SBS POLYCHEM PRIVATE LIMITED

Shriji Kripa,Behind Bank of Baroda, Station Road , 392001 Bharuch
India

Telephone +91 2642 245614
Fax +91 2642 245614
info@sbspolychem.com

This company is main exhibitor of

Trade fair hall

  • Hall 7, level 2 / B17
 Interactive Plan

Hall map

K 2016 hall map (Hall 7, level 2): stand B17

Fairground map

K 2016 fairground map: Hall 7, level 2

Our range of products

Product categories

  • 01  Raw materials, auxiliaries
  • 01.02  Thermoplastic elastomers
  • 01.02.010  Olefin based thermoplastic elastomer, TPO
  • 01  Raw materials, auxiliaries
  • 01.10  Additives
  • 01.10.102  Impact modifiers

Our products

Product category: Olefin based thermoplastic elastomer, TPO, Impact modifiers

WOVENSACK

WOVEN FABRIC & JUMBO BAGS (FIBC)

POLYAID+ S: FOR WHITE FABRICS                    POLYAID+ N: FOR COLOR & NATURAL FABRICS

POLYAID ACTS AS A MODIFIER, PROCESSING AID AND EXCELLENT BONDING AGENT

Characteristics

01  outstanding mechanical properties

Increases elongation without reducing tensile strength.

Increases drop test properties.

Substantial Down gauging Potential.

Reducing the Raw Material, distribution and production Costs.

Aesthetic Packaging Appearance.

Outstanding Packaging Integrity.

02  outstanding processing performance

Excellent dispersion

Increases output, gloss, weaving quality & filler dosage.

Reduces breakage, water carryover, bottom seal failure and eliminates slippage problem.

Increase packaging line productivity.

Introduction

Polyaid has its own product enhancing technology. Its differentiated and outstanding properties compared with other modifiers due to its unique characteristics such as uniform polymeric distribution resulting in low temperature processing and excellent bonding properties.

Polyaid exhibit outstanding mechanical, heat seal and optical properties.

 

More Less

Product category: Olefin based thermoplastic elastomer, TPO, Impact modifiers

BLOWN FILM

BLOWN FILM & LAMINATION FILMS

POLYAID+ BW: FOR WHITE FILMS                    POLYAID+ BN: FOR COLOR & NATURAL FILMS

POLYAID ACTS AS A MODIFIER, PROCESSING AID AND EXCELLENT BONDING AGENT

Characteristics

01                 outstanding mechanical properties

Increases impact strength, Gloss, better stiffness.

Increases processability of low MFI Polymers.

Substantial Down gauging Potential.

Reducing the Raw Material, distribution and production Costs.

02  outstanding processing performance

Excellent dispersion

Lowers melt pressure, die build up.

Increases sealing properties.

Eliminates shark skin effects & Gels.

Introduction

Polyaid has its own product enhancing technology. Its differentiated and outstanding properties compared with other modifiers due to its unique characteristics such as uniform polymeric distribution resulting in low temperature processing and excellent bonding properties.

Polyaid exhibit outstanding mechanical, heat seal and optical properties, and can be used with higher recycle polymer & filler m.b for polymeric stability which results in better processing and productivity fulfilling requirements related to their electrical, rheological and mechanical properties.  

DOSAGE: 4% TO 15 % OF POLYAID IS TO BE ADDED KEEPING THE USUAL FORMULATIONS UNCHANGED.

More Less

Product category: Olefin based thermoplastic elastomer, TPO, Impact modifiers

PVC PANELS, PROFILES & PIPES

PVC PANELS, PROFILES & PIPES

POLYAID+ C

POLYAID ACTS AS A MODIFIER, PROCESSING AID AND EXCELLENT BONDING AGENT

Characteristics

01                 outstanding mechanical properties

Increases tensile strength, Gloss.

Increases elongation and production

Substantial Down gauging Potential.

Reducing the Raw Material, distribution and production Costs.

02  outstanding processing performance

Excellent dispersion & Stability

Increases recycle & filler dosage.

Decreases Vertical Load.

Introduction

Polyaid has its own product enhancing technology. Its differentiated and outstanding properties compared with other modifiers due to its unique characteristics such as uniform polymeric distribution resulting in low temperature processing and excellent bonding properties. It improves impact toughness and low temperature permofmance of window profile pipe and injection products.

Polyaid exhibit outstanding mechanical and optical properties, and can be used to improve insulation and aging resistance properties.

DOSAGE: 2% TO 15 % OF POLYAID IS TO BE ADDED KEEPING THE USUAL FORMULATIONS UNCHANGED.

More Less

Product category: Olefin based thermoplastic elastomer, TPO

Jumbo Bags

Benefits

In higher denier the flow of the material will be consistent.
In tapeline and looms carbon formation will be eliminated due to consistent flow.
Elongation will be better.
Water carryover can be controlled.
No variation in tape width.
There will be less cotton formation in cril stand, warp eyelets and compensator wire, also cleaning time will be reduced in looms.
Powder formation reduces in running shuttle. Increases whiteness and shining of the fabric. Fabric shrinkage will be reduced.
In lamination bonding will be excellent.
With addition of 2% to 4 % of polyaid by replacing PP will reduce the cost.
In higher denier polyaid will make the film and tape more bright and white.

Dosage :

2 % to 4 % Polyaid is to be added keeping the usual formulation unchanged.

Polyaid-JN :

Polyaid-J and Polyaid-JN is a compound to maintain the UV retention. In addition of Polyaid-JN, the dosage of white colour masterbatch can be reduced and the process in the tapeline & looms become smooth. It works as a modifier, processing aid and maintain the mechanical Properties.

More Less

Product category: Olefin based thermoplastic elastomer, TPO

HDPE and PP Pipe

Benefits

Caco3 can be increased.
Better elongation.
Better strength.
Good homogeneity.
Excellent gloss ,brightness and finished surface. 
Variations of shrinkage will be controlled.
Thickness variation of the pipe can be controlled.
Dosage of recycle material can be increased.
Increaes breaking strength.
Increases impact strength.
Excellent dispersion of all raw materials.
Increases the intensity of colour.
Consistent flow of the raw material.

Dosage :

5% to 20% of poly aid is to be added keeping the usual formulation unchanged.

More Less

About us

Company details

It is a great pleasure to inform you that we are in Thermoplastic Compounding industry since 1998.

SBS POLYCHEM PVT.LTD., india has been manufacturing and developing wide range of thermoplastic compounds for various plastic industries.We have developed a wide range of additive masterbatches, modifiers and compounds to suit the latest requirements of plastic industries.

The company has been working with new generation polymers and additives to develop POLYAID PLUS for a wide variety of applications.

Company has specialized experience in wide range of PP/PE Compounding with brand name of POLYAID PLUS. SBS POLYCHEM PVT. LTD make different type of Additives masterbatch and Modifier which improves the quality of product without increasing cost. POLYAID PLUS formulates most of its products through very advanced chemical mapping software to achieve the desired Rheological, Mechanical and Electrical Properties. The material thus produced is assured to achieve uniform dispersion of additives and chemicals to facilitate decreased machine load and increased output during production.

More Less

Company information as a PDF file