Masterfoam GmbH

Gutenbergstr. 19 , 48268 Greven
Germany

Telephone +49 2571 8797-417
info@masterfoam.de

Trade fair hall

  • Hall 7a / B26-02
 Interactive Plan

Hall map

K 2016 hall map (Hall 7a): stand B26-02

Fairground map

K 2016 fairground map: Hall 7a

Our range of products

Product categories

  • 01  Raw materials, auxiliaries
  • 01.03  Resins and compounds
  • 01.03.044  Synthetic foams

Synthetic foams

  • 01  Raw materials, auxiliaries
  • 01.04  Foams and intermediates
  • 01.04.002  Ethylene/vinyl acetate foams (EVA)

Ethylene/vinyl acetate foams (EVA)

  • 01  Raw materials, auxiliaries
  • 01.04  Foams and intermediates
  • 01.04.008  Polyethylene foams (PE)

Polyethylene foams (PE)

  • 01  Raw materials, auxiliaries
  • 01.04  Foams and intermediates
  • 01.04.026  Closed cell foam rubber

Closed cell foam rubber

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.01  Processing technologies
  • 02.01.005  Parts made by laminating

Parts made by laminating

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.01  Processing technologies
  • 02.01.009  Parts made by foaming

Parts made by foaming

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.03  Supplying
  • 02.03.002  Plastics products and parts for automotive

Plastics products and parts for automotive

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.04  Product groups
  • 02.04.001  Semi finished products
  • 02.04.001.05  Semi finished products of polyethylene (PE)

Semi finished products of polyethylene (PE)

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.04  Product groups
  • 02.04.001  Semi finished products
  • 02.04.001.10  Semi finished products of polyurethane (PUR)

Semi finished products of polyurethane (PUR)

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.04  Product groups
  • 02.04.001  Semi finished products
  • 02.04.001.15  other and machined semi finished products / Pre-cut parts

other and machined semi finished products / Pre-cut parts

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.05  Products
  • 02.05.011  Sealings/Sealrings

Sealings/Sealrings

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.05  Products
  • 02.05.056  Foam products

Foam products

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.05  Products
  • 02.05.065  Pressed parts in accordance with sample, drawing or customer's tools

Pressed parts in accordance with sample, drawing or customer's tools

Our products

Product category: Closed cell foam rubber

Cell rubber

Cell rubber has mainly a closed cell structure. The material is waterproof and gas proof, very elastic and ideally suited to sealing applications.

There are a variety of applications in buildings, ship construction, the automotive production industry, the chemical industry and in the production of electrical devices.  

The selection of the suitable cell rubber type is associated with the right elastomer basis.  Due to its wide range of positive properties EPDM is the most commonly used material.  It is resistant to hot water and steam as well as to  ozone, weather and age.

In case of a requirement for a necessary chemical resistence we offer CR-types, for an application in the area of oil, fuel and diesel we offer NBR-types. 

Cell rubber is produced in blocks and cut into the required original thickness. It is alternativly possible to obtain a rubber without a surface skin. We frequently add a self-adhesive layer.

More Less

Product category: Semi finished products of polyurethane (PUR)

Polyurethane foam on ether basis

Polyurethane foam mainly constists of polyol and isocyanate. Polyurethane-ether foams are mostly used, when there is a requirement for elasticity.  For instance for upholstery, mattrasses but also for vehicle seats.
There are ether-based foams ranging from 16 to far over 160 kg/m3 .The material performs better in wet conditions than polyester-based polyurethane foams.

 

The weight and required strength of the material are needed in order to specify the products. There are further requirements from the area of fire protection and emissions. These materials can be cut and blanked. Foils – or adhesive laminations often complete the product.

More Less

Product category: Semi finished products of polyurethane (PUR)

Polyurethane foam on esther basis

Polyurethane foam mainly constists of polyol and isocyanate. Polyurethane-ether foams are mostly used, when there is a requirement for elasticity. For instance for upholstery, mattrasses but also for vehicle seats.
There are ether-based foams ranging from 16 to far over 160 kg/m3. The material performs better in wet conditions than polyester-based polyurethane foams. The weight and required strength of the material are needed in order to specify the products.
There are further requirements from the area of fire protection and emissions.
These materials can be cut and blanked. Foils – or adhesive laminations often complete the product.

More Less

About us

Company details

Masterfoam stands for 40 years of experience and know-how relating to flexible foam, rubber and felt applications. Flexible foam is an unrivalled versatile material with numerous functional purposes in products, production and/or logistic processes. Masterfoam supplies all sorts of PE and PU foams, rubber, polyester and cotton felts.

Masterfoam is your versatile production partner solving your problems!
Apart from die-cutting in many shapes, our machine tooling includes cutting, milling, drilling, glueing, coating, 3-dimensional cutting, flame bonding and provides us with many opportunities to process flexible materials. We not only laminate and overcoat synthetic foams but also foils, non-woven and woven materials. It is precisely the range of applications which makes our expertise and experience so valuable. Working closely together  and utilising your know-how, we can find the ideal technical solution.

Masterfoam is certified to ISO standards 9001 and ISO TS 16949

More Less