PRESSURE BLAST MOBILE FEED SCREW CLEANING
With Maxi-Blast equipment and Maxi-Blast plastic media, cleaning feed screws is a quick one-step process. Eliminate long, tedious hours of hand cleaning. No torching, burning or use of wire wheels. No hazardous fumes. Save time and money with the Maxi-Blast team.
To ensure maximum operator visibility, dust is vacuumed from the cabinet by means of a high efficiency blower located on the clean air side of the dust collector. For easy maintenance, the dust collector is equipped with cotton filter bags with a manual shaker. Media is cleaned by passing through a vibrating screen to trap large contaminants and, simultaneously, through a magnetic separator that filters out ferrous contaminants before being stored for reuse. Reloading of media into the pressure vessel from the storage hopper occurs automatically each time the operator releases the foot pedal depressurizing the vessel.
To provide for smooth flow of the low-density plastic, a 60° cone-shaped pressure vessel and hopper are standard. An adjustable valve controls the feeding of the media into the air stream. These machines feature a mobile clam shell design which enables large heavy feed screws to be cleaned quickly and safely. The rolling design allows the work area to always remain directly in front of the operator, keeping the operation efficient and ergonomically friendly.
Extrusion screw port hole
Safety view window, gloves, fluorescent Lights
Foot-controlled blasting, durable blast hose
Tungsten carbide blast nozzle
1.6 cu. ft. ASME coded pressure vessel
Moisture separator and pressure regulator
Vibrating screen for large contaminants
Air blow-off gun
Starter on systems with 3 phase electricals
Roof entry of blast hose
Dust collector muffler
Clam shell for easy opening