04.12.2024
Rising raw material prices, sustainability pressure and the development of a circular economy are presenting the injection molding industry with new challenges. With in-house recycling, which integrates waste directly back into production, WITTMANN offers a solution that not only reduces costs but also protects the environment.08.10.2024
In a year's time, it will be that time again: K 2025 will open its doors and bring the global plastics and rubber industry together in Düsseldorf. From October 8 to 15, 2025, K will once again be the place where innovations are presented, new trends are discussed, and contacts are forged. The industry is already looking ahead to what will be on the agenda in October 2025.25.09.2024
Plastics industry strives to recycle plastics as comprehensively as possible. However, this is not always so easy – especially when different types of plastic are difficult to distinguish visually. This is when near-infrared spectrometers (NIR) come to the rescue, identifying the types of plastic and thus facilitating further processing.14.08.2024
The circular economy presents an increasingly complex challenge for companies. Sustainability is no longer just a compliance issue but a crucial success factor. In this context, Interzero offers a solution: the Materialkonto (‘material account’). This provides companies with a digital twin of their resource and circular management.02.08.2024
Driven by increasing consumer expectations and regulatory requirements, the need to measure the use of sustainable materials and their associated carbon footprints has become essential. Covestro and Alibaba Cloud have teamed up to develop solutions that enhance supply chain transparency, focusing on sustainable plastics and carbon accounting through advanced digital technologies.03.07.2024
An innovative tool called CYCLOPS – Circularity Optimisation for Plastics has set itself the task of closing the gap between the need for information and the supply of recycled materials. By providing comprehensive data and assessments, it helps companies to make more sustainable decisions and organise their production processes in a more environmentally friendly way.26.06.2024
How does the circular economy work? Focus on sustainable practices and environmental benefits.19.06.2024
Vytal and PepsiCo are taking reusable tableware to a new level in their cooperation. With individual IDs for each cup, which can be read using a QR code or RFID tag, efficiency at large events is increased enormously. The technology not only optimises the return of the cups, but also the entire recycling process, thus making an important contribution to the Circular Economy.22.05.2024
The Foxbase platform makes B2B sales processes more efficient. CTO Carsten Dolch and CEO Benjamin Dammertz explain how setting up the software and integrating AI helps improve customer interactions. Various industries, including the plastics industry, benefit from the flexibility and efficiency of this solution. Find out more in the video.20.05.2024
Industry interview on OPC UA with Dana Ford, Auxiliary Controls Engineer for Material Handling/Auxiliary at Wittmann Inc.06.05.2024
SABIC, a leader in the plastics and rubber industry, is set to launch its latest innovation, EXTEM™ RH resins. These high-performance resins are designed for use in the production and assembly of micro-lens arrays (MLAs), offering advanced scalability and manufacturability in commercial onboard and co-packaged optics.30.04.2024
Industry interview with Georg Kiesl, General Manager at Billion SAS on the spread of the OPC UA standard in the USA.11.04.2024
AI is revolutionising modern industry. Thanks to it, complex processes can be automated or efficiency increased. In the plastics industry, AI not only plays a decisive role in the optimisation of production processes and the development of new materials. It also enables more precise waste sorting and therefore better recycling – a benefit for the environment!03.04.2024
Waste management is undergoing a transformation like never before, thanks to cutting-edge technologies such as artificial intelligence (AI) and machine learning. Companies like PolyPerception are at the forefront of this revolution, redefining how waste is sorted and managed to meet the growing challenges of the industry.22.03.2024
Industry interview on OPC UA with Glenn Anderson, Chief Operating Officer at the Plastics Industry Association (PLASTICS) and Thorsten Kühmann, Managing Director of the VDMA Plastics and Rubber Machinery Association10.01.2024
The forthcoming EU packaging regulation is casting its shadow: minimum quotas for recyclates are putting the plastics industry under pressure. Cirplus presents a digital platform that not only makes the recyclate market transparent, but also enables real-time coordination between the players.15.12.2023
BASF SE's Ultrasim® simulation portfolio for plastics applications is now also available for manufacturing processes of components made of particle foam components. The application starts with the expanded thermoplastic polyurethane (E-TPU) Infinergy® and expands BASF's proven simulation portfolio for plastics innovations11.12.2023
Profitability and sustainability are not opposites – on the contrary! KraussMaffei's lifecycleValueCalculator proves it: the digital tool calculates the current status of plastics processors' products and shows them their individual potential for improvement. This enables them to increase their production efficiency and achieve their ecological goals at the same time.08.12.2023
The two companies Covestro and HiPhi are launching a laboratory to solve the key challenges of future mobility. The focus will be on promoting the use of low-carbon solutions, drawing up relevant standards and developing intelligent surface technologies and battery solutions.22.11.2023
Artificial intelligence and plastics recycling – two concepts that have little in common at first glance, but which form an impressive symbiosis in practice. STEINERT and RE Plano are impressive proof of this. Thanks to AI, they have succeeded in overcoming the challenges of sorting polyethylene and polypropylene, paving the way for innovative recycling solutions.20.11.2023
ENGEL is gradually expanding its customer portal e-connect into a production portal. In addition, a solution from the inject 4.0 family for bidirectional data exchange between simulation and injection molding machine has been expanded and now also works with MOLDEX3D.06.11.2023
The Reifenhäuser Group uses R-Cycle, a digital product passport for plastics based on GS1 standards, to enable its customers to trace products. This facilitates data management in the manufacturing process and promotes the recycling of plastic packaging.22.09.2023
Wherever there is movement in manufacturing, the plastic plain bearings and energy guiding chains from igus can be used. Even in packaging machines, e-chains and plain bearings made of high-performance polymers ensure movement. The products are durable but at some point they also have to be disposed of. igus has set up its own recycling programme for this purpose.01.09.2023
Prof. Dr. Christopher Kuenneth at the University of Bayreuth, Germany, together with research partners in Atlanta, has developed a digital system that filters out those materials best suited for targeted applications from among some 100 million theoretically possible polymers. The system, called polyBERT, treats the chemical structure of polymers like a chemical language.23.08.2023
Nine percent – that is the proportion of all plastic waste that was recycled from 1950 to 2015. This must change urgently. Artificial intelligence can help. EREMA and the Software Competence Center Hagenberg (SCCH) are researching exactly how in a joint project.17.08.2023
ADAM could redefine plastics manufacturing. A big claim, but not without reason: Behind the acronym ADAM is a software called "Advanced Dimension Additive Manufacturing" that caused a real stir at K 2022. The impressive result of this software in action? A high-performance screw extruder controlled by an agile jointed-arm robot.13.07.2023
The Cologne-based plastics specialist igus invests in the Hamburg-based start-up cirplus to close the plastics cycle and revolutionize the recycling trade of technical and standard thermoplastics. With their recycling platforms, igus and cirplus want to jointly drive the regenerative plastics industry in the future.13.07.2023
German plastics and rubber machinery manufacturers recorded sales growth of 10 percent in 2022. Expectations for 2024 are subdued, as new orders are declining. The industry faces the challenge of decarbonization and defossilization, which requires investment and restructuring.22.06.2023
Researchers at the Fraunhofer Institute for Structural Durability and System Reliability LBF see online rheological investigations as a promising method to accelerate the development process by determining the optimal amount of antioxidants more efficiently.21.06.2023
Efficient work only works when everything runs smoothly – also on the shop floor. But how do I know how busy and productive my machines are at the moment? This requires data that reflect reality, but which is often still lacking today. ENLYZE has developed an analysis platform that can close this gap and make production more efficient.10.05.2023
Robots already take over a large number of monotonous, repetitive tasks today – freeing up time and resources for creative and more exciting tasks. Henkel is also automating work steps in its new Inspiration Center Düsseldorf (ICD). In a data-driven laboratory, new adhesive formulations are automatically prepared and tested around the clock.27.04.2023
The lack of standardized analytical procedures for microplastic data has led to significant deviations, especially for small particles with high hazard potential. Researchers from the University of Bayreuth and the Alfred Wegener Institute have compared two automated analysis procedures and called for standardization to improve the comparability of data.21.04.2023
The share of recycled material in plastic products is growing. The exception: food packaging. The requirements for the quality of the material for food contact are high, but in the case of recyclates there is still often a lack of corresponding information today. The project COPPA wants to create transparency in this area – with an open digital platform.05.04.2023
With the "Product Carbon Footprint Engine" developed by LANXESS, the CO2 footprint can be calculated automatically for the Group's products. With this innovation, the speciality chemicals company aims to help its customers achieve their sustainability goals.30.03.2023
The first edition of the K China Symposium was successfully held at the Shanghai International Convention Centre on 23 March 2023. Participants praised the opportunity for professional exchange, business expansion and inspiration offered by this new, international platform.29.03.2023
Cardboard dominates parcel logistics. Shrinkage and return transport costs have so far been too big hurdles for reusable containers made of plastic, even though there is a lot to be said for them in terms of sustainability. BOOXit overcomes these hurdles – and adds one on top: the reusable system is not only sustainable, but also robot-compatible.15.03.2023
Plastic packaging made from recycled material? Yes, but please as high quality as possible – and recyclable! This poses great challenges for manufacturers, because the use of recycled materials still often leads to downcycling. One key to more sustainable plastic packaging lies in digitalisation. This is also where the KIOptiPack project comes in.01.03.2023
Plastics must be newly thought and designed - that is the credo at the Johannes Kepler University in Linz. From autumn 2023, courses on plastics technology will be offered here. Plastics don't just play a supporting role there, they are the star of the show. Because they are a key factor for both the present and the future.01.02.2023
Engineered specifically for high volume packaging, medical and automotive applications requiring the highest processing precision in the fastest cycle time, Sumitomo (SHI) Demag is accelerating its global expansion of the IntElect platform.31.01.2023
Studies show that we are up to nine times more likely to remember something we have experienced in virtual reality. This knowledge can also be interesting for the plastics industry. With the iguversum, igus has created a digital space in which the manufacturer's products can be discovered. In the future, engineering projects will also be carried out there.16.01.2023
With 80.000 all-electric machines in operation around the globe, Sumitomo (SHI) Demag’s strong focus is on the sustainable and resource saving operation of injection molding machines in the plastic processing industry.09.01.2023
ENGEL breaks new ground in injection moulding machine distribution. Blazing a trail for its industry, the machine manufacturer now offers its customers a pay-per-use model on top of classical machine purchases. This helps processors to reduce their investment risk while at the same time boosting flexibility in production.09.01.2023
Producing infection control clothing requires a lot of energy and uses lots of material resources. Fraunhofer researchers have now developed a technology which helps to save materials and energy when producing nonwovens. A digital twin controls key manufacturing process parameters on the basis of mathematical modeling.04.01.2023
Niaga®, an innovation venture of Covestro, is the winner of the 2022 European Institute of Innovation and Technology (EIT) Community Circular Economy Prize in the Digital Products Passports (DPP) category. The EIT Circular Economy Community awards relevant start-ups and SMEs (small and medium sized enterprises) with significant new solutions accelerating the circular economy.04.11.2022
Real-time visualisation of process and machine data holds great potential for the circular economy as a whole and for recycling processes in particular. At K 2022 EREMA launched "PredictOn:Drive", a predictive maintenance application for its recycling machines.26.10.2022
Steinert.view® is a flexible and reliable monitoring solution for STEINERT sensor-based sorting machines. Performance data collected is visualized in a web app so that operators can see at a glance whether machines are currently producing, whether there are changes in production, or whether there is potential for optimization.21.10.2022
27.09.2022
Oliver Fuss has completed not one, but two apprenticeships at Arburg: first an apprenticeship as a mechatronics technician and then as a process mechanic for plastics and rubber technology. Now he works in the turnkey division, where fully automated manufacturing cells are designed and built.13.09.2022
What's old is far from bad. This also applies to machines - however, they are often not capable of communicating. Yet it is precisely this ability that is of interest when it comes to evaluating data or correcting errors. Injection molding machine manufacturer Steinl has found a way to connect even older machines to a communication network.12.09.2022
Researchers at the Manchester Institute of Biotechnology (MIB) have developed a new enzyme engineering platform. The focus is on plastic-degrading enzymes that can be improved through directed evolution. To test their platform, they engineered a new enzyme, HotPETase, through the directed evolution of IsPETase.08.09.2022
Researchers at the University of Washington have developed the first flexible, wearable thermoelectric device capable of converting body heat into electricity. The researchers demonstrated that they can print these devices on stretchable textiles and curved surfaces. This will allow the devices to be applied to clothing and other objects in the future.25.08.2022
Individualization is the trend. In the plastics industry, too, more and more individualized machines are coming onto the market. Of course, these machines also require individualized manuals with instructions tailored specifically to them. However, this is not yet a reality today. The AdaptAR project wants to change that – with the help of Augmented Reality and an app.22.08.2022
Researchers from the Massachusetts Institute of Technology develop a comfortable, form-fitting fabric that recognizes its wearer's activities, like walking, running, and jumping. Through the process of thermoforming, the researchers were able to significantly improve the precision of pressure sensors woven into multilayer knitted textiles, which they call 3DKnITS.16.08.2022
With the Packaging Act, Germany is taking a further step towards an all-encompassing raw material cycle for packaging. One of the requirements aims to significantly increase the amount of recyclable packaging. Packaging used in mail order or "dispensed" for to-go products has recently been required to be registered in the LUCID Packaging Register.09.08.2022
Twenty-year-old Yannick Herzog trained as an electronics technician for automation technology at Arburg and now works in the company's printed circuit board production. Since August 2021, he has been responsible for SPI and AOI for quality control of printed and assembled PCBs, respectively, in a production line. These are used in the control systems of the Arburg machines.08.08.2022
Materials scientists at UCLA and colleagues at the nonprofit research institute SRI International have developed an artificial muscle. These are equipped with PHDE actuators. UCLA research uses a "dry" process in which the films are layered with a blade and then cured with UV light so that the layers become uniform.02.08.2022
Those who work meticulously to design a product can hardly await the day they can hold the finished item in their hands. Alpla is a company headquartered in Hard, Austria, that speeds up this process. Customers can convert their ideas into reality and ideally leave Alpla's STUDIOa with a prototype in hand.11.07.2022
Covestro is researching material solutions for sustainable energy generation at its new Wind Technology Center. They are focusing on the optimization and new development of PUR resins in collaboration with customers.01.07.2022
In the "OSFIT" (One Shot Fully Integrated Thermoplastic Frame) project, automated processes were developed to reduce both the time required and the complexity of the assembly and joining steps in aircraft production.21.06.2022
Solvay launched the Kalix® 10000 series, a partially bio-based material made with renewable feedstock from non-food competing sources, is produced with 100% renewable electricity.21.06.2022
The EU's Circular Economy Action Plan stipulates that by 2050 all plastic packaging must be completely recyclable and consist of at least 70 percent recycled material. The majority of plastic waste still ends up in landfills or incinerators – in the worst case, in the environment.07.06.2022
Plastics are versatile and come in every conceivable shape, size, color, and function. Yet before plastic products can fulfill their desired function, they are subject to testing to confirm they comply with various standards. It takes testing labs hours, if not days, to create a quote for materials testing.06.06.2022
Researchers at the Technical University of Kaiserslautern have developed intelligent software that can adjust parameters such as temperature and printing speed during printing.25.04.2022
Zhenan Bao, a chemical engineer at Stanford University, and her research team have provided proof of principle for a stretchable, potentially reshapeable display using a method to fabricate an elastic light-emitting polymer with high luminosity.08.03.2022
Technological advances and evolving user preferences are redefining the look (and feel) of future electronic devices. Some examples were on display at the big CES 2022 consumer technology show in Las Vegas during the first week of January.04.03.2022
Knowledge is power – this also applies to the plastics industry. But training courses cost time and tie up participants, although they are actually needed elsewhere. So that companies do not have to do without employees for entire days during such training courses, the SKZ has developed the eCampus together with Hanser Verlag.28.02.2022
We live in a world in which processes are becoming increasingly complex. This also applies to the plastics industry. One way to support people in production with their demanding tasks is through digital tools – and not only on site at the plant, but also remotely. The increasing amount of data also contributes to predictive maintenance of machines.16.02.2022
How can plastic packaging become intelligent? By providing them with digital watermarks that can be read by sorting systems and thus simplify the sorting process. The fact that this technology works was proven in the pioneering HolyGrail 1.0 project with a proof of concept.07.02.2022
New AI-based process optimisation tools have been developed specifically targeting injection moulding machines. Plus10 and the SKZ performed a series of thorough AI pilot tests on Sumitomo (SHI) Demag machines.31.01.2022
Shopping can be exhausting, for example when you first have to find the price label of a product or rush through the aisles looking for alternative products. All of this could be done at a glance while shopping – if InfraredTags were integrated into a product's packaging.18.01.2022
Outlook, orientation, hot topics +++ exciting live discussion rounds with industry experts, users, and representatives from the media and politics +++ K-Talk enables global dialog even before the Leading Trade Fair in the fall +++ on-demand service08.12.2021
Renewable energies, resource-saving processes, climate neutrality – rising to major challenges is key. These global tasks require creative minds, innovative technologies and high-performance materials.25.11.2021
Sometimes you have to see a problem with your own eyes – or feel it with your own feet – to want to do something about it. At least that's how it was for Christian Schiller, who launched cirplus, a digital marketplace for recyclates.08.11.2021
A new University of Rhode Island web platform, "Plastics: Land to Sea," has been launched to provide the science community with a burgeoning array of data resources and tools designed to inform and support dialogue concerning research focused efforts to start addressing plastics pollution. The platform can be found at: plastics.uri.edu.22.09.2021
The British Plastics Federation (BPF), in conjunction with PlasticsEurope and RECOUP, has launched a new online recycling resource kit aimed at educating students about recycling plastics and the science of polymers.24.08.2021
General conditions for chemical and materials companies are changing rapidly. But the thorough research, development and commercialization of new materials can be lengthy. AI can accelerate this process.23.08.2021
There are many aspects and forms of digitalization in manufacturing, ranging from Industry 4.0, the Internet of Things (IoT), artificial intelligence and additive manufacturing, to augmented and virtual reality, 5G connectivity, mobile apps, blockchain technology, and more.03.08.2021
Only a small percentage of materials currently used in plastic processing are recyclates. Yet these secondary plastics are in no way of inferior quality to virgin material. The culprit is often a lack of data and poor communication between recyclers and plastic manufacturers. Digital solutions can help close material cycles in the plastics industry.19.07.2021
Imagine flexible surgical instruments that can twist and turn in all directions like miniature octopus arms, or how about large and powerful robot tentacles that can work closely and safely with human workers on production lines.12.07.2021
The environment around us is exposed to many different synthetic microparticles, potentially harmful for plants and animals. Some of these particles come from car tires and road surfaces and are generated when we drive.01.07.2021
In the scope of a future-oriented collaboration in the field of industrial production, the Fraunhofer-Gesellschaft is cooperating with the VSB – Technical University of Ostrava (VSB-TUO). The partners research and develop the potential offered by energy management technologies, artificial intelligence (AI) and intelligent production in industry.27.05.2021
Today, the kitchen stays cold: if you don't feel like cooking, you simply have something delivered. However, the meals often come in disposable packaging that only has a short lifespan. This bothered the founders of VYTAL, who developed a deposit-free reusable system. They prove that plastic and sustainability are not necessarily mutually exclusive.