Aigle Macchine S.r.l.

Via Donatello, 8 , 10071 Borgaro Torinese (TO)
Italy

Telephone +39 011 2624382
Fax +39 011 2624348
info@aigle.it

Trade fair hall

  • Hall 4 / D05
 Interactive Plan

Hall map

K 2016 hall map (Hall 4): stand D05

Fairground map

K 2016 fairground map: Hall 4

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.04  Machinery and plant for finishing, decorating, printing and marking
  • 03.04.001  Printing equipment for plastic and rubber products

Printing equipment for plastic and rubber products

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.04  Machinery and plant for finishing, decorating, printing and marking
  • 03.04.003  Embossing equipment

Embossing equipment

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.04  Machinery and plant for finishing, decorating, printing and marking
  • 03.04.004  Laminating plant

Laminating plant

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.04  Machinery and plant for finishing, decorating, printing and marking
  • 03.04.005  Coating plant

Coating plant

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.04  Machinery and plant for finishing, decorating, printing and marking
  • 03.04.006  Flocking plant

Our products

Product category: Flocking plant

AC Flocking Machine

With the AC system it is possible to obtain a higher flocking speed. An AC electric device consisting of a set of special electrodes mounted on an insulated frame is located below each group of flocking hoppers. The AC system is normally used in the field of upholstery fabrics.

More Less

Product category: Flocking plant

Laminating Group - mod. GRA/1

The Laminating Group mod. GRA/1 for wet lamination and dry-coat lamination technology.

It is consisting of:
- Upper unwinding unit with aligning system of the fabric to be laminated with fabric unwinding position with couples of beam-holder self-closing chucks and manual brake.
- Enlarging cylinder.
- Laminating cylinder hard chrome plated and ground. It is mounted on vertical slides, it is provided with micrometric adjustment of the working layer and actuated by two pneumatic cylinders for a quick lifting.
- Laminating cylinder rubber covered and ground.
- Both laminating cylinders are motorized in synchronisation with the rest of the line

Options: laminating cylinder can be heated by diathermic oil or cooled by water according to the technological
needs.

A.C. Motorization and Control Panels mod. QE.

More Less

Product category: Flocking plant

DIRECT COATING

COMBINED COATING HEADS

HIGH TECHNOLOGY MULTIFUNCTION UNITS

The idea behind the engineering and development of coating machines was to obtain the possibility to work
with different coating techniques. The new techniques employed are the result
of a long experience combined with a dedicated research program by AIGLE during
many years spent producing high technology plants.Coating machines are very easy to use
and allow many different processing adjustments; they are very versatile machines with a high production yield.

More Less

Product category: Flocking plant

Forced Air Cooling Unit – mod. AFC

The Forced Air Cooling Unit mod. AFC is placed in a profile flocking line after the vulcanization oven; its function is to lower profile temperature before sanding and glue spraying.

The unit is equipped with an A.C. motorized conveyor belt made with a teflon coated fiberglass net. Conveyor belt speed is controlled either through potentiometer or 0-10V external inlet signal.

Cooling air blown by the air input fan is conveyed to the profile through two sets of channels and is then exhausted. In order to prevent condensation, a special separator is provided on the air duct.

The outer shell is made of two metal sheets containing an insulating and phono-absorbing material.

The unit is equipped with two covers which are opened and closed by pneumatic cylinders.

More Less

Product category: Flocking plant

Brushing Unit – mod. SZ3

The Brushing Unit mod. SZ3 is used to clean profile from sanding residue before glue application, or from flock residue after vulcanization.

It consists of:

A structure on four wheels, allowing to easily move the machine

Three brushes with natural bristles rotating on two rows, opposed to idle cylinders:
1. two for upper profile side
2. one for lower profile side.

Both rows are independently motorized and equipped with motorized pressure adjustment. For proper dust recovery, each brush has a suction hood connected to a suction unit sealed transparent access doors to avoid dust dispersion.

More Less

About us

Company details

AIGLE began its activity in 1958 by producing FLOCKING machines for all applications.
The first ten years were spent in improving and developing the flock technology, particularly for the application in the textile field. In the year 1968, AIGLE started the construction of COATING and LAMINATING equipment considered as a natural extension of the former production.

AIGLE is designing, manufacturing and selling its equipment all over the world; machines are manufactured in a factory, located in Borgaro Torinese.

AIGLE organization is consisting of:
- Engineering department for mechanic, electric, pneumatic, thermic and hydraulic design, fully equipped for the industrial designing with 3D CAD system.
- Production department equipped with modern tool machines and high profile carpentry.
- Electric/electronic department for studying and assistance of the control panels and PLC programming.
- Technical and technological assistance for erecting and commissioning the equipment is considered a crucial part on the selling process of Aigle industrial culture.
AIGLE invests many resources in research and development for updating and increasing the performances of COATING, FLOCKING and LAMINATION plants creating a technical team with good skills for construction as well as engineering complete plants and single equipment.
Results of these efforts are machines and installations that now are allowing our customer to face the challenges that market is presenting.

In more then 50 years of activity Aigle has accumulated a big experience on handling relationships with customers.
AIGLE can offer ready and deeply verified technical solutions to customer with precise and defined exigencies and technical requests; but AIGLE can be also considered a partner for developing new projects for facing with sharp and successful tools the difficult and more and more pretending markets requests.

AIGLE’S MAIN PLANTS LIST:
- PLANTS RUBBER PROFILE EXTRUSION AND FLOCKING FOR RUBBER PROFILE FOR CAR AUTOMOTIVE

- PLANTS FOR THE PRODUCTION OF SYNTETIC LEATHER FOR USE IN UPHOLSTERY, GARMENTS, AUTOMOTIVE

- PLANTS FOR FINISHING FABRICS BY DIRECT AND FOAM COATING & PRINTING (TRADITIONAL AND DIGITAL) FOR USE IN UPHOLSTERY, CURTAINS, GARMENTS, AUTOMOTIVE

- PLANTS FOR PRODUCTION OF ABRASIVE PAPER

- PLANTS FOR FINISHING WALL PAPER, FLOCKING, PVC COATING & EMBOSSING

- PLANTS FOR BACK COATING OF CARPETS AND SYNTHETIC GRASS BY LATEX AND PU

- PLANTS FOR LAMINATING FABRICS BY WET PROCESS, POWDER SCATTERING, HOT MELT AND FLAME

- PLANTS FOR MANUFACTURING AND FINISHING BY THERMO-BONDING NON WOVEN FOR GEOTEXTILE

- PLANTS FOR MANUFACTURING AND FINISHING NON WOVEN FOR HOUSE CLEANING FABRICS

- PLANTS FOR FINISHING BY FLOCK INJECTION MOULDED ABS AND PP FOR AUTOMOTIVE AND TOYS FOR CHILDREN PARTS, BY MANUAL AND ROBOTISED TECHNOLOGY

- PLANTS FOR FINISHING BY PRINTING (UV, PVC, PIGMENTS ETC), FLOCKING & GLITTERING PAPER (CONTINUOS AND IN SHEET FORM) FOR PACKAGING AND DECORATION

More Less