Menu

Image: Granulate of lignin-reinforced PLA, behind it an object made from the material; Copyright: KraussMaffei

Innovative bioplastic from KraussMaffei and Synergy Horizon

02.02.2024

KraussMaffei and Synergy Horizon have jointly developed a new type of bio-based reinforced thermoplastic that prioritises functionality and sustainability.
Read more
Photo: Martin Weger (center back) with his management team at the St. Valentin plant. A man in the middle holds up the prize; Copyright: ENGEL

ENGEL St. Valentin wins production contest

19.01.2024

The ENGEL large-scale machine plant in St. Valentin was named "Factory of the Year 2023" in Austria, winning both the overall award and the "Efficient Factory" category at the factory conference in Bludenz. The award is based on outstanding results in various categories, including a sustainability strategy.
Read more
Image: Interior of a red car photographed from the side; Copyright: gargantiopa

Market launch of Impranil® CQ DLU: Innovation for more sustainable textile coatings

12.01.2024

Covestro presents Impranil® CQ DLU, a new aliphatic polyester carbonate polyether polyurethane (PU) dispersion for textile coating in which around 34 percent of the carbon contained is of plant origin. This enables a sustainable textile coating as a replacement for the popular Impranil® DLU, without compromising on quality.
Read more
Photo: The founding team of Polytives GmbH (from left): Oliver Eckardt, Viktoria Rothleitner and Prof Dr Felix Schacher in a laboratory; Copyright: Susann Nürnberger

Saving energy in plastics production: Polytives wins 2nd place in the Lothar Späth Award 2023

05.01.2024

Polytives GmbH, a spin-off of the University of Jena in the field of plastics technology, was awarded second place in the Lothar Späth Award for its cooperation partnership with the university on 16.11.2023. The company, which emerged from Prof. Schacher's working group, develops innovative plastics solutions for energy optimisation in production.
Read more
Image: ZE 28 Blue laboratory extruder against a white background; PowerCopyright: KraussMaffei Group GmbH

Laboratory extruder relaunched: ZE 28 BluePower

22.12.2023

KraussMaffei Extrusion GmbH recently presented the ZE 28 BluePower high-performance laboratory extruder in a new design. Higher efficiency, shorter delivery times and greater cost-effectiveness were the focus of this development.
Read more
Photo: Detail of a person sitting in front of a laptop with the Ultrasim® simulation competence open; Copyright: BASF SE

Particle foam perfectly distributed thanks to simulation with Ultrasim®

15.12.2023

BASF SE's Ultrasim® simulation portfolio for plastics applications is now also available for manufacturing processes of components made of particle foam components. The application starts with the expanded thermoplastic polyurethane (E-TPU) Infinergy® and expands BASF's proven simulation portfolio for plastics innovations
Read more
Image: Plastic pole; Copyright: Talon Technology

From chaos to creation: How composites transform unsorted plastic waste into useful products

05.12.2023

Geoff Germon has not only recognized the problem of plastic waste in Fiji, but also wants to help the locals tackle this problem and build a sustainable business at the same time. His approach starts with a simple plastic pole.
Read more
Photo: Blue-gray water treatment plant from above; Copyright: perutskyy

LANXESS expands its range for PFAS removal from water

01.12.2023

LANXESS is presenting its new anion exchange resin Lewatit MonoPlus TP 109, which can be used for the efficient removal of contaminants such as per- and polyfluoroalkyl substances from water. In addition to Lewatit MonoPlus TP 109, the company is also presenting other selective resins that can also be used in combination for pre- and fine cleaning.
Read more
Photo: Children and adults are gathered in a circle around a table doing handicrafts; Copyright: ZOOM Kindermuseum/Natali Glisic

Borealis supports ZOOM Children's Museum in promoting playful learning in new interactive exhibition "WELCOME TO THE FUTURE!"

10.11.2023

The company Borealis is supporting the ZOOM Children's Museum in promoting learning through play in the new interactive exhibition "WELCOME TO THE FUTURE!" The new hands-on exhibition can be visited from October 4, 2023 and is designed to inspire enthusiasm for science and chemistry.
Read more
Image: Three open snack bags; Copyright: Dominik Benke

From snack bag to cooling technology: The rebirth of aluminum-plastic laminates

08.11.2023

Thanks to aluminum-plastic laminates, our favorite snacks stay as crisp as we love them. But what if the shiny insides of snack bags hold much greater potential – one that goes far beyond accompanying a movie night? Passive cooling technology could benefit from upcycling these chip bags, says a research team from the University of Bayreuth.
Read more
Image: Productivity is key: 120 x molds in 20 minutes = 10 seconds per mold; Copyright: Nexa3D

Wilson Sporting Goods using 3D printing to accelerate the injection molding process

03.11.2023

Wilson Sporting Goods uses 3D printing to accelerate the injection molding process of baseball bats. This includes bats made from aluminum, polymer composite and thermoplastics. Components such as knobs, end caps and the interface between the handle and shaft are typically injection molded from engineering resins.
Read more
Image: Train; Copyright: rawf8

Recyclable, repairable and robust: New epoxy resin for the circular economy

02.11.2023

Epoxy resins are used in combination with glass or carbon fibres to make components for aircraft, cars, trains, ships and more. Empa researchers have now developed the first fire-resistant epoxy resin-based plastic that is recyclable.
Read more
Image: Close-up of hanging gray clothes; Copyright: wirestock

Huafeng, Cyclone and Covestro collaborate to provide sports shoes and shorts with reduced carbon footprint

02.10.2023

Team Sonnenwagen from Germany plans to enter the Bridgestone World Solar Challenge in Australia with a solar-powered race car and is relying on sustainable equipment for which Huafeng, Cyclone and Covestro are cooperating. This equipment includes sports shoes and shorts that are made from recycled materials and offer improved environmental performance.
Read more
Image: 3D printer additively manufacturing a plastic structure; Copyright: leungchopan

From the 3D printer to the dishwasher: researchers develop biodegradable support material

27.09.2023

In the world of additive manufacturing, innovations are constantly revolutionising the possibilities. Despite the progress, there is one major challenge: the need for support structures. They prevent material layers from sagging – but removing them after printing can have environmentally damaging consequences. In the AquaLoes project, the IKT is tackling this challenge.
Read more
Image: completed demonstrator; Copyright: DLR

Thermoplastics in aircraft construction – less weight, more future

20.09.2023

Every gram counts: In aviation, a weight reduction of just one kilogram can save up to 25,000 litres of fuel annually. Plastics can be the key to this. The DLR uses carbon fibre-reinforced thermoplastics to make aircraft fuselages more resource-efficient. Within the framework of the Large Passenger Aircraft project, fundamentally new technologies have even been developed for this purpose.
Read more
Image: Large accumulation of PET bottles to be recycled in a warehouse; Copyright: Krones AG

Making the impossible possible: Recycling multilayer packaging

13.09.2023

Was multilayer packaging the Achilles' heel of the recycling industry? Not anymore, according to Krones and their project partners BASF, Südpack, and Tomra. Together, they're unveiling a solution that accomplishes what was once deemed impossible. At the heart of this innovation is a new adhesive that enables effective material separation during the recycling process.
Read more
Image: Black rubber granules; Copyright: alexstand

Intelligent rubber materials

12.09.2023

Materials scientists at the University of Stuttgart and pharmacists at the University of Tübingen have developed smart polymer materials that can autonomously adapt to environmental conditions, making them ideal for soft robotics and exoskeletons.
Read more
Image: Notebook, notepad with pen and laptop with soft light in background; copyright: kitzstocker

Academic training and further education in Mexico

05.09.2023

ARBURG and Instituto Tecnológico y de Estudios Superiores de Monterrey (Tec de Monterrey) have jointly launched a four-month academic training course in Mexico for the plastics industry, with the aim of producing skilled professionals. The course began with 16 participants and a commitment from ARBURG to support industry growth and development in the country.
Read more
Image: Hands holding purple biodegradable plastic polymer granules; Copyright: ArseniiPalivoda

Bayreuth researcher develops high-performance digital system for tailoring polymers

01.09.2023

Prof. Dr. Christopher Kuenneth at the University of Bayreuth, Germany, together with research partners in Atlanta, has developed a digital system that filters out those materials best suited for targeted applications from among some 100 million theoretically possible polymers. The system, called polyBERT, treats the chemical structure of polymers like a chemical language.
Read more
Image: A stool is printed at K 2022 with the help of ADAM software; Copyright: IKV/Fröls

Digital meets material: a software transforms additive manufacturing

17.08.2023

ADAM could redefine plastics manufacturing. A big claim, but not without reason: Behind the acronym ADAM is a software called "Advanced Dimension Additive Manufacturing" that caused a real stir at K 2022. The impressive result of this software in action? A high-performance screw extruder controlled by an agile jointed-arm robot.
Read more
Image: PhD student Svenja Pohl with a coloured solar concentrator; Copyright: Oliver Dietze

Luminescent solar collectors: Silicone makes power generation more flexible and colourful

22.05.2023

Plastics contribute to climate protection. As fibre-reinforced plastics for wind turbines or films for solar cells, they already play an important role in power generation from renewable energies. But the conventional solutions are not equally suitable for every area of application. This is where a new type of material comes into play that was developed at Saarland University.
Read more