Menu

Image: View of the Earth from space - symbolic image for future applications of 3D printing in space travel; Copyright: Oulailux - stock.adobe.com

3D Printing Redefined: Manufacturing Plastic Components Faster and More Precisely

06.11.2024

Just a few years ago, 3D printing was still a niche product. Today, it has long been relevant to the market. The market volume for 2024 is estimated at 27.52 billion US dollars. However, despite the rapid increase, there are limits, for example in terms of production speed or printing accuracy. The electrophotographic 3D printing process at TH Köln could overcome these limitations.
Read more
Image: Hand reaching into apple waste and lifting it up; Copyright: Covestro

New Leather Alternative Made From Apple Waste: Sustainability in the Fashion and Automotive Industry

25.10.2024

The leather alternative LEAP® uses waste from apple processing and the sustainable INSQIN® technology to create durable and flexible products for a wide range of industries.
Read more
Image: a person holding a sign that says 'recycled material' in front of some pullovers; Copyright: Pressmaster

Closed loop recycling for more sustainability in the textile industry

23.10.2024

Everyone is talking about recycling, and yet there are sectors where it is only used to a very limited extent - for example in the textile and clothing industry. Fristdas has managed to create a closed loop recycling system for its clothing. In this interview, Lena Bay Højland explains how this affects the product range and what Fristads' vision is for further development.
Read more
Photo: A rubik's cube on a desk; Copyright: Lemnaouer

Rubik's Cube turns 50: A plastic cube that keeps the world spinning

11.09.2024

Rubik's Cube is celebrating its 50th anniversary. Today it is made of plastic (some of it even recycled) and is as popular as it was on the first day.
Read more
Image: young asian woman in a laboratory; photo: Luke Hayes for Virginia Tech.

Virginia Tech develops biodegradable bioplastics from food waste

06.09.2024

This innovative approach not only offers a sustainable solution to plastic pollution but also provides a new life for materials that would otherwise be discarded.
Read more
Photo: Children and adults with a banner at the Wongpanit Suvarnabhumi Recycle Station; Copyright: Indorama Ventures

PET Youth Camp for Sustainable Plastic Management

12.08.2024

Indorama Ventures, a global leader in sustainable chemical production, has partnered with the Bangkok Metropolitan Administration (BMA) and its Department of Education to host the "PET Youth Camp for Sustainable Plastic Management." This initiative aims to educate and empower young leaders from BMA schools in effective plastic waste management, with a focus on PET recycling.
Read more
Image: a black racing car on a race track; Copyright: Formula Student Germany / andrae

Formula Student puts plastics in the fast lane

07.08.2024

Once a year, students from all over the world meet at Germany’s world-famous Hockenheim Ring (Germany) to compete against each other in single-seater race cars made of plastic. In addition to the performance of the cars in various disciplines such as cornering, acceleration and energy consumption, the jury also evaluates the design of the cars, the teams' cost planning and sales presentation.
Read more
Photo: A runner's hands tie a bow on a running shoe; Copyright: envato

Jogging shoes and co.: plastics in sportswear

31.07.2024

The right outfit for every sport. Even for a short jog after work, sports enthusiasts can access sophisticated equipment. From breathable sports shirts and cooling running tights to running shoes. The choice is diverse. However, there is one unifying factor that most models have in common - plastics are used in their manufacture.
Read more
Photo: Building blocks with the individual words: We, need, people, like, you. They are stacked on a table, with a red wall and a palm leaf visible in the back; Copyright: Uuganbayar – stock.adobe.com

Skills shortage in the plastics industry

24.07.2024

The shortage of skilled labour poses considerable challenges for the plastics industry. In an interview with K-Mag, Sven Weihe from the German Plastics Processing Industry Association (in German: Gesamtverband Kunststoffverarbeitende Industrie e.V. - GKV) explains the main causes of the shortage of qualified specialists and what measures the association is taking to counteract this.
Read more
Image: Three men in suits smiling at the camera and holding a transparent car part; Copyright: Covestro

Closing the loop: turning old tires into new car parts

15.07.2024

In an ambitious move towards sustainability, Covestro, Neste, and Borealis have joined forces to revolutionize the recycling of discarded tires into high-quality automotive parts. This collaboration marks a significant step in driving circularity within the plastics and automotive industries.
Read more
Image: a hand with a small plastic spatula placed under the artificial eye of a patient; Copyright: Max Tactic - stock.adobe.com

3D printing: manufacturing eye prostheses from plastic

12.06.2024

Plastic eye prostheses: Lightweight, robust and natural in appearance - and now available via 3D printing. Find out more here!
Read more
Image: Interior of a possible Hyperloop pod; Copyright: THL

High-performance adhesive for the transportation systems of the future

08.05.2024

When you sit on a train, you probably rarely realize how much technology and expertise from a wide range of industries has gone into its creation. The materials used are diverse. The various elements are joined together into a whole by welding, screwing, riveting, bolting and now, increasingly, gluing. New adhesives are opening up many possibilities in design and performance improvements.
Read more
Image: Coating a cotton yarn with PHA using a coating nozzle; Copyright: DITF

Biopolymer coating for textiles – protective bacteria

03.05.2024

It defies wind and weather and protects us from a wide range of environmental influences: Functional clothing. Special coatings are responsible for this. Polyacrylates or polyurethanes, which are based on crude oil and therefore a finite resource, are often used for this purpose. The DITF are therefore researching alternatives from renewable sources – including polymers from bacteria.
Read more
Image: a boat on the open sea; Copyright:  AKVA group™

Renewable plastic for workboat hulls

15.04.2024

Aquaculture takes a sustainable leap forward with the unveiling of a groundbreaking workboat hull constructed from renewable plastic. Borealis and AKVA group will introduce this innovation in Mo i Rana, Norway, in Spring 2024, marking a significant milestone for circularity in marine technology.
Read more
Image: All-electric EcoPower Xpress; Copyright: WITTMANN

All-Electric Injection Molding for Thin-Wall Packaging

08.04.2024

Heinrich Axmann GmbH & Co. KG in Cologne, Germany, has made a significant shift towards sustainability by adopting an all-electric injection molding machine, the EcoPower Xpress, provided by WITTMANN. This move has led to a reduction in energy consumption by over 30% for producing thin-walled packaging, marking a significant step towards eco-friendly production methods.
Read more
Image: Breathing mask made of Apec® 2045 high-temperature copolycarbonate; Copyright: Covestro

Heat resistant medical polycarbonate from Covestro

22.02.2024

Covestro, a leading developer of polymers and high-performance plastics, presents Apec® 2045, an advanced copolycarbonate. This material combines outstanding features such as biocompatibility, heat resistance, transparency and durability, making it the ideal solution for the manufacture of medical devices.
Read more
Image: Granulate of lignin-reinforced PLA, behind it an object made from the material; Copyright: KraussMaffei

Innovative bioplastic from KraussMaffei and Synergy Horizon

02.02.2024

KraussMaffei and Synergy Horizon have jointly developed a new type of bio-based reinforced thermoplastic that prioritises functionality and sustainability.
Read more
Photo: Martin Weger (center back) with his management team at the St. Valentin plant. A man in the middle holds up the prize; Copyright: ENGEL

ENGEL St. Valentin wins production contest

19.01.2024

The ENGEL large-scale machine plant in St. Valentin was named "Factory of the Year 2023" in Austria, winning both the overall award and the "Efficient Factory" category at the factory conference in Bludenz. The award is based on outstanding results in various categories, including a sustainability strategy.
Read more
Image: Interior of a red car photographed from the side; Copyright: gargantiopa

Market launch of Impranil® CQ DLU: Innovation for more sustainable textile coatings

12.01.2024

Covestro presents Impranil® CQ DLU, a new aliphatic polyester carbonate polyether polyurethane (PU) dispersion for textile coating in which around 34 percent of the carbon contained is of plant origin. This enables a sustainable textile coating as a replacement for the popular Impranil® DLU, without compromising on quality.
Read more
Photo: The founding team of Polytives GmbH (from left): Oliver Eckardt, Viktoria Rothleitner and Prof Dr Felix Schacher in a laboratory; Copyright: Susann Nürnberger

Saving energy in plastics production: Polytives wins 2nd place in the Lothar Späth Award 2023

05.01.2024

Polytives GmbH, a spin-off of the University of Jena in the field of plastics technology, was awarded second place in the Lothar Späth Award for its cooperation partnership with the university on 16.11.2023. The company, which emerged from Prof. Schacher's working group, develops innovative plastics solutions for energy optimisation in production.
Read more
Image: ZE 28 Blue laboratory extruder against a white background; PowerCopyright: KraussMaffei Group GmbH

Laboratory extruder relaunched: ZE 28 BluePower

22.12.2023

KraussMaffei Extrusion GmbH recently presented the ZE 28 BluePower high-performance laboratory extruder in a new design. Higher efficiency, shorter delivery times and greater cost-effectiveness were the focus of this development.
Read more
Photo: Detail of a person sitting in front of a laptop with the Ultrasim® simulation competence open; Copyright: BASF SE

Particle foam perfectly distributed thanks to simulation with Ultrasim®

15.12.2023

BASF SE's Ultrasim® simulation portfolio for plastics applications is now also available for manufacturing processes of components made of particle foam components. The application starts with the expanded thermoplastic polyurethane (E-TPU) Infinergy® and expands BASF's proven simulation portfolio for plastics innovations
Read more
Image: Plastic pole; Copyright: Talon Technology

From chaos to creation: How composites transform unsorted plastic waste into useful products

05.12.2023

Geoff Germon has not only recognized the problem of plastic waste in Fiji, but also wants to help the locals tackle this problem and build a sustainable business at the same time. His approach starts with a simple plastic pole.
Read more
Photo: Blue-gray water treatment plant from above; Copyright: perutskyy

LANXESS expands its range for PFAS removal from water

01.12.2023

LANXESS is presenting its new anion exchange resin Lewatit MonoPlus TP 109, which can be used for the efficient removal of contaminants such as per- and polyfluoroalkyl substances from water. In addition to Lewatit MonoPlus TP 109, the company is also presenting other selective resins that can also be used in combination for pre- and fine cleaning.
Read more
Photo: Children and adults are gathered in a circle around a table doing handicrafts; Copyright: ZOOM Kindermuseum/Natali Glisic

Borealis supports ZOOM Children's Museum in promoting playful learning in new interactive exhibition "WELCOME TO THE FUTURE!"

10.11.2023

The company Borealis is supporting the ZOOM Children's Museum in promoting learning through play in the new interactive exhibition "WELCOME TO THE FUTURE!" The new hands-on exhibition can be visited from October 4, 2023 and is designed to inspire enthusiasm for science and chemistry.
Read more
Image: Three open snack bags; Copyright: Dominik Benke

From snack bag to cooling technology: The rebirth of aluminum-plastic laminates

08.11.2023

Thanks to aluminum-plastic laminates, our favorite snacks stay as crisp as we love them. But what if the shiny insides of snack bags hold much greater potential – one that goes far beyond accompanying a movie night? Passive cooling technology could benefit from upcycling these chip bags, says a research team from the University of Bayreuth.
Read more
Image: Productivity is key: 120 x molds in 20 minutes = 10 seconds per mold; Copyright: Nexa3D

Wilson Sporting Goods using 3D printing to accelerate the injection molding process

03.11.2023

Wilson Sporting Goods uses 3D printing to accelerate the injection molding process of baseball bats. This includes bats made from aluminum, polymer composite and thermoplastics. Components such as knobs, end caps and the interface between the handle and shaft are typically injection molded from engineering resins.
Read more
Image: Train; Copyright: rawf8

Recyclable, repairable and robust: New epoxy resin for the circular economy

02.11.2023

Epoxy resins are used in combination with glass or carbon fibres to make components for aircraft, cars, trains, ships and more. Empa researchers have now developed the first fire-resistant epoxy resin-based plastic that is recyclable.
Read more
Image: Close-up of hanging gray clothes; Copyright: wirestock

Huafeng, Cyclone and Covestro collaborate to provide sports shoes and shorts with reduced carbon footprint

02.10.2023

Team Sonnenwagen from Germany plans to enter the Bridgestone World Solar Challenge in Australia with a solar-powered race car and is relying on sustainable equipment for which Huafeng, Cyclone and Covestro are cooperating. This equipment includes sports shoes and shorts that are made from recycled materials and offer improved environmental performance.
Read more
Image: 3D printer additively manufacturing a plastic structure; Copyright: leungchopan

From the 3D printer to the dishwasher: researchers develop biodegradable support material

27.09.2023

In the world of additive manufacturing, innovations are constantly revolutionising the possibilities. Despite the progress, there is one major challenge: the need for support structures. They prevent material layers from sagging – but removing them after printing can have environmentally damaging consequences. In the AquaLoes project, the IKT is tackling this challenge.
Read more
Image: completed demonstrator; Copyright: DLR

Thermoplastics in aircraft construction – less weight, more future

20.09.2023

Every gram counts: In aviation, a weight reduction of just one kilogram can save up to 25,000 litres of fuel annually. Plastics can be the key to this. The DLR uses carbon fibre-reinforced thermoplastics to make aircraft fuselages more resource-efficient. Within the framework of the Large Passenger Aircraft project, fundamentally new technologies have even been developed for this purpose.
Read more
Image: Large accumulation of PET bottles to be recycled in a warehouse; Copyright: Krones AG

Making the impossible possible: Recycling multilayer packaging

13.09.2023

Was multilayer packaging the Achilles' heel of the recycling industry? Not anymore, according to Krones and their project partners BASF, Südpack, and Tomra. Together, they're unveiling a solution that accomplishes what was once deemed impossible. At the heart of this innovation is a new adhesive that enables effective material separation during the recycling process.
Read more
Image: Black rubber granules; Copyright: alexstand

Intelligent rubber materials

12.09.2023

Materials scientists at the University of Stuttgart and pharmacists at the University of Tübingen have developed smart polymer materials that can autonomously adapt to environmental conditions, making them ideal for soft robotics and exoskeletons.
Read more
Image: Notebook, notepad with pen and laptop with soft light in background; copyright: kitzstocker

Academic training and further education in Mexico

05.09.2023

ARBURG and Instituto Tecnológico y de Estudios Superiores de Monterrey (Tec de Monterrey) have jointly launched a four-month academic training course in Mexico for the plastics industry, with the aim of producing skilled professionals. The course began with 16 participants and a commitment from ARBURG to support industry growth and development in the country.
Read more
Image: Hands holding purple biodegradable plastic polymer granules; Copyright: ArseniiPalivoda

Bayreuth researcher develops high-performance digital system for tailoring polymers

01.09.2023

Prof. Dr. Christopher Kuenneth at the University of Bayreuth, Germany, together with research partners in Atlanta, has developed a digital system that filters out those materials best suited for targeted applications from among some 100 million theoretically possible polymers. The system, called polyBERT, treats the chemical structure of polymers like a chemical language.
Read more
Image: A stool is printed at K 2022 with the help of ADAM software; Copyright: IKV/Fröls

Digital meets material: a software transforms additive manufacturing

17.08.2023

ADAM could redefine plastics manufacturing. A big claim, but not without reason: Behind the acronym ADAM is a software called "Advanced Dimension Additive Manufacturing" that caused a real stir at K 2022. The impressive result of this software in action? A high-performance screw extruder controlled by an agile jointed-arm robot.
Read more
Image: PhD student Svenja Pohl with a coloured solar concentrator; Copyright: Oliver Dietze

Luminescent solar collectors: Silicone makes power generation more flexible and colourful

22.05.2023

Plastics contribute to climate protection. As fibre-reinforced plastics for wind turbines or films for solar cells, they already play an important role in power generation from renewable energies. But the conventional solutions are not equally suitable for every area of application. This is where a new type of material comes into play that was developed at Saarland University.
Read more