Shinepoly® LP2085 Impact modifier
Shinepoly® LP2085 modifier is a core-shell impact modifier with high Silicon rubber content that prodives superior low temperature impact performance. Because of the core-shell structure, the improvement in impact performance is obtained with only minor effect on other mechanical properties such as modulus and heat distortion temperature.
Shinepoly® LP2085 modifier also provides the following benefits:
* Widely used in both engineering plastic and general plastic.
* High impact efficiency at low addition
* Flame retardancy, smoke suppression
* wetting and lubrication
Appearance: Free-flowing white powder
Bulk density: 0.7g/cm3
Particle size: < 10mesh
Shinepoly® LP2085 is especially useful where low temperature impact is required. Mainly used for improving the impact resistance and ESCR of PC,PC/ABS,ABS,AS. The applications include automotive parts such asbumpers and body panels, appliances such as blender housings, housings for electronic components such as computers and cell phones, and thermoset adhesives.
Processing Guide: LP2085 can be directly added into the formulation during plastic compound extrusion.
Storage: 2 years, below 30℃. Store in a cool, dry place.
Packing: 20kg per carton.
Disclaimer: All information on this data sheet is based on laboratory testing and is not intended for design purposes. Shine Polymer makes no representations or warranties of any kind concerning this data.