03 Machinery and equipment for the plastics and rubber industries
03.04 Machinery and plant for finishing, decorating, printing and marking
03.04.001 Printing equipment for plastic and rubber products
Printing equipment for plastic and rubber products
03 Machinery and equipment for the plastics and rubber industries
03.05 Welding machines
03.05.002 Heat impulse welding machines
Heat impulse welding machines
Product category: Bag and sack making equipment
MODULA 2000 SV
Automatic bag-making machine MODULA 2000 SV for the production of bottom sealed bags and blocked bags with perforation with max. bag length to mm. 700 when using NO-STOP device. With this solution the machine runs in continuous without stopping for the indexing. Maximum bag length in standard running with pause: mm. 1200.
Servo-Drive automatic bag-making machines for plastic films MODULA 2000 are manufactured in the range SV to satisfy the need to produce bottom sealed bags and tear-off hot blocked bags.
The range of this machine, in addition to the advantages due to the use of the modular welding head, adds that of the stacking bags by pins system that consents to produce at high speed, and to eliminate piling problems, very thin bottom sealed bags.
The produced bags have micro holes situated at 8 mm. from the opened side.
These machines can also be equipped with a large range of film feeding groups composing complete lines for the production of bags in more lanes starting from one big roll.
Main features are:
Brushless motors used for: film feeding speed control; welding head assembly motion control; drive and chariot positioning for moving packs of bags in the indexing table. Electronic Machine Management by an Industrial PC with a Human Machine Interface console utilizing a 19”video colour screen and keyboard. From this HMI, the operator may completely operate; view the production; change recipes, and maintaining the equipment as required. Complete alarming and historical events logging are also provided. In addition maintenance and trouble shooting information are provided for an easy diagnostic. Bags up to 700 mm lenght are produced in a continuous sequence with NO-STOP operation. Bags up to 1200/2000 mm lenght are produced with PAUSE operation. A single modular welding head incorporates a cam drive cold toothed cutting blade and Nickel- Chrome sealing wires suitable for the production of bottom sealed bags and bloc-notes bags with perforation and banana handle. Perfectly stacked bags are made easily by thin cold pins. Cold pins are completely adjustable and may be removed and relocated as required. Packs of bags are made immediately after the welding head and contemporarily to the sealing phase: this assure a perfect bags piling. Automatic indexing table. Can be supplied in two solutions:
STANDARD used for the collection of flat or folded bags in 2, 3 or 4. On request, an extended version is available for collecting bags long up to 3000 mm folded in 4 or 8. WITH AUTOMATIC PUNCHING EQUIPMENT for producing bloc-notes bags with perforation and banana handles in 1, 2, 3, 4, 5, 6 and 7 lanes.
Complete installation for the production of bottom seal pre-cut, rolled-up bags taped with gummed paper.
FILM FEEDING LINES - VERSIONS 1700mm and 2000mm For obtaining multiple tracks of gusseted and non-gusseted films, starting from a single reel
Reel holder group, shaft-less type, with hydraulic lifting.
Motor braking system with multiple dancing roller, with quick feeding film , for the automatic control of the unwinding film tension.
High-precision film guiding system.
Longitudinal film slit-seal devices, with thermo-controlled nickel-chromium blades, suitable to obtain multiple tracks starting from a single mother-reel.
Multi-track motor gusseting unit, with quick film insertion dancing roller.
Motorised film track conveyors with remote control.
Units for the printed film alignment.
AUTOMATIC BAG MAKING MACHINE MODEL “ROLL-FLEX” For the production of rolled up bags and sacks
Main drive with electronically-controlled servo-motors, to adjust the film feeding speed and the synchronised movement of the welding bar
Motor calender to pull the entering film
Multi-sector calender, for a better tension of the tracks; the sectors are controlled by independent motors
Movable carriage for film compensating
Modular welding bar, water-cooled, with nickel-chromium sealing wires and pre-cutting blade with independent control. Possibility to control the micrometric adjustment of the pre-cutting blade through touch-screen according to the type and thickness of the material to be processed
Electronic control of the whole plant by industrial Soft PLC; integrated supervision system operating in Windows XPE; primary drivers connected by Ethernet; secondary drivers connected via Canopen Field Bus.
Possibility to store the parameters of all jobs and recall them whenever necessary.
Electric and electronic cabinet with air conditioning
Antistatic generator with relative ionising bars
Photocell for the printed film processing
AUTOMATIC MULTIPLE WINDER GROUP FOR ROLLED UP BAGS WITH TAPING DEVICE Working synchronised with the bag-making machine
The winding of the bags on rolls can be carried out on 1, 2 or 3 tracks according to the size of the bags to be produced
The group is provided with three winding stations, each one equipped with four revolving grippers
The roll winding, tear-off, taping and unloading phases are carried on simultaneously
The winding spindles are placed on a rotary drum
Industrial Computer, mounted on a movable arm with a 19” colour touch screen video for the viewing of the production cycle, the troubleshooting and the identification of the failures, the alarm signalling, the statistics, etc.
Bag counter by electrostatic discharge
Taping devices equipped with belt for the transport of the cut and moistened tape
Possibility to use tapes having lengths from 30 to 200 mm
Complete installation for the production of bottom sealed bags, garbage bags with perforation and draw-tape closing, rolled-up and taped with gummed paper.
Feeding line for film maximum width mm 1200 or mm 1700
Unwinder station for rolls maximum diameter mm 1000. (On request: mm 1300) Shaft less system with hydraulic lifting of the reel Maximum film width mm 1200 or mm 1700 Motorized braking system with multiple dancing rollers and quick film feeding for automatic tension control during unwinding High-precision, pneumatic film guiding system.
Station to insert the draw-tape
Draw-tape stand for max. roll diameter mm 800; automatic roll braking with small dancing roller for tension control Motorized calendar for film in feed Static charge equipment on film tape Motorized device for punching hole diameter mm. 40 with scraps exhausting Double flap turning device Turning device to insert automatically the draw-tape Longitudinal welding with nickel-chrome wires and with hot air blow system.
Automatic bag-making machine model "R – 3011draw-tape" or "R – 3013 draw tape" to produce bags in LD.PE. – LLD.PE – HD.PE. – Biodegradable – recycled material.
Main machine drive by electronically controlled servo motors, to adjust film feeding speed with welding head motion synchronisation Motorized film infeed calendar Motorized film out-feed calender Movable chariot for film tension compensating Modular welding bar, water cooled, with nickel chrome sealing wires and perforating blade driven by a dedicated servo motor. Micrometric adjustment of the perforation blade, while machine is running, according to the type and film thickness to process Additional reinforce welding on draw-tape Electric and electronic main cabinet with air conditioning Photocell when processing printed film Module with motorized folding triangles between the bag-making machine and the automatic winderstation.
Automatic rewinder for bags-on-roll mod. Roll-Flex Draw-Tape DT -1.
Winding of bags on rolls on 1 or 2 tracks, according to the bags sizes to produce, with four revolging grippers Winding grippers assembled on a rotating drum Useful winding grippers width: mm 420 The roll winding, tear-off, taping and unloading phases are carried on simultaneously Max. rolls diameter: mm. 120/150 Max. roll changes per minute: no. 22 Electronic machine management by an industrial computer composed of a Human-Machine Interface (HMI) console utilizing a 19” video colour touchscreen. By an integrated supervision system operating in Windows XPE, it is possible to operate easily, check the production, change recipes and maintain the equipments as required Primary drives are connected via Ethernet; secondary drives are connected via Canopen Field Bus Possibility to save all production parameters and re-call whenever necessary Bags counting by electrostatic discharge Possibility to tape rolls bags with gummed paper, printed or not printed A dedicated photocell, placed inside the taping unit, allows processing printed paper, having a mark as reference Paper roll widths: from 30 to 200 mm Max. paper rolls diameter: 200 mm Conveyor belt to take bags on rolls out of the rewinder.
Saldoflex and Filippini & Paganini are among the world leaders in the production of high technology bag-making machines and flexographic presses for printing on plastic film, paper, raffia.
We have been designing and directly producing the machines and their components for more than 50 years. This company policy has guaranteed and will continue to guarantee the extreme reliability of our solutions. Our customers are well aware of the attention we pay to them, of the great care in designing and manufacturing even the smallest details of our machinery and of our ability to adapt solutions to their requirements. It’s also thanks to all this that Saldoflex and Filippini & Paganini are present in all countries of the world.