LABARA s.r.o.

Jindrichov 20 , 59501 Velka Bites
Czech Republic

Telephone +420 566533128
Fax +420 566533111
labara@labara.cz

Trade fair hall

  • Hall 8b / E43-12
 Interactive Plan

Hall map

K 2016 hall map (Hall 8b): stand E43-12

Fairground map

K 2016 fairground map: Hall 8b

Our range of products

Product categories

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.01  Processing technologies
  • 02.01.006  Parts made by mechanical treating
  • 02  Semi-finished products,parts and reinforced plastics
  • 02.04  Product groups
  • 02.04.001  Semi finished products
  • 02.04.001.15  other and machined semi finished products / Pre-cut parts
  • 02  Semi-finished products,parts and reinforced plastics
  • 02.05  Products
  • 02.05.015  Electrical installation material

Electrical installation material

Our products

Product category: Parts made by mechanical treating, other and machined semi finished products / Pre-cut parts

Glastherm

GLASTHERM - HEAT INSULATION SYSTEMS
 
High-strength, temperature resistant insulation made from glass fibre reinforced composite materials play a very important role in accurate temperature controls and energy conservation. They are employed wherever thermal separation is required for operational and/or economic reasons between components in installations.These all offer the following special characteristics:

high strength characteristics ensure against bending and compression. Continuous long-term use.
low thermal conductivity
ourstanding size and dimensional stability
excellent workability, available in a wide range
oil and monture resistant
insulation with excedent dielectric characteristics
We can offer following:

we have on stock GLASTHERM HT200 – which is most often used in thicknesses 6, 8, 10, 15, 20, 25 mm
1220x2440 mm, GLASTHERM HT220 - thicknesses 10, 15, 20 mm size
1220x2440 mm and GLASTHERM HT250 - thicknesses 8, 10 mm 1040x2000 mm
other thicknesses and types on request

More Less

Product category: Parts made by mechanical treating, other and machined semi finished products / Pre-cut parts

POLYESTER AND EPOXY MATERIAL

GLASTIC SG-200 A GLASTIC UTR
 

 
GLASTIC SG-200
Glastic Grade SG-200 high-strength & high-temperature laminate offers the same high-performance features and benefits as Glastic´s FHT laminate. In addition, SG-200 offers much higher mechanical strengths than FHT with temperature ratings of up to 210°C. Because of its capabilities, is ideal for a wide variety of product applications requiring high temperature NEMA GPO-1 products. Grade SG-200 is aslo a superior replacement material for epoxy-bonded mica in layer insulation applications.
Available dimensions: 914x1828 mm, 1255x2455 mm.
Thickness: 0,8 až 51 mm.

GLASTIC UTR
Glastic is a fiberglass reinforced termoset polyester material. It is available in sheet form as well as a wide selection of channel, angle, and tube sizes. These materials are the industry standard for flame and arc/track resistant electrical insulation. In addition, the excedent combination of high strength, flame resistance and low smoke generation has given it application in many others areas such as transit and marine where safe, yet economical materials are required.
Available dimensions: 914x1828 mm, 1255x2455 mm
Thickness: 0,8 – 51 mm

Download technical data sheets:  Polyester sheets

More Less

Product category: Parts made by mechanical treating, other and machined semi finished products / Pre-cut parts

MOULDING

Based on customers request we extended production about other processing faciliti by moulding technology of electroinsulation materials, plastics, rubber, banding and slot insulation.

This process leads to outstanding production capacity increase, material utilisation and cost reduciton by parts production in higher volumes.

According to product complexity, material request and series volume, there is individually recommended a usage of the most suitable moulding tool. Consturction and provening of complicated tool design takes about 2 - 3 months. A simple tool production takes several weeks – whose design requires only current tool modification. Common tool life depends on material kind – about 500.000 hoistings.

Moulded parts thickness is standardly to 3 mm, eventually to 5 mm. Dimensional lenght and hole diameter tolerances can be achieved according to material kind and its thickness from + - 0,1 mm.

We wil have a pleasure to give you a response for all requests and make complete price offer.

More Less

Product category: Parts made by mechanical treating, other and machined semi finished products / Pre-cut parts

Manufacturing of electroinsulating materials and metals

CUTTING
 

 
Company LABARA is a specialist in cutting and exact manufacturing of electroinsulating materials and plastics. Dimension saws are being decided on cutting materials. We usually cut materials till thickness 100 mm according to customer requires. The maximum lenght of cut is 3100 mm with accuracy +/- 0,1 mm.
 
CNC MACHINING
 

 
Cutting of electroinsulation materials and plastics is connected with their accurate machining. The company is equipped with 16 CNC machines, milling and lathe machining centres which allows a multi-axis machining. We are able to machine electroinsulation sheets, plastics, compozites, metals and also shapes and moulds.

The machining is possible by these ways:
milling – shapes and moulds with dimension to 1200x2400x650 mm
lathe-turning – Ø 320 mm to lenght 1500 mm and flange to Ø 500 mm

The company is also furnished with 3D measuring device and wide range of additional gauges for ensuring a precise work.

We offer production with a surface finishing – nickeling, zincing, silvering. Each product comes through the final treatment – deburring; in case of electroinsulants – varnishing of cutting edges and surfac

More Less

Product category: Parts made by mechanical treating, other and machined semi finished products / Pre-cut parts

Copper and aluminium wires for winding

RECTANGULAR COPPER, ALUMINIUM WIRES
 
We deliver this types of wires from AB Dahrentrad. Rectangular wires are overlaped by glass, nomex, kapton, mica and varnished. Product range:
DAMID 2
 
rectangular copper wire 2x varnished
 
according to IEC 60317-29
  
Temperature class: 200°C
DAMIDFIBRE
 
rectangular copper wire insulated with:
 
varnish + 1–3x glass yarn and varnish
 
Temperature class: 155°C or 180°C
DAMIDOGLAS
 
rectangular copper wire insulated with:
 
varnish + 1-2 x glass yarn with polyester
 
Temperature class: 155°C
DAFIBRE

rectangular copper wire insulated with:
 
1-3 x glass yarn + varnish
 
Temperature class: 155°C or 180°C

DAMEX (insulated with Nomex 410), DAMIDOMEX (insulated with Nomex 410 and varnish), DAKAP (insulated with Kapton), DAKAP CR (insulated with Kapton CR), DAMIC (insulated with mica), DAFIBRE EPOXY (insulated with glass yarn), DAROGLAS (insulated with glass yarn and polyester).

RECTANGULAR COPPER AND ALUMINIUM WIRES

DAMID AL
 
rectangular aluminium wire insulated with:

2 x varnish according to IEC 60317-29
 
Temperature class: 155°C or 180°C
DAFIBRE AL
 rectangular aluminium wire insulated with:
 
1 – 3 x glass yarn +varnish
  
Temperature class: 155°C or 180°C
DAMIDFIBRE AL
 
rectangular aluminium wire insulated with:
  
varnish + 1-3 x glass yarn + varnish
  
Temperature class: 155°C or 180°C
DAMID PE AL
 
round aluminium wire – 2 x varnished
  
according to IEC 60317-25
  
Temperature class: 200°C
Producers:
AB DAHRENTRAD – Sweden
JSC "PSKOV CABEL PLANT" – Russia
 
BARE RECTANGULAR COPPER WIRES
 

 
We can offer following:
soft
 
F20
semi-hard
 
F25
hard
 
F30
Producer: FABRYKA PRZEWODÓW ENERGETYCZNYCH S.A. – Poland

More Less

About us

Company details

Company LABARA was founded in 1995 as a commercial organization. Its main activity was the purchase and the sale of laminated electroinsulating materials. By progressive development and interest of customers, our company increased its assortment for complete deliveries for the electrotechnical industry.

You can find in our assortment laminated electroinsulating materials – sheets, rods, tubes, slot insulations, technical tapes, adhesive tapes, insulating tubes, mica insulations, copper round and rectangular wires for winding. We also offer conductors and cables for electrical sets, veiling mats for lamination, glass fibres and yarns.

The Company started to offer to customers machining plactics and metals according to their requirements and drawing documentations in 1998. Our company owns proper machine equipment for this activity e. g. CNC saws, CNC milling cutters and lathes. We can offer our customers deliveries of cut sections with accurancy 0,1 mm, sections varnishing, sections sticking, plastic bending. We are able to deliver one cut part just as big series of products in short delivery terms. Our production works with sufficient volume of stocking reserves – about 70 tons.

Commerical activities of our company are worldwide – we operate as on eastern markets so on western European and U.S. LABARA company is a representative of companies as – ELECTROIZOLIT Choťkovo, FREUDENBERG, AB DAHRENTRAD, STEKLOVOLOKNO Polotsk, GOMELCABLE etc. We also buy materials from further foreigns and home producers. We consult and use their recommendation, their experience to choose materials for our application.

The product quality is guaranteed by the certified system ISO 9001:2001. ČSN EN ISO 9001:2009.We provide complete services and our customer always gets his product in the required quality and delivery term.

More Less