K 2025 from 8 to 15 October in Düsseldorf has set itself the goal of addressing the central issues of our times. One of its three Hot Topics reads “Shaping the Circular Economy”. Reason enough to shed some light on the current state of affairs in terms of circularity six months ahead of the world-leading trade fair of the plastics and rubber industry.
The world is experiencing a raw material crisis: more than 100 billion tons of raw materials are consumed annually but over 90% of the raw materials used are not recycled. An alarming ratio flagged up by the European Investment Bank (EIB). Rising CO₂ costs, volatile raw material prices and geopolitical insecurities put additional pressure on companies to manage resources more carefully.
Circularity is considered the decisive lever for achieving a sustainable future. An analysis by management consultancy Material Economics shows that Europe could save 450 million tons of CO₂ equivalents through closed material cycles by 2030 – this corresponds to 8% of the current emissions. In the long term, the Ellen MacArthur Foundation forecasts that up to 45% of emissions could be avoided by a closed-loop circular economy.
This transformation also holds enormous economic potential: according to estimates by consulting group EY, the use of secondary raw materials reduces energy consumption by 20% to 90%, saves large amounts of water and could save European firms up to EUR 465 billion in material costs per year. The International Labour Organisation (ILO) also expects seven to eight million new jobs to be created worldwide by the transition to a circular economy by 2030. More and more use cases show that circularity makes not only ecological but also economic sense. For instance, the German Cabka Group annually produces pallets and crates from some 150,000 tons of recycled plastics by their own accounts – proving thereby how waste can be turned into valuable products.
Plastics industry: a key sector with catching up to do
The plastics industry plays a pivotal role in this transformation. In 2023 413.8 million tons of plastics were produced worldwide, according to Plastics Europe, but the share of recycled materials continues to be low: only 8.7% of plastics were recycled – most of them by mechanical recycling – whereas the lion’s share was incinerated or landfilled. This is happening even though recyclates hold an enormous potential. Their production requires markedly less energy than the production of new products from fossil raw materials, thereby substantially reducing CO₂ emissions. On top of this, their use increases supply security – a factor of rising importance in times of geopolitical crises.
However, recycling is technically demanding – and often more expensive than producing new plastics. After all, post-consumer plastics have to be sorted, cleaned and prepared with great effort. In addition, the legal requirements are strict, high-quality recyclates scarce and many processes energy-intensive – all resulting in higher production costs compared to new plastics. “But nobody wants to pay higher costs,” stresses Ulrich Reifenhäuser, Chairman of the K Advisory Board. “Plastics are so successful because they are so much better than other materials. But the transition to the circular economy costs money. This cost issue will not be overcome without regulatory requirements.”
However, the responses to the question of how the transition to a functioning circular economy will work vary from country to country.
Europe looks to regulation
While other nations focus on voluntary commitments and market-oriented solutions, Europe regulates by law. Strategies such as the “Circular Economy Action Plan” (CEAP) and regulations such as the Packaging and Packaging Waste Regulation (PPWR) and the Single-Use Packaging Directive (SUPD) drive the transition to circularity by means of recycling rate, mandatory recyclate content and Extended Producer Responsibility (EPR). The PPWR shows how this works: since 2025 single-use PET bottles have to contain a minimum of 25% recycled plastic and this percentage will go up 30% by 2030. For manufacturers such as Coca-Cola or Nestlé this means rebuilding their supply chains, sourcing high-quality recyclates, adapting production – otherwise they run the risk of a sales ban. The SUPD is also having an impact: in Lithuania the return rate of PET bottles shot up from 34% to 92% after the introduction of a deposit system – in as little as two years. Companies face major challenges in the process: the limited availability of high-quality recyclates, the technical complexity of changing over to a recycling-friendly design – not forgetting the short deadlines set for complying with these often complex requirements.
Chemical ingredients are also increasingly moving into the focus of the EU. Especially disputed is the handling of PFAS since a ban could make recycling considerably more difficult – because plenty of waste plastics would then be classified as contaminated and eliminated from the circular economy. Wolfgang Große Entrup, Director General of VCI, therefore warns against a blanket ban: “With each individual substance banned in the EU the risk grows that more of our industry players move to less regulated regions. This, however, does not solve the original problem.”
Asia: between advances and structural deficits
Accounting for 53% of global plastics production Asia is the main player – and the main source of plastic waste. While some countries pursue ambitious recycling strategies, others lack the basic infrastructure.
China’s circularity offensive: centrally controlled, consistently implemented
For a long time, China was the biggest importer of plastic waste, now the country is recharting its course. By adopting its “National Sword Policy” the country has stopped the imports of unsorted plastic waste and is now driving the expansion of own recycling structures. The 14th 5-year plan focuses on modern collection and sorting systems and promotes both mechanical and chemical recycling. By 2035 the industry aims to be largely decarbonised and have transited to closed material cycles. This strategy is accompanied by the “Circular Economy Promotion Law”, which obliges companies to take back and safely dispose of specific products, and the establishment of the state-owned “China Resources Recycling Group” with the aim of centrally controlling the transformation.
Japan and South Korea: driving technology systematically
Japan and South Korea are among the pioneers in circular economy – not least due to clear political objectives and early-adopted legislation. In Japan the “Container and Packaging Recycling Act” has already obliged companies since the 1990s to participate in return and recycling systems. This is supported by the “Plastic Resource Circulation Act” adopted in 2022, which promotes recyclate use and prescribes detailed recycling plans for plastic products.
South Korea pursues a systemic, technology-driven approach via its new “Act for Promotion of Transition to a Circular Economy Society” (APTCES): binding recycling rates, clear requirements for sustainable product design as well as targeted regulation for hard-to-recycle products. In addition, companies wanting to place new recycling technologies on the market, are temporarily exempted from restrictions.
Unlike Europe, these two countries are banking on clear responsibilities, hands-on implementation and targeted innovation funding rather than detailed regulation. This approach is supported by high social acceptance and responsibility assumed across the board when it comes to waste separation and saving resources, for example.
From India to Indonesia: why the circular economy is faltering
In India the “Plastic Waste Management Rules” (PWMR) oblige companies to take back plastic waste. Despite this important step insufficient infrastructure and the varying regional applications of the rules remain a major challenge for a nation-wide implementation. Similar problems exist in Vietnam, where an EPR law was introduced in 2022. It holds manufacturers and importers accountable for seeing to the recyclability of their products.
In Thailand the “Plastic Waste Management Roadmap 2030” pursues the aim of recycling or energetically using 100% of plastic waste by 2027. There are local initiatives in Indonesia but there is no comprehensive national strategy. One objective is to drastically reduce the plastic waste that ends up in the sea by 2040.
Despite the progress made in these countries the regional fragmentation of waste management and the lack of infrastructure continue to pose a major challenge. Raising people’s awareness and stronger industry involvement will make or break the success of these measures.
North America: a patchwork of strategies
In North America circularity strategies are heavily fragmented. The US is pursuing an approach that comprises both state initiatives and private business measures. 33 US states have established EPR programmes, which oblige manufacturers of single-use packaging to financially participate in waste management. By 2032 100% of packaging is to be recyclable or compostable, and 65% of one-way packaging be recycled. Other states, however, lag behind. There is also another reason why plastic recycling in the USA only has a low uptake compared to the rest of the world, despite modern recycling technologies: “There is neither a national nor a state-wide recycling programme that would cover at least a complete federal state. Instead, individual cities and municipalities decide whether, how and which waste they collect and sort,” explains the German federal economic promotion agency, Germany Trade & Invest (GTAI).
Canada pursues a more comprehensive approach to promote the circular economy. The government has introduced the “Federal Plastics Registry”, a national registry for plastics to collect data about the production, use and disposal of plastics. It is designed to increase transparency and make for more effective plastic management. The “Action Plan on Zero Plastic Waste” aims to reduce plastic waste and establish a circular economy for plastics. It includes measures for reducing single-use plastics and promoting reuse and recycling. Beyond this, a gradual approach is pursued to reduce plastic waste by banning single-use plastic products and introducing EPR.
South America has a long way to go
In South America the circular economy is still in its infancy – some 90% of waste ends up at landfills and recycling is only of secondary importance. Chile, Colombia and Brazil have national return and circularity schemes such as Chile’s “Ley REP”, Colombia’s “Basura Cero” initiative or voluntary industry solutions in Brazil. Uruguay banks on consistent waste management with its Integrated Waste Management Act (Ley 19.829) and promotes packaging recycling. Despite various advances and initiatives, however, infrastructure remains insufficient in many South American regions and success will depend on further state investment, international cooperation and stronger awareness raising among the population.
Summary & Outlook
The circular economy is both an obligation and opportunity alike for the plastics industry. Europe pursues a strictly regulatory approach, Asia combines state regulations with technology offensives while in the Americas the spectrum ranges from ambitious requirements to a patchwork of isolated measures or confidence in the invisible hand of the market.
But every circular economy model has its pitfalls: regulation creates clear rules but can lead to excessive bureaucracy and lack of investment – a risk that becomes increasingly perceivable in Europe. “To avoid a slowing down of the transformation we urgently need measures to make investment in the production of circularity-ready plastics more attractive, reduce red tape caused by excessively long approval procedures to name but one, and to return to a level-playing field with our international competitors,” warns Virginia Janssens, Managing Director of Plastics Europe.
Market-based approaches promote innovations but do not guarantee nation-wide implementation. Centrally controlled strategies produce fast progress but run the risk of becoming inefficient. One thing is clear: without higher recycling rates and more recyclates the circular economy remains a patchwork. Those learning from each other can combine strengths and compensate for weaknesses.
Shaping the Circular Economy at K 2025
At K 2025 enterprises from the different sectors of industry – raw material production, machine building and processing – will flag up the major advances made so far as well as coherent future solutions for the circular economy under the guiding theme “Shaping the Circular Economy”. The numerous K Specials will also pick up on the topic, first and foremost the VDMA Dome. The VDMA (German Machinery and Equipment Manufacturers’ Association) will again host an extensive Forum on the outdoor premises in 2025, this time entitled “The Power of Plastics”. With 12 of its member companies it will demonstrate live on the premises between Halls 10 and 16 just how important technology is for implementing circularity in the plastics industry. In the official Special Plastics Shape the Future in Hall 6, organised by Plastics Europe Germany, the discussion forum on Thursday, 9 October, will come under the motto: “Circular Thursday: Transition – Resilience of the industry – which technologies will make the circular economy work?”
For more information on the Circular Economy go to: Circular Economy: Future of the Plastics Industry | K Trade Fair
K 2025 will be open daily from 10.00 am to 6.30 pm from Wednesday, 8 October, to Wednesday 15 October. Tickets are available online from 15 April. 1-day admission tickets cost EUR 60, 3-day tickets are EUR 125. School pupils and students pay EUR 20 for a 1-day ticket.
About K in Düsseldorf:
K was held by Messe Düsseldorf for the first time in 1952 and is now held every 3 years. The latest edition of K in 2022 registered 3,020 exhibitors from 59 countries on 177,516 m² net exhibition space and 177,486 trade visitors, 71% of whom came from abroad. For more information go to www.k-online.com.
