Schubert & Salzer Control Systems GmbH

Postfach 100907 , 85009 Ingolstadt
Bunsenstr. 38 , 85053 Ingolstadt
Germany

Telephone +49 841 9654-0
Fax +49 841 9654-590
info.cs@schubert-salzer.com

Trade fair hall

  • Hall 11 / C67
 Interactive Plan

Hall map

K 2016 hall map (Hall 11): stand C67

Fairground map

K 2016 fairground map: Hall 11

Our products

Product category: Valves

Angle seat motor valve

Angle seat motor valve - Type 7210
size DN 8 - DN 50
pressure PN 40
Motor valve for on/off and control operation with neutral and aggressive media. Ideal alternative to pneumatic valves if compressed air provision is complicated.

More Less

Product category: Valves

Sliding gate control valve

Sliding gate control valve - Type 8043
product line GS3
(reinforced version)
size DN 15 - DN 250
pressure PN 10/40, ANSI #150, #300
The sliding gate principle only requires low actuator thrusts. Therefore, piston actuators can be used although the performance is somewhat reduced in this case. A highly compact unit can be achieved by combining this with a specially developed positioner (top-mounted).

More Less

Product category: Valves

Sliding gate stop valve

Sliding gate stop valve - Type 8040
product line GS3
(reinforced version)
size DN15-DN200
pressure PN16/40
ANSI #150, #300
Universally applicable stop valve for neutral and aggressive media in the chemicals, process engineering and plant construction industries. The sliding gate principle means this valve only requires a very short stroke, and therefore achieves extremely short switching times and a high switching power.

More Less

Product category: Valves

3/2-Way Motor Control Valve

3/2-Way Motor Control Valve - Type 7382
Motor valve for on/off and control operation with neutral and aggressive media.

Ideal alternative to pneumatic valves if compressed air provision is complicated.

More Less

Product category: Valves

Schubert & Salzer Control Systems Sliding gate control valve

Sliding gate control valve - Type 8021
with integrated positioner
product line GS3
(reinforced version)
size DN 15 - DN 250
pressure PN 10/40, PN100,
ANSI #150, #300, #600
This control valve is used in control circuits for neutral and aggressive media in the chemicals, process engineering and plant construction industries. Positioners (pneumatic or electro-pneumatic) are used for precise control. The valve is equipped with an integrated positioner (top-mounted) as standard.

More Less

Product category: Valves

Schubert & Salzer Control Systems Angle seat valve

Angle seat valve - Type 7010
size DN 8 - DN 80
Pneumatically operated stop valve for high switching powers. Also suitable for aggressive media in stainless steel version. The angle seat design offers a high flow rate. The angle seat valve is now available as version for low temperatures.

More Less

Company news

Date

Topic

Download

Jul 8, 2016

Universal Electric Motor Actuator for Lifting Valves

Schubert & Salzer has developed its own lift drive for the sliding gate valves, seat valves and 3-way valves. With its actuating power of 800 N, this extremely compact 2032 electric motor actuator is optimised for excellent actuation precision. With a standard dead band setting of only ± 0.6% of the entire stroke, this motor actuator achieves an exceptional repeat accuracy of up to ± 0.3%.

It is offered in two versions: an open/closed version and as a regulating drive version. Furthermore, it also offers safety functions that can be individually defined. For this purpose, the monitoring of the lifting force, the target value, the temperature of the electronics, etc. are integrated in the drive. For diagnostic purposes, the motor and overall operating period as well as the temperature and lifting ranges are all recorded. These diagnostic functions can be retrieved directly via the Device Config software. At the same time, this software tool gives users of regulating drives the opportunity to adapt parameters such as the actuating time, characteristic curve, signal range and limit switch positions to the process conditions.

With its outstandingly stable aluminium housing and the metal coupling, this lift drive is also designed for tough operating conditions. Mains connections for 24 V AC/DC and 90-260 V AC are also optionally available.

Safety is the top priority

The 2032 motor actuator has an Ingress Protection rating of IP65 as standard. As a result, it offers complete protection against contact and is not sensitive to dust and water showers.

The electric drive can also be optionally secured against power failures. In order to reset this zero voltage, the condensers store sufficient energy to ensure that the fitting moves into a defined fail-safe position if the supply voltage fails. In contrast to mechanical adjusting spring functions, fittings equipped with this new drive can also be set to a freely-selectable fail-safe position. If the supply voltage fails, e.g. in the water or gas industry, these valves move into the pre-defined position, meaning that processes are not necessarily interrupted. Of course manual operation is also available.

Bluetooth module for simplified configuration and communication

In order to ensure simple connection to its control valves, Schubert & Salzer Control Systems has developed a Bluetooth module which is available as an option in the 2032 lift drive. When using the Bluetooth module, the Device Config V7 configuration software establishes a wireless connection with a range of approx. 25 m of this motor valve drive.

This represents an ideal solution for the configuration and monitoring of control valves in plants which are difficult to access, on hot pipelines and other hazardous areas or restricted locations.

Drive combined with sliding gate valves

With sliding gate valves, the new 2032 motor actuator forms a perfectly harmonised system and opens up a wide range of applications. Diverse material options right through to special materials allow this valve combination to be used in the chemical, petrochemical, textile and pharmaceutical industries, as well as in the food and drink engineering sector. It can also be used in steelworks, the ship building industry as well as many more segments. Sliding gate valves have proven to be particularly suitable in vapour applications, for coolants, condensates, acids, alkalines and thermal oil as well as for various gases (including oxygen), cleaning fluids, demineralised water, etc.

Drive for seat valves and 3-way valves

The new lift drive is also suitable for seat valves and is an extremely resilient all-rounder in the field of valve engineering. The compact nature of the new drive is further emphasised by the combination with compact angled seat valves and the required installation space is kept to an absolute minimum.

In combination with the 3-way control valves from Schubert & Salzer Control Systems, the control functions for the mixing and division of neutral or even aggressive media become economical and easy to solve.

More Less

About us

Company details

Schubert & Salzer Control Systems GmbH is a medium-sized company in the Schubert & Salzer Group with its headquarters in Ingolstadt. Our core business lies in developing and selling innovative solutions in control technology for liquid and gaseous media flows.

Our subsidiaries in Belgium, France, India, the UK and the USA as well as more than 40 international partners offer you and your customers quality products from Schubert & Salzer with the "Made in Germany" cachet, worldwide.

More Less

Company data

Number of employees

101 - 500

Foundation

1991

Area of business

Machinery and equipment for the plastics and rubber industries

Target groups
  • Plastic product manufacturing
  • Chemical industry
  • Machinery construction

Company information as a PDF file