial spirit, it is also in its highly skilled staff: engineers, graduates and young professionals. This characteristic, together with a competitive corporate philosophy, promoted the worldwide standing and success of Plastic Systems.

For years, the company has been consolidating fruitful partnerships with manufacturers operating in several areas of the plastic processing sector.

More Less