Fleron Automation AB

Ljungvägen , 330 12 Forsheda
Sweden

Telephone +46 370 81160
Fax +46 370 81175
info@fleron.se

Trade fair hall

  • Hall 17 / C80
 Interactive Plan

Hall map

K 2016 hall map (Hall 17): stand C80

Fairground map

K 2016 fairground map: Hall 17

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.03  Post processing machines and downstream equipment
  • 03.03.004  Cutting machines

Our products

Product category: Cutting machines

FA 429 ACS-G

FA 429 ACS-G
is recommend for cutting soft and semi-rigid materials. The machine has very high
power, precision and capacity. Cutting takes place during continuous feeding of
the profile. The machine is in all important parts, including the entire front, manufactured in stainless steel.
FA 429 ACS-G
is a flexible and mobile rotary cutter. ACS-G is our HD (heavy-duty) – model, where the servomotor is speed-reduced with a
planetary gearbox. The knife is directly mounted on the output shaft of the gearbox, which means that the power-loss become
minimal.
The feeding of profile is done between dual driven high-friction belts. Electrical settings for each belt. The position of the lower
belt and the distance between the belts are done with absolute multiturn encoders and is shown on a separate display. The upper
feeding belt has a pneumatic pressure/ lift automatics.
End product conveyor with adjustable belt speed which can be synchronised with the feed speed of the machine.
All settings are easily and logically made in an operators keypad. Quick adjustments of cutting lengths as well as menus for
setting, water spraying system, maintenance, production-data, etc., are always easy to find.
FA 429 ACS-G
is provided with adjustable holders for rapid change guide bushings, dual closed water spraying systems, automatic trimming
during feed-in, etc. The machine can be installed directly in an extruder-line in combination with our loop-control or to be used in
a separate cutting-line.
Prefeeders, decoiling equipment, synchronising equipment and end product conveyors can also be supplied from the Fleron
product-range.

More Less

Product category: Cutting machines

FA 429 ACS

FA 429 ACS
is recommend for cutting soft and semi-rigid materials. The machine has very high precision and capacity. Cutting
takes place during continuous feeding of the profile. The machine is in all important parts, including the entire front,
manufactured in stainless steel.
FA 429 ACS
is a high performing rotary cutter in which the knife is driven by a powerful servomotor. No power-losses in
transmissions etc. The machine is designed for continuous operation in some cases up to more than 3000 cuts/min and
for line-speeds up to 55 m/min as standard. The servo-operation ensures very low maintenance costs as well as a low
noise-level.
The feeding of profile is done between dual driven high-friction belts. Both belts are driven by same transmission and
therefor totally synchronized. The distance between the belts are being set electrically and having a pneumatically
sprung lift-control. All settings are easily and logically made in an operators keypad. Quick adjustments of cutting
lengths as well as menus for setting, water spraying system, maintenance, production-data, etc., are always easy to
find.
FA 429 ACS
is provided with features such as exchangeable rapid change guide bushings, end product conveyor, dual closed water
spraying systems, automatic trimming during feed-in, etc. The machine can be installed directly in an extruder-line in
combination with our loop-control or to be used in a separate cutting-line.
Prefeeders, decoiling equipment, synchronising equipment and end product conveyors can also be supplied from the
Fleron product-range

More Less

Product category: Cutting machines

FA 430 ACS

FA 430 ACS
is recommend for cutting soft and semi-rigid materials. The machine has very high precision and capacity, since cutting
takes place during continuous feeding of the profile. The machine is in all important parts, including the entire front,
manufactured in stainless steel.
FA 430 ACS
is a high performing rotary cutter in which the knife is driven by a powerful servomotor. No power-losses in transmissions
etc. The machine is designed for continuous operation in some cases up to more than 3000 cuts/min and for line-speeds up to
55 m/min as standard. The servo-operation ensures very low maintenance costs as well as a low noise-level.
Double sets of holders with rapid change guide bushings make it possible to switch dimensions very fast. To reach the best
cutting result the machine has a closed water lubrication system with ejectors and filters.
The feeding of profile is done between dual driven high-friction belts. The distance between the belts is set with a handwheel
for each band alternatively one hand-wheel when fixed centre position is required. The upper feeding belt has a
pneumatic lift/- pressure automatics. All settings are easily and logically made in an operators keypad. Quick adjustments of
cutting lengths as well as menus for setting, water spraying system, maintenance, production-data, etc., are always easy to
find.
FA 430 ACS
can be provided for instance with end product conveyor mounted on the machine, automatic trimming when feeding starts,
etc. The machine can be installed directly in an extruder-line or to be used in a separate cutting-line in combination with our
loop-control, prefeeder and decoiling equipment.
Prefeeders, synchronising equipment and end product conveyors can also be supplied from the Fleron product-range.

More Less

About us

Company details

Fleron Automation AB offer standard and specially adapted machines for rotary and punch cutting of hose and profiles, in plastic or rubber. These machines are primarily used in the extrusion industry for cutting products to their finished length in the production line. As well as cutting prefabricated material from coils. Our machines ars used where high demands on length-tolerance and cut surface of the products are being requested.

Fleron Automation AB is a well-renowned company with over 40 years in the industry. Equipments from Fleron are known for their reliability, accuracy and low operating costs. Our R&D-department has a high priority to continuously develope and improve performance of the Fleron machines.

More Less