Friul Filiere S.p.A.

Via Polvaries, 21 , 33030 Buia (UD)
Italy

Telephone +39 0432 961811
Fax +39 0432 962591
friulfiliere@friulfiliere.it

Trade fair hall

  • Hall 16 / D72
 Interactive Plan

Hall map

K 2016 hall map (Hall 16): stand D72

Fairground map

K 2016 fairground map: Hall 16

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.01  Extruders
  • 03.02.001.01.01  Single screw extruders

Single screw extruders

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.01  Extruders
  • 03.02.001.01.02  Twin screw extruders
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.02  Extrusion lines
  • 03.02.001.02.05  Extrusion lines for pipes and profiles

Extrusion lines for pipes and profiles

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.02  Extrusion lines
  • 03.02.001.02.10  Extrusion lines for composites

Extrusion lines for composites

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.04  Machinery and plant for finishing, decorating, printing and marking
  • 03.04.001  Printing equipment for plastic and rubber products

Printing equipment for plastic and rubber products

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.06  Moulds and dies
  • 03.06.003  Extrusion dies

Extrusion dies

Our products

Product category: Twin screw extruders

OMEGA S SINGLE SCREW EXTRUDERS

These co-extruders are available in the following versions: 45, 60, 80, 100, 120, 160 mm.Each model includes different versions based on the length and diameter ratio:25D28d WITH DEGASSING SYSTEM30DEach model includes different versions on the basis of speed:slowfastspecialIn these extruders, the standard version is equipped with universal screw but it can also be replaced with a dedicated screw according to the different thermoplastic materials used – PVC, PE, PS, PP, PMMA, TPE, ABS. These extruders are also predisposed to insert Pressure and temperature Transducers.

More Less

Product category: Twin screw extruders

CONICAL TWIN SCREW EXTRUDERS

These extruders are specially designed for the use of dry blend in rigid PVC processing. They are particularly suitable for high-speed extrusion of profiles at a high counter-pressure. These twin-screw extruders are available in diameter of 43, 53 and 63. All models have a ratio of L/D = 23 and are equipped with a degassing system. These extruders are also prepared for the insertion of pressure and temperature transducers.

More Less

Product category: Twin screw extruders

OMEGA EVOLUTION LINE

Omega S "EVO" represents the new Downstream generation.This new "concept" covered by European patent, radically reinterprets the concept of extrusion. Single monocoque main frame for Calibrating table, Takeoff, Cutting unit and the cutter dump table. Unique Electrical cabinet, integrated into the structure together with the wiring. Control of all the units with touch screen operator panel. Very fast downstream customization possibility with insertion of additional units such as UV Modules Printing Groups, Punching units, Marking units and more. The structural compactness, the convenience and flexibility, combined with an innovative design, makes the Omega S “EVO” downstream a unique solution in today's panorama.

More Less

Product category: Twin screw extruders

STANDARD DOWNSTREAM

This downstream consists of individual and detachable Units with separate Electric Panels: Calibration table, Haul-off, Cutter, Profiles collection table. These units are available in ranges of different sizes to meet all requirements.

More Less

Product category: Twin screw extruders

PRINTING MACHINE - PAINT-X

PAINT X is a printing machine that uses a rotogravure system, it is designed and meant for a customer who needs to give thermoplastic profiles a wood or marble imitation finish or other similar finishes. The printing process uses acrylic inks dried under a UV lamp or, on request, air dried solvent-based inks.The peculiarity of this process consists in the fact that the thickness of the print is minimised, which means low paint consumption and consequent cost savings.The process can be run with one single printing group, for one-colour printing, or with more groups for multi-colour printing, up to a pentachromic printing system for a realistic appearance; the result is a perfect imitation of wood or any other finish desired.

More Less

Product category: Twin screw extruders

HIGH TECHNOLOGICAL EXTRUSION DIES

Friul Filiere started as a small artisan firm, taking its first steps in the production of toolings for the extrusion of PVC profiles, in 1978.

During all these years this company realized more and more technological extrusion dies and today is a specialist  in designing and producing extrusion dies for high performances and extreme thermoplastic materials, thanks to the great efforts in Research and Develpment.

Dies can be grouped by typology
SINGLE-STRAND identifies a die with a end section allowing the exit of only one profile.
TWIN-STRAND identifies a die with a end section allowing the exit of two profiles, alongside one another or one on top of the other.
MULTI-STRAND identifies a die with a end section allowing the exit of more than two profiles.
CO-EXTRUDER identifies a die that produces a profile combining two or more thermoplastic materials, each single material being fed to the die from two different extruders.
POST CO-EXTRUDER identifies a die that allows the co-extrusion of a different material on a profile soon after calibration but within the same extrusion process.
WITH INSERTS identifies a die that allows the insertion of non-compatible elements such as steel, copper, magnets, glass fibres, etc., during the extrusion stage.

More Less

About us

Company details

Friul Filiere S.p.a. operates in the field of plastic materials at the international level since more than 30 years. Known as the only Italian Company able to supply complete lines and toolings for the extrusion of all thermoplastic materials, accompanies customers throughout the development of personalized projects, from the initial request to the delivery of a “Turnkey Project”: feasibility tests, plans of the project, materials formulation, development of extrusion technology, machines and toolings and final test, are all carried out inside its own modern factory occupying an area of approximately 10,000 sqm. Its long-time experience has generated technical competence and professionalism that are put at the service of research and experimentation, and combined with Italian design to offer a unique product. Among the most important “Turn-key Projects” realized there are PLANTS FOR THE PRODUCTION OF FOAM PVC DOORS, FOAM PS DECORATIVE FRAMES, REINFORCED AND COMPLEX GASKET PROFILES, THERMOPLASTIC LAYER COEXTRUSION OVER FLEXIBLE METAL HOSES, HIGH SPEED DIP TUBING, FFC™ WINDOWS COUNTERFRAME PROFILE, TABLE EDGE PROFILES IN SINGLE OR TWIN EXIT.

More Less