MP3 S.R.L.

Via Castelfranco, 52 , 40053 Valsamoggia Frazione Bazzano
Italy

Telephone +39 051 6715811
Fax +39 051 6715940
info@ilpa-mp3.com

Trade fair hall

  • Hall 8a / D20
 Interactive Plan

Hall map

K 2016 hall map (Hall 8a): stand D20

Fairground map

K 2016 fairground map: Hall 8a

Our range of products

Product categories

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.01  Processing technologies
  • 02.01.002  Products made by extrusion

Products made by extrusion

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.03  Supplying
  • 02.03.009  Plastics products and parts for agriculture

Plastics products and parts for agriculture

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.03  Supplying
  • 02.03.014  Plastics products and parts for food processing industry

Plastics products and parts for food processing industry

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.04  Product groups
  • 02.04.001  Semi finished products
  • 02.04.001.01  Semi finished products of acryl-nitrile-butadiene (ABS)

Semi finished products of acryl-nitrile-butadiene (ABS)

Our products

Product category: Products made by extrusion

MP STIR

It is obtained through an extrusion process of one or more layers of SHOCK-PROOF POLYSTYRENE (HIPS) with variable mechanical properties according to the customer’s requirements. It is extruded in a vast range of colours, one- or two-colour, glossy, semi-glossy and matt, smooth and in different embossing grains. On request, it may come with UV protection treatment, which slows down ageing and colour change. On request, it is manufactured in compliance with the requirements of DIRECTIVE 2002/72/EC “Plastic materials and articles intended to come into contact with food” and its amendments, accompanied by the relative declaration of suitability.

Standard production of these sheets is in WIDTHS ranging between 400mm and 2400mm, but non-standard widths can be requested from the Research and Development laboratory that continuously works with a view to provide 100% customer satisfaction.

The THICKNESS may vary between 0.7mm and 9 mm, though generally our customers prefer a thickness between 2.2mm and 8mm.

These sheets are available in any colour, which is tested in our laboratories based on the customers' requests. It is not available in the Transparent version.

It can be made in 5 different FINISHES: Glossy, Matt, GB Embossed, GD Embossed and GE Embossed.

More Less

Product category: Products made by extrusion

LAC 500

It is obtained through an extrusion process of ABS (copolymer of STYRENE, BUTADIENE and ACRYLONITRILE). It is characterised by average mechanical strength, high rigidity and good physical properties. It is extruded in sheets in a vast range of colours, glossy or matt, smooth and in different embossing grains. On request, it may come with UV protection treatment, which slows down ageing and colour change. On request, it is manufactured in compliance with the requirements of DIRECTIVE 2002/72/EC “Plastic materials and articles intended to come into contact with food” and its amendments, accompanied by the relative declaration of suitability.

Standard production of these sheets is in WIDTHS ranging between 400mm and 2400mm, but non-standard widths can be requested from the Research and Development laboratory that continuously works with a view to provide 100% customer satisfaction.

The THICKNESS may vary between 0.7mm and 9 mm, though generally our customers prefer a thickness between 2.2mm and 8mm.

These sheets are available in any colour, which is tested in our laboratories based on the customers' requests. It is not available in the Transparent version.

It can be made in 5 different FINISHES: Natural, Matt, GB Embossed, GD Embossed and GE Embossed

More Less

Product category: Products made by extrusion

ACRYLAC PX 500

It is obtained through an extrusion process of ABS layers (copolymer of ACRYLONITRILE, BUTADIENE and STYRENE) and PMMA (polymer of METHYL METHACRYLATE). It is characterised by medium mechanical strength, high rigidity and good physical properties. The PMMA layer gives the product an excellent appearance, high resistance to abrasions and protection against UV rays, thereby slowing down ageing and colour change. It is extruded in sheets in a vast range of colours with a smooth surface and in different embossing grains. Standard production of these sheets is in WIDTHS ranging between 400mm and 2400mm, but non-standard widths can be requested from the Research and Development laboratory that continuously works with a view to provide 100% customer satisfaction.

The THICKNESS may vary between 0.7mm and 9 mm, though generally our customers prefer a thickness between 2.2mm and 8mm.

These sheets are available in any colour, which is tested in our laboratories based on the customers' requests. They are not available in the Transparent version.

They can be made in 5 different FINISHES: Glossy, Matt, GB Embossed, GD Embossed and GE Embossed

More Less

About us

Company details

The decision to focalize our development towards strategic sectors of the international markets, such as automotive, industrial packaging, food packaging, has led MP3 to become one of Europe market leader.

With over Eur100 million invested since 1998, our strong propensity to invest has permitted us to continuously improve quality, increase our production capacity and diversify our offering to enter new markets with high-end products.

In the next three years MP3 will continue to consolidate its market share across Europe and Worldwide. Strong technological skills combined with inexhaustible focus for innovation allows us to satisfy most requirements of our market.

More Less

Company data

Sales volume

20 - 100 Mill. US $

Export content

max. 75%

Number of employees

101 - 500

Foundation

1978

Target groups
  • Plastic product manufacturing
  • Packaging / distribution
  • Vehicle construction / aerospace
  • Construction / building and living
  • Agriculture

Company information as a PDF file