Hangzhou Juxing New Material Technology Co., Ltd.

No. 2 Shenban Road, Gongshu District , 324002 Hangzhou
China, People's Republic of

Telephone +86 571 28909371
Fax +86 571 88028105
dongxusales@china181.com

Trade fair hall

  • Hall 7, level 1 / E03-22
 Interactive Plan

Hall map

K 2016 hall map (Hall 7, level 1): stand E03-22

Fairground map

K 2016 fairground map: Hall 7, level 1

Our range of products

Product categories

  • 01  Raw materials, auxiliaries
  • 01.10  Additives
  • 01.10.105  Stabilizers

Our products

Product category: Stabilizers

DX-590

Item No.: DX-590

Product introduction

DX-590 is an unleaded, high efficient and multi-functional PVC stabilizer which possesses high efficient, long term stability and good early color stability.

Excellent ductility and low-temperature impact strength retention of PVC pipe provided by the multi-functional compound. The pipe is clear, white, delicate and fine with good early color stability. The wide rang of processing is especially suitable for double-screw extrusion. The good balance of internal and external lubrication makes the operating formula simpler and more convenient. Granule appearance is applied to the production of automatic machine of mixing materials.

Product properties

Stability: It can be used to produce PVC pipe with big caliber owing to the good heat stability.

Process: The excellent high-temperature color stability and long-term dynamic stability provided by DX-181. Without fouling, the time of cleaning equipment is shortened. Granule product is more suitable for automatic system for mixing materials and multi-functional compound performance make the formula simpler and more convenient.

Amount: on the same condition, the amount of DX-590 is 10% less than that of calcium and zinc compound stabilizer but they can achieve the same effect. And it can replace lead salt compound stabilizer with the same amount in pipe extrusion.

Safety: The product is high efficient and environment-friendly without any heavy metal.

Applications
PVC-M high impact pipe
UPVC water supplying pipe, drainage pipe
PVC electrical conduit
PVC communication pipe, two-wall rippled pipe, slat wall pipe, grid pipe
Rigid sealed strip

User notice

Package: the product is packed into paper bag with inner plastic bag, and the net weight is 25kg.
Transportation: The product is the heat stabilizer for processing PVC, and it is non-flammable and non-explosive.
Storage: The product should be stored in cool and dry place and should be sealed immediately after use.
Safety: Avoid any contact with mouth or eyes.
Note: The product contains sulfur. When it is mix-used with lead salt stabilizer, the product produced with the two stabilizers will become grey black. In order to maintain white, it shouldn’t be mixed.
Warranty period: 12 months

More Less

Product category: Stabilizers

Composite Heat Stabilizer For Pvc Pipe

Product introduction
DX-580 has high efficient and long term stability and good early color stability.
The pipe is clear, white, delicate and fine with excellent ductility and low-temperature impact strength retention. The wide rang of processing is especially suitable for double-screw extrusion.
Technical specification

Product properties
Stability: It can be used to produce PVC pipe with big caliber owing to the good heat stability.
Process: The excellent high-temperature color stability and long-term dynamic stability provided by DX-181. Without fouling, the time of cleaning equipment is shortened.
Amount: on the same condition, it shows its excellent cost performance.
Safety: The product is high efficient and environment-friendly without any heavy metal.
Applications
PVC-M highly impact pipe
UPVC drinking water pipe, drainage pipe
PVC electrical pipe
PVC communication pipe two-wall rippled pipe, slat wall pipe, grid pipe
Rigid sealed strip
User notice
Package: The product is packed into iron bucket with plastic coating or plastic bucket, and the net weight is 220kg per bucket.
Transportation: The product is the heat stabilizer for processing PVC, and it is non-flammable and non-explosive.
Storage: The iron bucket should be placed in cool and dry area with the storage temperature from 5 to 30°C. The bucket should be sealed immediately after use.
Safety: Avoid any contact with mouth, eyes and skin. In case of contact with skin, wash thoroughly with soap and water immediately. In case of contact with eyes or mouth, flush with water immediately and get medical attention. The work place should be ventilated so as to avoid inhaling evaporated gas directly in the production operation.
Environment: According to environment safety standards of Occupational Safety & Health Administration (OSHA), including the standard of tin use for all the industries. TWA (eight hours average value) is 0.1mg/m3 (tin); short-time exposure value is 0.2mg/m3
Note: The product contains sulfur. When it is mix-used with lead salt stabilizer, the product produced with the two stabilizers will become grey black. In order to maintain white, it shouldn’t be mixed.
Warranty period: 12 months

More Less

Product category: Stabilizers

Dimethyl Tin Oxide

Chemical name: Dimethyl Tin Oxide CAS: 2273-45-2
Main applications
Mainly used for producing PVC heat stabilizer. It can work as catalyst for the production of powder coating, polyester resin and some antioxidant
Technical Specification

Package: It is packed into drum, and the net weight is 25kg per drum.

Transportation: loading and unloading should be carefully and gently, damage of packing is forbidden in transportation. If damage is found, it should be sealed tightly immediately or dilute it with a lot of water when it is hard to seal.

Storage: The product should be placed in cool and dry area with the storage temperature from 5 to 30℃ and sealed immediately after use.

Safety: Avoid any contact with mouth, eyes and skin. In case of contact with skin, wash thoroughly with soap and water immediately. In case of contact with eyes or mouth, flush with water immediately and get medical attention. The work place should be ventilated so as to avoid inhaling evaporated gas directly in the production operation.

Warranty period: 12 months

More Less

Product category: Stabilizers

Dimethyl Tin Dichloride

Name: Dimethyl Tin Dichloride
Formula: C2H6Cl2Sn
Structural formula: (CH3)2Sn Cl2
CAS: 753-73-1

More Less

Product category: Stabilizers

Methyl Tin Mercaptide

Heat Stability: DX-181 has high efficient heat stability and good early color stability.
Transparency: The products processed with DX-181 have superior transparency, clear color, little gas and no educt.
Process: The excellent high-temperature color stability and long-term dynamic stability provided by DX-181. Without fouling, the time of cleaning equipment is shortened. It is suitable for all kinds of process of flexible and rigid PVC, such as calendaring, extrusion, injection and blow molding, etc.
Amount: On the same condition, less methyl tin mercaptide compared with butyl tin or octyl tin can achieve the same effect.
Safety: The product of methyltin mercaptide has been approved by American FDA (21 CFR 178.2010) and certified by Germany BGA (IIA, 4C). It can be used in food packaging materials and water pipes etc. It’s safe and reliable.

Applications
PVC film (thermal shrinking packaging film, printing film, calendared film, twisting film)
PVC sheet (clear flexible and rigid sheet,istmas sheet, advertisement sheet, compound sheet)
PVC granule (granule, shell of electronic communication apparatus, etc.)
PVC building and construction materials (drinking water pipe and pipe fittings, chemical pipes, construction materials, profile etc.)
PVC medical apparatus (transfusion device, etc.), food packaging materials, daily-used appliances and others
User Notice

Package: The product is packed into iron drum with plastic coating or plastic bucket, and the net weight is 220kg per drum.
Transportation: The product is the heat stabilizer for processing PVC, and it is non-flammable and non-explosive.
Storage: The iron bucket should be placed in cool and dry area with the storage temperature from 5 to 30℃. The bucket should be sealed immediately after use.
Safety: Avoid any contact with mouth, eyes and skin. In case of contact with skin, wash thoroughly with soap and water immediately. In case of contact with eyes or mouth, flush with water immediately and get medical attention. The work place should be ventilated so as to avoid inhaling evaporated gas directly in the production operation.
Environment:: According to environment safety standards of Occupational Safety & Health Administration (OSHA), including the standard of tin use for all the industries. TWA (eight hours average value) is 0.1mg/m3 (tin); short-time exposure value is 0.2mg/m3
Warranty period: 12 months

More Less