Grafikontrol S.p.A.

Via Ludovico D'Aragona, 7 , 20132 Milano (MI)
Italy

Telephone +39 02 2100951
Fax +39 02 21009597
sales@grafikontrol.it

Trade fair hall

  • Hall 4 / C57
 Interactive Plan

Hall map

K 2016 hall map (Hall 4): stand C57

Fairground map

K 2016 fairground map: Hall 4

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Integrated automation
  • 03.07.001  Process control technique
  • 03.07.001.02  Machine vision systems
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Integrated automation
  • 03.07.001  Process control technique
  • 03.07.001.03  Software

Software

Our products

Product category: Machine vision systems

MATRIX

STATE OF THE ART WEB VIEWING SYSTEM AND STATISTICAL QUALITY CONTROL

MATRIX is the basic component of the TQC-360° family. Its primary function is to provide the highest image quality and zoom. The 6 Megapixel color digital camera combined with the new generation of high efficiency LED illumination allow snapshots of the running web with dot-sharp images from any printing process and substrate.  The powerful hardware and the new multi-touch operator interface guarantee high performance, fast settings and quick operations. Intuitive graphics, similar to tablets, makes it easy to operate even for beginners.  Its modular design offers the ability to configure the system as the customer wants. MATRIX can act as a simple web viewer or can be expanded with multiple functions and options that transform it into a powerful quality control device. When fully equipped, the MATRIX enables operators to detect the most common print defects, even when not visible to the human eye, and to verify the printing consistency.

More Less

Product category: Machine vision systems

LYNEX

100% PRINT INSPECTION. THE GUARANTEE FOR TOTAL QUALITY CONTROL

In roll-to-roll packaging printing the demand for defect free product and tight regulations obligate printers to equip their presses with systems that can guarantee a total quality control. This avoids embarrassing situations with your customers that can result in costly reprints or monetary credits. LYNEX is a 100% print inspection developed by Grafikontrol to assure the total quality control during the printing process. The continuous inspection of the entire print repeat, with programmable sensitivities, allows the automatic detection of all print or substrate defects and a real time evaluation of the production. The immediate warning, when a flaw is detected, guarantees the elimination of defective material which optimizes your process and avoids claims. The modular architecture, combined with powerful hardware and dedicated algorithms for image processing, make the LYNEX a flexible and easy to use instrument for inspection on gravure, flexo and offset presses. It is possible to set quality standards based on customer needs and specifications. LYNEX can operate as stand-alone module in multiple processes, as a print or substrate inspection device, or in combination with the MATRIX.

More Less

Product category: Machine vision systems

PROGREX

COMBINATION OF 100% INSPECTION + WEB VIEWING

The inspection of a wide web cannot be done only with scanning or 100% cameras. Press operators need a tool that combines line scan cameras (LYNEX) and area camera (MATRIX) to guarantee total quality control and to fully satisfiy the customer request for complete process control.

• Full integration of the LYNEX 100% inspection, the MATRIX area cameras and other features are all managed by a single operator interface
• Intuitive multi-touch screen gives quick and easy access to all components and functions
• The area camera and the 100% inspection work independently: the full web inspection is not compromised when press operator uses the area camera for viewing fine print details
• The Touch&View function moves the area camera to a desired position simply by touching a point on the print repeat display screen

More Less

Product category: Machine vision systems

PROCHECK

WASTE MANAGEMENT

Innovative system that allows real waste tracking through the entire process, from print to slitting.
• Perfectly identifies each defect and synchronizes its location in the roll
• A dedicated marking system generates a variable code (data MATRIX or bar) which is printed periodically on the web edge. Each code contains the data relative to roll length, roll number and job number
• The system connects to the controls of the slitter to automatically stop at the defect location
• Each roll can be reviewed by the Quality Control department before slitting to accept or reject the defects

More Less

Product category: Machine vision systems

CR33-CR34

COLOR REGISTER CONTROL SYSTEM FOR PACKAGING ROTOGRAVURE PRESSES

The CR33 - CR34 register control systems guarantee the highest accuracy and reduction of waste during all phases of production: make-readies, acceleration, and splices for both mechanical and e-shaft presses.  The superior electronic technologies and dedicated software algorithms guarantee steady register between the colors for the entire press run resulting in maximum operator and press efficiency. CR33 and CR34 can be easily adapted to different printing processes (gravure, flexo or offset).  It can function on all registered printing units or as single control for a downstream station.  The systems are designed to fit on new or existing presses and are adapted for in-line or tandem configuration presses. The fiber optics scanners are specially designed using high sensitivity RGB sensors which automatically adapt the amplification to detect very low contrast colors on any kind of substrate.

More Less

Product category: Machine vision systems

Grafikscan

GRAFIKSCAN 3000 is a system for the 100% inspection of printed web, guaranteeing total control during the printing process by automatically detecting and cataloging all defects in order to provide a real-time analysis of production.
GRAFIKSCAN 2200 is a web viewer with statistical inspection software, it ensures print quality control and minimizes waste with help of dedicated special software: interactive register©, barcode verification, Ä color monitoring.

More Less

Product category: Machine vision systems

CR33-CR34

Color register control systems for packaging rotogravure presses. These systems are designed for stand-alone functioning or integration to the press controls.

More Less

Company news

Date

Topic

Download

Jun 16, 2016

TQC360, A NEW CONCEPT FOR DEFECT-FREE PRODUCTION AND WORKFLOW MANAGEMENT

TQC-360° is the newest modular platform for Grafikontrol’s products. It has been developed to give printers a complete solution for quality assurance. With the TQC-360° concept, Grafikontrol offers a full range of quality control to the printing and converting industry through production, application, and processes and services. Our “all around” approach to the customer combines high performing products and excellent service.
The TQC-360° products integrate into any web application. Customers benefit from the modular design which allows them to start with the features they need and upgrade at any time.
The components that make up the TQC-360° line can satisfy any customer need. They can operate separately or together through a single operator interface if desired. Tailor made solutions can be designed to fit non-standard applications

More Less

About us

Company details

Since 1969 Grafikontrol has been world wide leader in designing, producing and installing control and inspection systems for the graphic industry thanks to its experience in rotogravure, flexo and web-offset printing presses, thanks to the fulfilment of different needs expressed by customers in each continent and thanks specially to the passion for quality that has led us to reach the highest standards.

The great experience in the different printing sectors and the continuous cooperation with world wide manufacturers and printers lead us to supply reliable and quality products, able to drastically reduce wastes and press downtimes.

This defect-free production also thank to TQC-360°, the newest modular platform for Grafikontrol’s products. It has been developed to give printers a complete solution for quality assurance. With the TQC-360° concept, Grafikontrol offers a full range of quality control to the printing and converting industry through production, application, and processes and services. Our “all around” approach to the customer combines high performing products and excellent service.

The TQC-360° products integrate into any web application. Customers benefit from the modular design which allows them to start with the features they need and upgrade at any time.

The components that make up the TQC-360° line can satisfy any customer need. They can operate separately or together through a single operator interface if desired. Tailor made solutions can be designed to fit non-standard applications.

More Less