TiMATEC COATING GMBH Maschinen- und Anlagenbau

Dröschitzer Weg 39 , 9220 Velden
Austria

Telephone +43 4274 500200
Fax +43 4274 5002027
office@timatec.at

Trade fair hall

  • Hall 4 / D12
 Interactive Plan

Hall map

K 2016 hall map (Hall 4): stand D12

Fairground map

K 2016 fairground map: Hall 4

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.005  Machinery for foam and reactive resins
  • 03.02.005.01  Preexpanders, foaming machinery for parts and blocks (for EPS, EPP, EPE)
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.005  Machinery for foam and reactive resins
  • 03.02.005.03  Machinery for processing/post processing of foam and parts

Machinery for processing/post processing of foam and parts

Our products

Product category: Preexpanders, foaming machinery for parts and blocks (for EPS, EPP, EPE)

EPS - MOLDING AUTOMAT

The production of these machines takes place in all the required sizes of molding parts. This machines are produced for all of the required sizes of molding parts, as well as EPS packaging industry or also for the production of EPS insulation materials for the building industry. The design of the steam chambers can be designed for all necessary molding tools.

The pre-expanded EPS beads are suctioned from the storage silos into the storage container of the molding machine. Into the molding tools the beads are again expended with steam and these beads are to the respective mold part in the mold. Depending on the size of the packaging parts or insulation parts the cycle times are different.The moldings produced thereby consist of a very high proportion of air and for this reason the parts have a low weight.

More Less

Product category: Preexpanders, foaming machinery for parts and blocks (for EPS, EPP, EPE)

EPS - BLOCK PRESS MACHINES

TIMATEC COATING GMBH has a lot of experience for the correct execution of such block press – machines for the EPS - step sound plates. This is necessary to get the correct quality for the floor impact sound insulation. Another shrinkage after cut the blocks for the sheet is therefore not possible. We are already manufactures these press machines in horizontal and also in vertical execution.

These machines operate in fully automatic operation without an operator. The fork lift driver placed the block sizes on a conveyor system in front to the block press machine. Several blocks can be stored in the waiting position, depending on the conveyor length. Then automatically the further transport of these blocks into the press chamber. The pressing operation are finished, this blocks got automatically out from the press chanber to the subsequently conveyor transport system. The fork lift driver takes this pressed block from the conveyor and takes him into the block storage. On the way back he takes a new block for the pressing process.

More Less

Product category: Preexpanders, foaming machinery for parts and blocks (for EPS, EPP, EPE)

EPS - Coating Line for the production of economic EPS systems for floor heating

Moisture barrier: The laminated PE foil grid prevents moisture absorption and guarantees a good hold of the clamping elements

Insulation without cold transfer: The roller conveyors with overlapping grid foil with self-adhesive strips at the next Roller attached for a solid connection with no cold transfer

Economically: No system can be installed as simple and fast also easily and with minimum wastage

Installation options: The grid equipped PE - foil allows any of the installation of heating pipes and also the distance between the pipes.
A very flexibel system for each situation!

More Less

About us

Company details

TIMATEC COATING GMBH is engaged over 10 years in the EPS industry for the manufacture of special machines. At beginning, the emphasis on the production of EPS - molding machines for the packaging industry. Later also the accessories such as molding tools and other accessories of dust exhaust ventilation systems for recycled EPS – materials as well as mills and silo are included in the delivery program.

Also a very successfully market are the EPS – step sound solution program. Here we delivered before 10 years our first EPS Block press machine in horizontal execution. Meanwhile, more than 10 machines, the most in vertically execution are successfully at the production at our customers. The final product can be found in the EPS step sound solutions production and here in particular the Tracker - system for floor heating or cooling program. Block presses are very successful in use in horizontal and vertical version, up to a block length of 6 m. Our machines operate with fully automated production process without staff.

As a highlight, we have in the EPS – step sound solution program, a complete production line for producing of rolls up to 12 meters roller length for the Tacker system. The EPS-plates we slotted, then we coated this plates with hot melt glue and make the lamination with PP foils - this all in fully automatic production process and with high production speed.

All machines are computer-controlled and equipped with the newest software and with the SIMATIC - S7 – machinery control system.

More Less