K 2025: ENGEL focuses on digitalisation, automation and sustainability
12.06.2025
"ENGEL stands for technologically leading injection moulding solutions that combine maximum efficiency with customised customer orientation."
Heads up! Novel Technology Redefining Holographic Windshield Displays
14.04.2025
A German-Scottish-US partnership has jointly developed technology that advances holographic transparent displays on vehicle windshields.
FAQ on Plagiarism Protection in the Plastics Industry
19.03.2025
Only the best get copied. However, for companies in the plastics industry, it is hardly a reason to celebrate when their own products are imitated. Product piracy causes significant economic damage and endangers innovation. Especially in the plastics sector, where technological progress and material quality are essential, counterfeits can have serious consequences.
Global Recycling Day: The Status Quo in Plastic Recycling
05.03.2025
Waste volumes are increasing, natural resources are limited and the environment is facing major challenges. Recycling is an important part of the solution – but where do we actually stand? On Global Recycling Day, 18 March, we take a closer look at the progress, challenges, and necessary changes within the plastics industry.
Ultrasonic welding of plastic: joining technology for adhesive-free applications
20.02.2025
Anyone who has ever had to wear a plaster for a long time knows that this can sometimes irritate the skin. This is often triggered by the adhesives that hold the individual layers of a plaster together. Medical wearables, such as CGM sensors for diabetics, are also often glued together.
Doğa Expands PET Bottle Recycling Capacity in Türkiye
03.01.2025
Istanbul-based construction firm Doğa has launched a cutting-edge PET bottle recycling facility in Kırklareli, Türkiye. Operating under the name Doğapet, the facility features two advanced Starlinger recycling lines, producing up to 28,000 tons of food-grade recycled PET annually. This investment highlights Doğa's commitment to promoting sustainability through innovative recycling technologies.
Enhanced Efficiency with Advanced Automation Software
23.12.2024
Semoulin Packaging, a Belgian family business specializing in paper bags and printed reels, is embracing cutting-edge automation to improve quality and consistency. The integration of W&H's advanced inspection software is setting new standards in production reliability and efficiency.
Economical Plastics Recycling for the Injection Moulding Industry
04.12.2024
Rising raw material prices, sustainability pressure and the development of a circular economy are presenting the injection molding industry with new challenges. With in-house recycling, which integrates waste directly back into production, WITTMANN offers a solution that not only reduces costs but also protects the environment.
Sustainable plastics production through bio-based carbon capture in Finland
15.11.2024
In Espoo, Finland, VTT (Technological Research Institute Finland) and LUT University, in cooperation with industrial partners, have opened a pilot plant that converts carbon dioxide into high-quality plastic raw materials in an innovative way.
Reifenhäuser Expands Service Capacity in Middle East and Africa
04.11.2024
By establishing a new Service Hub, Reifenhäuser aims to improve customer proximity and operational efficiency, underlining its commitment to reliable, responsive support.
From mechanical engineering studies to the award for young talent in plastics technology
16.10.2024
The more insights, the broader the knowledge and experience - that's what Marcel Piechnik realized during his studies. At the same time, he discovered his enthusiasm for plastics. In many different areas, he has deepened his insights into plastics and their variety.
Samsara Eco and NILIT to Establish Nylon 6,6 Recycling Facility
14.10.2024
The plant, expected to be operational by late 2026, will enable circularity in the textile industry, offering high-quality recycled polymers for brand use.
Recycling and reusing ABS plastics in-house
02.10.2024
Recycling on your own doorstep sounds almost too good to be true. But it is possible, as the Hansgrohe Group in Offenburg shows. The special highlight is that Hansgrohe, in partnership with ImpulsTec GmbH, has succeeded in recycling galvanized plastics. This means that decoated ABS plastics can be recycled directly in the company.
EcoCompact® II: Enhanced 2-Meter Stretch Film Line with Maximum Flexibility
27.09.2024
The new 2-meter EcoCompact® II from SML offers innovative advancements, combining compact design, cutting-edge technology, and improved flexibility. With up to seven extruders and enhanced winding options, this fully revised stretch film line is designed to meet evolving industry needs at an affordable price.
Oerlikon Polymer Processing Solutions: Sustainable Technologies for Central Asia's Textile Industry
16.09.2024
Oerlikon Polymer Processing Solutions is driving sustainable innovations for the growing textile industry in Central Asia. From polycondensation plants to textured yarns, the company offers complete machinery solutions tailored to meet the evolving needs of the Uzbek market. With a focus on energy efficiency and high yarn quality, Oerlikon is set to make a significant impact in the region.
Neste and Mitsubishi Corporation Form Strategic Partnership
23.08.2024
Neste Corporation and Mitsubishi Corporation (MC) have announced a strategic collaboration to develop value chains for renewable chemicals and plastics. This initiative focuses on supporting Japanese brands across various industries, including food and beverage, apparel, and consumer electronics, to reduce greenhouse gas (GHG) emissions and reliance on fossil resources.
Advancing Circular Economy in the GCC Region
26.07.2024
Recycling Services LLC, a prominent plastic recycler in Oman and Saudi Arabia, has joined forces with POLYSTAR to bolster the circular economy in the GCC region. This partnership, initiated with the acquisition of POLYSTAR's Repro-Flex 120 machine, aims to transform plastic waste into reusable materials, fostering sustainability and economic diversification.
Global Impact Coalition: Net-zero Chemical Industry
19.07.2024
Charlie Tan has his work cut out for him. The 30-something, London-born Brit/Malay last November became CEO of the newly reconstituted Global Impact Coalition (GIC). The GIC has the stated aim of transforming the global chemical industry to net-zero by 2050.
Bioplastics Made of Olive Pits
05.07.2024
Biolive, a pioneering biotechnology company, has launched a new biopolymer production facility in Istanbul, Türkiye, capable of producing 9,600 tons annually. Using olive pits as raw material, this innovative process aims to replace fossil-based plastics, offering a sustainable solution for the plastics industry.
Sustainable PET Film Recycling Solutions
04.07.2024
Leonhard Kurz will be presenting new sustainable recycling solutions for PET film at drupa 2024. In a video interview, Markus Hoffmann, Member of the Board at Leonhard Kurz, explains how the company takes back and reuses used PET film to promote the Circular Economy. The DM Maxliner 3D machine, which impresses with its efficiency and versatility, is also presented.
VDMA Calls for Courage and Innovation in Difficult Times
27.06.2024
The associations of the plastics and rubber machinery industry are facing significant challenges. Geopolitical changes, high energy costs, and declining order intakes require new strategies and bold decisions.
Sustainability thanks to the circular economy
26.06.2024
How does the circular economy work? Focus on sustainable practices and environmental benefits.
Innovative extrusion process reduces odor in post-consumer plastic recycling
17.06.2024
Post-consumer plastic recycling faces a persistent challenge: unpleasant odors. Addressing this issue, Maris has unveiled a pioneering extrusion process tailored to tackle odorous contamination effectively.
World's First Electrically Heated Steam Cracking Furnace
27.05.2024
BASF, SABIC, and Linde have inaugurated the world's first large-scale electrically heated steam cracking furnace at BASF's Verbund site in Ludwigshafen, Germany. This demonstration plant, which consumes 6 megawatts of renewable electrical energy, is designed to test the technology's potential to reduce carbon dioxide emissions by at least 90% compared to conventional steam crackers.
Machine crochet for textiles and components
23.05.2024
When it comes to crocheting, many people think of a leisure hobby. However, this technique can be used to manufacture impressive products such as components made from fiber composites. In an interview with K-Mag, Jan Lukas Storck from Bielefeld University of Applied Sciences explains how a newly developed crochet machine works and how it contributes to automation.
Foxbase: Start-up with a vision
22.05.2024
The Foxbase platform makes B2B sales processes more efficient. CTO Carsten Dolch and CEO Benjamin Dammertz explain how setting up the software and integrating AI helps improve customer interactions. Various industries, including the plastics industry, benefit from the flexibility and efficiency of this solution. Find out more in the video.
"Industrial communication will change”
20.05.2024
Industry interview on OPC UA with Dana Ford, Auxiliary Controls Engineer for Material Handling/Auxiliary at Wittmann Inc.
OPC UA significantly simplifies processes
30.04.2024
Industry interview with Georg Kiesl, General Manager at Billion SAS on the spread of the OPC UA standard in the USA.
Stretching Machine for Masterbatch Development
26.04.2024
LyondellBasell, a prominent player in the chemical industry, has recently integrated the state-of-the-art KARO® 5.0 laboratory stretching machine from Brückner Maschinenbau into its research and development facilities in Ohio. This strategic enhancement is set to significantly advance the company's ability to develop and test masterbatch solutions tailored for various oriented film applications.
All-Electric Injection Molding for Thin-Wall Packaging
08.04.2024
Heinrich Axmann GmbH & Co. KG in Cologne, Germany, has made a significant shift towards sustainability by adopting an all-electric injection molding machine, the EcoPower Xpress, provided by WITTMANN. This move has led to a reduction in energy consumption by over 30% for producing thin-walled packaging, marking a significant step towards eco-friendly production methods.
PLASTICS and VDMA must work together on OPC UA
22.03.2024
Industry interview on OPC UA with Glenn Anderson, Chief Operating Officer at the Plastics Industry Association (PLASTICS) and Thorsten Kühmann, Managing Director of the VDMA Plastics and Rubber Machinery Association
System technology: energy efficiency in the plastics industry
20.03.2024
The plastics industry faces the challenge of harmonising efficiency and sustainability without compromising on performance. With a unique portfolio of products and services, ONI-Wärmetrafo supports plastics processing companies in becoming more energy-efficient and environmentally friendly, which is of immense importance, especially in times of rising energy prices.
BEAD.MACHINE sets new standards in particle foam processing
31.01.2024
Particle foam offers a wide range of applications - from automotive to packaging and lifestyle. The BEAD.MACHINE from Siegfried Hofmann GmbH marks a significant advance in the processing of this versatile class of materials: it enables the efficient production of complex moulded particle foam parts, setting new standards in terms of product quality and environmental friendliness.
ENGEL St. Valentin wins production contest
19.01.2024
The ENGEL large-scale machine plant in St. Valentin was named "Factory of the Year 2023" in Austria, winning both the overall award and the "Efficient Factory" category at the factory conference in Bludenz. The award is based on outstanding results in various categories, including a sustainability strategy.
Coperion Recycling Innovation Center is Up and Running
05.01.2024
Coperion has opened its Recycling Innovation Center, providing a high-tech test facility for comprehensive testing of plastics recycling processes. The center complements Herbold Meckesheim's technical center and enables customers to simulate the entire recycling process and test technologies before making an investment.
Laboratory extruder relaunched: ZE 28 BluePower
22.12.2023
KraussMaffei Extrusion GmbH recently presented the ZE 28 BluePower high-performance laboratory extruder in a new design. Higher efficiency, shorter delivery times and greater cost-effectiveness were the focus of this development.
Working in the plastics industry
19.12.2023
The plastics industry offers a wide range of career paths in various disciplines. Each has its own focus and gives the opportunity to promote sustainability in the industry.
traceless materials secures €36.6 Million Series A to build first industry plant for bio-circular alternative to plastic
01.12.2023
The bioeconomy start-up traceless materials has closed a financing round of 36.6 million euros, led by UB Forest Industry Green Growth Fund and SWEN Blue Ocean. The company produces a sustainable biomaterial that serves as an alternative to plastic and combats plastic pollution.
AI-based sorting: the smart way to recycle plastics
22.11.2023
AI is revolutionizing the way we handle plastic sorting and plastic recycling. By integrating AI software into recycling plastic waste processes, companies like STEINERT and RE Plano are setting new standards in plastic recycling technology. In this interview, Michael Köster discusses how AI-powered sorting systems improve the efficiency and quality of plastic waste recycling.
ENGEL Software: Driving Digital Transformation in Injection Molding
20.11.2023
ENGEL is gradually expanding its customer portal e-connect into a production portal. In addition, a solution from the inject 4.0 family for bidirectional data exchange between simulation and injection molding machine has been expanded and now also works with MOLDEX3D.
25 years technology centre at Brückner – expansion in sight
06.11.2023
Brückner Maschinenbau established a technology center 25 years ago, specializing in film stretching technologies. It has since become a crucial hub for research and development in the film industry, and they plan to expand the center to meet new challenges, including the use of recycled materials and bio plastics, energy production films, and membrane technologies.
Reifenhäuser relies on new "Circular Plastics Traceability" Guideline by using digital product passports from R-Cycle
06.11.2023
The Reifenhäuser Group uses R-Cycle, a digital product passport for plastics based on GS1 standards, to enable its customers to trace products. This facilitates data management in the manufacturing process and promotes the recycling of plastic packaging.
Wilson Sporting Goods using 3D printing to accelerate the injection molding process
03.11.2023
Wilson Sporting Goods uses 3D printing to accelerate the injection molding process of baseball bats. This includes bats made from aluminum, polymer composite and thermoplastics. Components such as knobs, end caps and the interface between the handle and shaft are typically injection molded from engineering resins.
Start-up recycles plastic lab waste into new test tubes and petri dishes
20.10.2023
LabCycle, co-founded by a University of Bath graduate, opens the UK's first pilot plant for recycling plastic lab waste into new lab consumables and aims to scale the technology for healthcare and research labs. Their process turns plastic waste into high-grade pellets, reducing energy and water use and promoting recycling in a circular economy approach.
Chemical recycling: the supreme discipline for the Circular Economy in the plastics industry?
11.10.2023
Almost 90 % of all plastic packaging today still consists of virgin material. If we want to change this, we have to focus on chemical recycling in addition to mechanical recycling. According to the WWF study "Verpackungswende jetzt", a system change could save more than 20 million tonnes of new plastic by 2040. SÜDPACK is therefore investing in innovative chemical recycling technology.
Extrupet again chooses PET recycling technology from EREMA
10.10.2023
Extrupet will expand its PET recycling capacity in South Africa with a VACUNITE® from EREMA in June 2024 to meet growing demand for its PhoenixPET® recyclate. This decision comes as part of a long-standing partnership that began back in 2009, and will enable the planned expansion into East Africa and Nigeria with further plants for food-grade rPET.
New material recovery facility opened in Banyuwangi under Project STOP's expansion program
02.10.2023
On September 16, a large materials recovery facility was inaugurated in Songgon Municipality, Indonesia, built in collaboration with the Banyuwangi Regional Government. Project STOP Banyuwangi, supported by various stakeholders, aims to establish a circular waste management system in Indonesia and achieve positive environmental impacts.
Recycling programme for engineering plastics
22.09.2023
Wherever there is movement in manufacturing, the plastic plain bearings and energy guiding chains from igus can be used. Even in packaging machines, e-chains and plain bearings made of high-performance polymers ensure movement. The products are durable but at some point they also have to be disposed of. igus has set up its own recycling programme for this purpose.
Making the impossible possible: Recycling multilayer packaging
13.09.2023
Was multilayer packaging the Achilles' heel of the recycling industry? Not anymore, according to Krones and their project partners BASF, Südpack, and Tomra. Together, they're unveiling a solution that accomplishes what was once deemed impossible. At the heart of this innovation is a new adhesive that enables effective material separation during the recycling process.
Smart Waste: how AI can increase the recycling rate of plastics
23.08.2023
Nine percent – that is the proportion of all plastic waste that was recycled from 1950 to 2015. This must change urgently. Artificial intelligence can help. EREMA and the Software Competence Center Hagenberg (SCCH) are researching exactly how in a joint project.
"There must not be a cannibalisation of material flows"
16.08.2023
"Unlike mechanical recycling, chemical recycling breaks down these compounds instead of utilising existing polymers as material."
Challenge accepted: PET recycling in Myanmar
10.08.2023
Before new processes are established, an analysis of the current situation is usually carried out. For the recycling of PET bottles in Yangon, Myanmar, the Italian manufacturer SOREMA and the local recycler Commercial Plastics Co. did just that. After conducting washing and recycling tests on bottles collected there, SOREMA designed a flake production line.
Asahi Kasei and Mitsui establish supply and procurement system for bio-methanol
03.08.2023
Asahi Kasei Corporation and Mitsui & Co, Ltd will establish a supply and procurement system for biomethanol produced in the United States. Asahi Kasei plans to use the bio-methanol from Mitsui to produce engineering plastics in Japan with a lower carbon footprint.
BASF breaks ground on polyethylene plant at Zhanjiang Verbund site in China
20.07.2023
BASF has broken ground on a polyethylene (PE) plant at its Verbund site in Zhanjiang, China to serve fast-growing demand in China. The plant, with a capacity of 500,000 metric tons per year, is scheduled to start up in 2025.
"Recyclates from chemical recycling will be more expensive than virgin material"
14.07.2023
Mechanical recycling processes have already matured. Chemical recycling is comparatively young. But will it be able to establish itself?
Breaking boundaries: Delivering gigantic injection molding machines across continents
03.07.2023
8000 tons in weight, a good 30 meters long – how do you manage to ship such a gigantic injection moulding machine across the big pond? In an industry where logistics and size present special challenges, ENGEL has managed to master them with expertise and a cooperative approach.
Productivity management via app: capturing and understanding machine data
21.06.2023
Efficient work only works when everything runs smoothly – also on the shop floor. But how do I know how busy and productive my machines are at the moment? This requires data that reflect reality, but which is often still lacking today. ENLYZE has developed an analysis platform that can close this gap and make production more efficient.
KraussMaffei presents special edition of the CX series
15.06.2023
To mark the 185th anniversary of the company, KraussMaffei is offering a special edition of the CX series with free additional equipment. The additional package with extensive functions reduces operating costs and increases quality in production. The company follows the motto: "RelaCX – it's a CX".
Faster mould set-up – more efficient production
01.06.2023
ENGEL helps injection moulding processors optimize product changeover times through customized training and technologies such as the Setup wizard to achieve higher productivity, lower unit costs and more profit.
First PET Bottle-to-Bottle Recycling Line in Kenya
12.04.2023
Megh Group company T3 (EPZ) Limited is going to install the first PET recycling system for bottle-grade rPET and resin in Kenya and Eastern Africa, a Starlinger recoSTAR PET 165 HC iV+ recycling line, in Athi River just outside Nairobi.
EREMA Group focuses research and development on circular economy for PET fibres
22.11.2022
With its new business unit "Fibres and Textiles", the EREMA Group is intensifying the development of recycling solutions focusing on PET fibre materials that are produced in fibre production and in further processing steps. In a dedicated fiber pilot plant, a cross-company team is working on recycling solutions for fiber-to-fiber applications.
EREMA: "PredictOn:Drive", a new tool for predictive maintenance
04.11.2022
Real-time visualisation of process and machine data holds great potential for the circular economy as a whole and for recycling processes in particular. At K 2022 EREMA launched "PredictOn:Drive", a predictive maintenance application for its recycling machines.
Machine monitoring: performance data via app at any time
26.10.2022
Steinert.view® is a flexible and reliable monitoring solution for STEINERT sensor-based sorting machines. Performance data collected is visualized in a web app so that operators can see at a glance whether machines are currently producing, whether there are changes in production, or whether there is potential for optimization.
A true all-rounder: with two apprenticeships to become a turnkey expert
27.09.2022
Oliver Fuss has completed not one, but two apprenticeships at Arburg: first an apprenticeship as a mechatronics technician and then as a process mechanic for plastics and rubber technology. Now he works in the turnkey division, where fully automated manufacturing cells are designed and built.
Sustainability by digitalization: Inventory machines become capable of communication
13.09.2022
What's old is far from bad. This also applies to machines - however, they are often not capable of communicating. Yet it is precisely this ability that is of interest when it comes to evaluating data or correcting errors. Injection molding machine manufacturer Steinl has found a way to connect even older machines to a communication network.
Augmented Reality in the plastics industry: individualized instructions for the entire product life cycle
25.08.2022
Individualization is the trend. In the plastics industry, too, more and more individualized machines are coming onto the market. Of course, these machines also require individualized manuals with instructions tailored specifically to them. However, this is not yet a reality today. The AdaptAR project wants to change that – with the help of Augmented Reality and an app.
Digitization, automation, networking: "We have the whole wide bandwidth!"
09.08.2022
Twenty-year-old Yannick Herzog trained as an electronics technician for automation technology at Arburg and now works in the company's printed circuit board production. Since August 2021, he has been responsible for SPI and AOI for quality control of printed and assembled PCBs, respectively, in a production line. These are used in the control systems of the Arburg machines.
Product development in Alpla's One-Stop Shop
02.08.2022
Those who work meticulously to design a product can hardly await the day they can hold the finished item in their hands. Alpla is a company headquartered in Hard, Austria, that speeds up this process. Customers can convert their ideas into reality and ideally leave Alpla's STUDIOa with a prototype in hand.
The "new KraussMaffei" is to be climate-neutral by 2030
25.07.2022
The KraussMaffei company confirms a sustainable corporate strategy: Climate neutrality in eight years. The consistent focus is on Circular Economy. One of the largest roof-mounted photovoltaic systems in Europe is currently being built at the new main plant in Parsdorf.
North American plastics sector holds steady, while riding a roller-coaster of uncertainty
08.07.2022
The pandemic. Supply chain ruptures. The Great Resignation. China trade tensions. Climate change and extreme weather events. Soaring inflation. Stock market volatility. The war in Ukraine. Seldom in our lifetimes have we experienced such an extended period of disruption and uncertainty.
Using different tools in one flexible thermoforming system
29.06.2022
Thermoforming is a process that requires various tool systems. Unfortunately, if the latter originate from different manufacturers, they often cannot be used together in one system. Illig took on the challenge and came up with a successful solution.
A digital product passport for more sustainability
21.06.2022
The EU's Circular Economy Action Plan stipulates that by 2050 all plastic packaging must be completely recyclable and consist of at least 70 percent recycled material. The majority of plastic waste still ends up in landfills or incinerators – in the worst case, in the environment.
Durostone CR permits higher loads and more compact transformer designs
06.06.2022
Röchling Industrial has developed a new glass fiber-reinforced plastic Durostone® CR. "CR" stands for Compact & Resilient. Compared to conventional fiber-reinforced composites, Durostone® CR has a high dielectric strength and a high partial discharge insertion stress.
New cutting-edge thermoplastic materials for the aerospace sector
23.05.2022
In the HITCOMP project (High Temperature Characterization and Modelling of Thermoplastic Composites), thermoplastic materials were investigated in the aerospace sector. The researchers concluded that thermoplastic-based components are more efficient than thermosetting plastic composites in terms of their thermal properties.
Made up out of thin air
19.05.2022
Innovations always emerge from something existing, something tried and tested. Approaching them in terms of their content requires a look at the fundamentals. This is also true for the question of how carbon dioxide (CO2) from exhaust gases can be used for the production of plastics.
Training in the plastics industry: technical college and companies get trainees fit for the job
06.05.2022
At 16, did you already know where you wanted to go on your professional journey? With the range of choices available to young people today, it can be difficult to make a decision at first glance. That's why it's beneficial to be taken by the hand and introduced to different professions. Wentus GmbH from Höxter sets a good example.
Mobile plastics recycling project wins WDO's World Design Impact Prize
30.03.2022
The Montreal-based World Design Organization has named a mobile, solar-powered, plastic-waste upcycling platform as the winner of its World Design Impact Prize™ for 2021.
Same but different: say hello to the 3D printed trombone
25.03.2022
It looks and sounds like a standard trombone - but is actually lightweight and made of carbon fiber rather than brass metal. To craft the musical instrument using this raw material, additive manufacturing is the right application for success: the process provides great options to manufacture the relevant molds used to build the instrument.
App, AI, data glasses: digital toolbox for the plastics industry is well filled
28.02.2022
We live in a world in which processes are becoming increasingly complex. This also applies to the plastics industry. One way to support people in production with their demanding tasks is through digital tools – and not only on site at the plant, but also remotely. The increasing amount of data also contributes to predictive maintenance of machines.
Breakthrough in separating plastic waste
21.02.2022
With a new technology it is possible to analyse and categorise the type of plastic by using a hyperspectral camera in the infrared area and machine learning. The technology makes it possible to separate plastics based on a purer chemical composition than is possible today, and this opens up for completely new opportunities to recycle plastics.
Digital watermarks: sort post-consumer waste more intelligently
16.02.2022
How can plastic packaging become intelligent? By providing them with digital watermarks that can be read by sorting systems and thus simplify the sorting process. The fact that this technology works was proven in the pioneering HolyGrail 1.0 project with a proof of concept.
Young plastics researchers are on the trail of proper recycling
07.01.2022
The Pöppelmann Research Week on the topic of "Plastics and Recycling" brought young people closer to the topics of plastics and recycling.
Turning a problem into a solution: Wasser 3.0 studies ways to remove microplastics from water without a filter
15.12.2021
Plastic is an important material and a virtually irreplaceable component in many products. However, the breakdown and disposal of plastics after use also goes along with microplastics. At the end of its life cycle, plastic material first ends up in the environment and then comes back to us: a study has found that we ingest about five grams of plastic every week without realizing it.
"The process window is very narrow and must be exactly controlled."
08.12.2021
What are the parameters that actually matter when it comes to wear protection? An interview with Anna Rottstegge, Head of Research & Development at Reifenhäuser Reiloy.
Recycling: PolyWaste technology wants to make the term "plastic waste" obsolete
03.11.2021
It's no secret, and yet the numbers are shocking: less than one-tenth of the total amount of plastic produced to date has been recycled. Currently, the rate is 14 percent worldwide. A full 32 percent ends up in the environment. This urgently needs to change – which is what the Australian company PlasTech Recycling Limited thought as well. And so they developed an innovative technology.
"If you never ask, you'll never know" – traineeship in plastics extrusion
12.10.2021
There is a desperate need for skilled workers in the plastics industry. Yet the industry has a lot to offer. Reifenhäuser GmbH also proves this with its diverse range of training programs.
Clean room production of breast implants
14.09.2021
The Fraunhofer IPT has teamed up with BelloSeno GmbH to study biocompatible implants that are made using 3D printing. Kai Janning from the Fraunhofer IPT describes the conditions a medical device production facility must meet and reveals the latest successes of the researchers.
The many ways that 'going digital' is changing manufacturing
23.08.2021
There are many aspects and forms of digitalization in manufacturing, ranging from Industry 4.0, the Internet of Things (IoT), artificial intelligence and additive manufacturing, to augmented and virtual reality, 5G connectivity, mobile apps, blockchain technology, and more.
Sensor-based symphony: sorting and recycling in perfect harmony
30.07.2021
What can be recycled, and what can't? Sorting waste is a challenge – for both people and machines. TOMRA, pioneer in this field has introduced its new generation AUTOSORT in 2020 under the motto "Symphony of all sorts". This is intended to take the plastics industry a big step further towards sustainability.
Cleaning up the polluted edge of the world: Lindner and Comberplast recycle fishing nets
31.05.2021
Presented at K 2019 in Düsseldorf and now used to clean up the edge of the world: Lindner Recyclingtech’s Micromat 1500. Circular economy pioneer Comberplast has been using the machine to successfully shred old fishing nets and ropes collected from the coast of Patagonia.