02 Semi-finished products,parts and reinforced plastics
02.04 Product groups
04 Services for the plastics and rubber industrie
Product category: Polyamide PA 11
PA11 Mingamid P40
PA11 Mingamid P40 is a semi-crystalline unreinforced polyamide 11 of low viscosity, in black colour. It’s plasticized and stabilized against heat, illumination and mine aeration. Its characteristics are; good flexibility, good chemical, heat and UV resistance as well as good low-temperature impact strength, surface quality and processability.
PA12 Mingamid 6 N P0 is a semi crystalline unreinforced polyamide 12 of high viscosity in natural colour, it’s not plasticized but stabilizied against heat, illumination and mine aeration. It’s especially for pipe and profile extrusion application in the automotive industry and in industrial application.
PA12 Mingamid 14 N P40 is a low viscosity, semi-crystalline unreinforced polyamide 12 in natural colour, plasticized and stabilized against heat, illumination and mine aeration, good flexibility, good chemical, temperature and UV resistance, good low temperature impact strength, surface quality and processability. It’s suitable especially for pipe and profile extrusion application in the automotive industry and in industrial applications.
MingaPEEK 8 N Micro is a semi-crystalline unreinforced PEEK of high viscosity in natural colour with excellent mechanical and electrical proporties, outstanding surface slip and creep characteristics as well as high resistance to ageing, capability relating to impact strength, high temperature stability, continous operating temperature, outstanding chemical resistance and reaction to fire allow a wide range of application. MingaPEEK 8 N Micro is suitable for pressing application in the aviation, automotive, electronic, mechanical engineering, shipbuilding and chemical industry.
MingaPEEK 8 N is a semi-crystalline unreinforced PEEk of high viscosity in natural colour, excellent mechanical and electrical properties, slip and creep characteristics. It’s suitable for extrusion application in the aviation, automotive, electronic, mechanical engineering, shipbuilding and chemical industry.
HDPE Mingalen E2 is a mediuim-viscosity, black polyethylen with high density, good thoughness, elongation at break, good sliding performance, good abrasion resistance and very good weldability allow a widespread. It’s for extrusion applications, such as cable conduits, corrugated pipe, profile, cover and also for injection moulding application, such as muffle, cabinet, cover etc. qualified.
PP Mingaprop 6 S is a stabilized, medium viscosity and unreinforced polypropylen on copolymer basis, good stiffness and impact strength, good resistance to oxidation and good temperature resistance. The material is qualified for extrusion applications of rather thick-walled profile, strap and monofilament, as well as for injection moulding applications.
PP Mingaprop 1 S is a Polyproylen on homopolymer basis, stabilized, high viscosity and unreinforced, high stiffness, good restistance to oxidation and good temperature resistance. Is qualified for extrusion applications, such as sheet pipe, profile, wrought material and also injection moulding applications.
PVDF Mingafluor 1 N-S CO605 is a high viscosity, semi-crystalline PVDF copolymer in natural colour, good chemical resistance, good UV-resistance, good frictional and mechanical properties, good surface slip as well as good radiation resistance, good resistance to water absorption, acid, bases, lye, gases and high continous operating temperature. It’s suitable for extrusion application, plumberay and gas line.
PVDF Mingafluor 2T N is a thermoresistant, high viscosity PVDF homopolymer in natural colour, outstanding chemical and good UV-resistance, good frictional and mechanical properties, good surface slip as well as good radiation resistance, good resistance to water absorption, acid, bases, lye, gases and high continous operating temperature. The material is qualified for extrusion application, profile, pipe, sheet, blow moulding and compression moulding.
PVDF Mingafluor 2 N is a semi-crystalline unreinforced polyvinylidene fluoride in natural colour. It’s characteristics are; good resistance to chemicals, good UV, acid and radiation resistance, as well as a high continuous operating temperature and it‘s inheren flame resistance.
PVDF/PMMA Mingafluor 4, Compound is a semi-crystalline re-granulate of medium viscosity on the basis of PVDF/PMMA and Titandioxid. The material keep the properties of PVDF and is suitable for extrusion and injection moulding application.
PFA Mingafluor 2 N is a semi-crystalline unreinforced PFA of high viscosity in natural colour, outstanding chemical and temperature resistance, good flexibility, electrical properties, creep strength, melt strength, thermostability, toughness and environmental stress crack resistance (ESCR), low moisture absorption, smoke emission and water absorption. This PFA is suitable for coat, sealings, film and pipe for the chemical industry, aorospace, electro-techniks and electronics.
Minger Kunststofftechnik AG has been your expert in processing engineering plastics and high-performance plastics for over 30 years: We supply high-grade granules with consistent and reliable property profiles for high-quality fluoroplastics, polyamides, PEEK and other plastics. At Minger, we understand the significance of first-class materials for your final product; and we are aware that a conscious and sustainable approach to resource management is the way forward.