RÁK Antenna Gyártó Kft.

Anna akna 1./B, 7300 Komló

Telephone +36 72 581150
Fax +36 72 486438

Trade fair hall

  • Hall 7, level 1 / E20
 Interactive Plan

Hall map

K 2016 hall map (Hall 7, level 1): stand E20

Fairground map

K 2016 fairground map: Hall 7, level 1

Our range of products

Product categories

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.01  Processing technologies
  • 02.01.010  Parts made by injection moulding

Our products

Product category: Parts made by injection moulding


We can undertake to manufacture and injection moulding plastic parts (max. 500 t locking force). Our machinery is of state-of-the-art technology. They are suitable for injection moulding products weighed from a couple of grams to parts of 1500 g (this equals to a product of cc. 1100 cm2 projected surface).

In case of several component products (steel, plastic, combined) we can undertake manual assembling. We make the templet and the special tools necessary for assembling.

Naturally we are able to make inserts as well (e.g. inserting steel into the injection moulding product). We also have adequate cutting and pressing machines (up to 25 t pressing force) to prepare the component to be inserted. Using our excenter presses we can undertake to manufacture parts from brass, bronze and steel ribbons and to machine steel parts up to 20 mm diameter.

Since we are able to carry out all services within the company we can immediately deal with problems arising from quality and transport and can reduce them to almost zero. All this is done at highly competitive prices.

More Less

Product category: Parts made by injection moulding


Painting is carried out in a closed system, in a continuously clean area. Due to the design of the painting plant unlimited layers of paint can be applied on the parts without having to interrupt continuous paining even in a wet-wet system.

In case of plastic parts (with the exception of coating ABS base material) it is necessary to apply priming paint. Colour will be the following layer. The third or the fourth layer of varnish will protect the coating from the harmful effects of strong sunlight, chemicals and the effects of mechanical usage. Such demand has also risen in the market to apply 6-8 layers of varnish onto the surface of the part to achieve a special aesthetic effect, e.g. onto the internal decorative parts of luxury cars. In order to avoid possible damages within technology and to achieve a more productive process transportation of parts is carried out on a lower conveyor line. Even layer thickness of paint and constant colour fidelity can be ensured by applying the paint using automatic spraying technology. During spraying unutilized paint mist is captured and cleared away from the spraying area using water curtain running underneath, at the back and on the sides, ensuring the cleanness of the air in the spraying area, the unpolluted surface of the parts and the perfect quality.

Our drying equipment used for drying the layers of paint is suitable for drying even at an object temperature of 125°C. We can use any kind of painting systems. We can use painting systems of air-drying, drying at 60, 80, 90, 100, 110, 125°C, ensuring the formation of a paint layer of the perfect hardness.

More Less

Product category: Parts made by injection moulding


Inserting metal inserts.
Instead of gluing two plastic parts together we join them using ultrasonic welding and we also insert steel bolts into plastic which is also more durable than gluing.
E.g. the back door handle of Suzuki Ignis is fastened to the back door by 4 pc of steel bolts. The 4 pieces of steel bolts are heated by ultrasonic vibration for 1 or 2 seconds and by melting the plastic it melts into the plastic after which the plastic will stiffen resulting in safe jointing. Using a technology of 20 KHz we are able to weld a wide scale of surface sizes.

More Less

About us

Company details

Our main scope of activity is the injection moulding, painting and varnishing of plastic parts. The acronym RÁK originates from the words Rajnai Árpád Komló which is also the trademark of our company. In 1997 our main scope of activity was the production of auto aerials. That is why we became RÁK ANTENNA GYÁRTÓ KFT. (RÁK AERIAL MANUFACTURING Ltd.)

The original entrepreneurship was founded by Árpád Rajnai in 1968 as a private entrepreneurship.
We have been manufacturing car equipment since 1980 and in 1997 we transformed into the form of a Limited Partnership as a successor.

We work with 129 people on 5135 m2.
Among others we have plastic injection moulding, painting, pressing, machining and tool maintenance departments.

We have been a suppler to the automotive industry since 1992.

Our products can be found in Suzuki,
Opel and Porsche cars, car accessory shops and also in the fields of entertainment and at the sites of Vízi public utility services.

Since 1992 we have won the prize ?The Supplier of the Year? three times and were awarded the "Kaisen" prize once for our extraordinary cost reducing activities at Magyar Suzuki Zrt.

We have continuously been extending our machinery, developing our technology, purchasing and constructing buildings and training our colleagues.

Funding from the European Union subsidy we established our new painting plant and purchased the 1600 gram, 500 t injection moulding machine in 2008.

More Less