aboni GmbH für Mess- und Automatisierungstechnik

Friedrich-Ebert-Str. 27 , 14548 Schwielowsee
Germany

Telephone +49 700 22664366
Fax +49 700 22664329
info@aboni.de

This company is co-exhibitor of
Richard Hess MBV GmbH

Trade fair hall

  • Hall 11 / G42
 Interactive Plan

Hall map

K 2016 hall map (Hall 11): stand G42

Fairground map

K 2016 fairground map: Hall 11

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.09  Measuring and test equipment
  • 03.09.008  Measuring equipment for moisture content

Measuring equipment for moisture content

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.09  Measuring and test equipment
  • 03.09.010  Precision weighing equipment

Precision weighing equipment

Our products

Product category: Measuring equipment for moisture content

Service

We care about your HydroTracer!

We provide program updates, reagent, spares and take care of the calibration as part of your test equipment monitoring.

Calibration with Test Report
Wherever measuring devices are used in quality-related areas, the regular check of these instruments is required.

For the calibration, return the unit in its original packaging to us. The calibration process involves checking all moving parts, sensors, seals and filters, and cleaning and leak testing of the reactor.

The calibration is based on a method described in ISO 15512 PLASTICS – is described DETERMINATION OF MOISTURE CONTENT. A defined amount of a calibration salt is heated in a closed reactor to 175 ° C, whereby a complete evaporation of its crystallisation water is ensured.

The average results of these tests must be within a tolerance range.

The permitted values are:

0.1 mg in a range of 0 mg to 10 mg of water,
0.2 mg in a range of 10.1 and 20 mg of water and
0.3 mg in a range of 20.1 and 30 mg of water.

The absolute error of 0.1 mg water is equivalent to a relative error 0.001% = 10 ppm, if the sample weight is 10 g.

The absolute error of 0.1 mg water is equivalent to a relative error 0.0005% = 5 ppm, if the sample weight is 20 g.

The recommended period until the next calibration is

1 year under constant use,
2 years with regular use,
2-3 years of occasional use.

More Less

Product category: Measuring equipment for moisture content

HydroTracer – water content determination in solids

The HydroTracer is a highly accurate moisture analyser, which measures low water contents in solids. It uses a chemical determination of the actual water mass.

The advantages of the patented process:
 

A chemical measurement enables a specific determination of water. Other volatile substances are not detected.
Dried plastics can be measured accurately at lowest residual moisture level.
Illustrated instructions on the screen explain the handling, so even non-specialist operators can use the device.
The HydroTracer can be used within the production facilities due to the compact design and the easy operation.

The precision of the method combined with high sample weights allows the determination of very low water contents with an accuracy of a few ppm. A wide range of materials as granules, films and powders can be tested. The device has been developed for the measurement of water content in granules of technical thermoplastics. A calibration before the measurement is not necessary. The device combines robustness with low weight. Due to these properties and the compact design the HydroTracer is a perfect device for mobile use as plant commissioning etc.

The operation - it's that easy!

More Less

About us

Company details

We are specialized in manufacturing of instruments determining the residual water content in solids. With more than 20 years of experience in the field of moisture measurement. All specific components are internally developed and produced according our own designs by selected suppliers. The final assembly, initial calibration and commissioning of all products is made at our location in Schwielowsee, situated 30 km south-west of Berlin.

More Less