FRIMEC S.r.l.

Via Bortolo Pollini, 33 , 25080 Nuvolento (BS)
Italy

Telephone +39 030 9989711
Fax +39 030 9989704
frimec@frimec.it

Trade fair hall

  • Hall 10 / G52
 Interactive Plan

Hall map

K 2016 hall map (Hall 10): stand G52

Fairground map

K 2016 fairground map: Hall 10

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.08  Ancillary equipment
  • 03.08.002  Heating and cooling technology
  • 03.08.002.01  Heating and cooling units
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.08  Ancillary equipment
  • 03.08.002  Heating and cooling technology
  • 03.08.002.02  Water chillers

Water chillers

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.08  Ancillary equipment
  • 03.08.002  Heating and cooling technology
  • 03.08.002.03  Internal cooling equipment

Internal cooling equipment

Our products

Product category: Heating and cooling units

Industrial refrigeration: MK evo pro MK evo pro FT

Air cooled refrigeration plant units from 11 kW to 395 Kw

The new air cooled refrigeration plant MK Evo Pro units are based on over 40 years of experience in refrigeration and modern technologies, both in terms of design in the use of modern materials.

They are modular units designed to cool industrial water ( water temperature controllers ) or other fluids in factory production lines. For the MK Evo Pro their operation is within a completely closed function, with fluid circulation between the chiller and the MK Evo Pro FT open-loop usage funtion.
Power is from 11 to 395 kW. They provide water at an optimal temperature, adjustable at will and constant usage, ensuring a continuous flow with stable flow and pressure. Elimination of all the problems that usually arise when using open circuit cooling with escaping water, such as of calcification, deposits of microflora (algae) and chemical attack due to the acidity of the water; also eliminating the problem of thermal pollution no longer having to download anything into the drainage system.

Finally, permitting the operation of machinery without any dependence on an external water supply, without fuel and therefore ecologically perfect. All coolers in the standard version of the MK Evo Pro series are designed for outdoor or indoor installation and can operate with ambient temperatures of between -10 C to + 45°C and provide chilled fluids with temperatures ranging from -8°C to + 20°C. On request there are systems for higher and lower temperatures. The air-cooled chillers offer, alongside the production of cold water a continuous stream of warm air leaving the condenser by powerful centrifugal fans, and this properly channeled , can be used as a source of heating in winter and as a heat extractor in the summer. All MKN series chillers are equipped with an internal insulated storage tank, automatic filling filling tank, air vent from the water distribution pipes and a centrifugal pump for delivery use. All groups are made in modular version such as to permit the parallel connection of multiple units of different power capacities to increase the overall power, whilst each preserving complete independence. Cooling units are made with semi-hermetic compressors or screw compressors or magnetic compressors.

More Less

Product category: Heating and cooling units

Industrial Refrigeration: MK evo pro FTE

Air-cooled refrigeration plant units from 440 kW to 2000 kW

The air-cooled mono bloc refrigeration centres ( refrigeration units ) series MK evo pro FTE, with major power capacities of between 440kw and 2000kw are designed for installation in open environments to solve every positional problem and are designed with unchangeable weatherproof structures and watertight cabins to contain electrical equipment. The latter can be managed directly by the process through a remote microprocessor. The MK evo pro FTE centres use primary brand compressors; either semi-hermetic or intermediate screws, for better management of the cooling output, easily accessible and acoustically isolated, utilising an anti vibration system reducing noise to an exceptionally low level.

The start up with reduced current “part winding” is thanks to the low starting points and enables considerable energy savings. The regulation of power, controlled by the microprocessor provides a constant chilled water temperature. The same microprocessor activates the intermediate cyclic automatic sequence control of the various compressors change of use, and of the fans , to react to the varying external temperatures. Each unit is fully assembled and tested at the factory to allow the end user to simply make the water an electricity connections. All groups are made in modular form in order to permit parallel connection of several units with different power capacities to increase overall power, whilst each retaining complete independence. Cooling units are made with semi-hermetic compressors or screw compressors or magnetic compressors.

More Less

Product category: Heating and cooling units

Industrial Refrigeration: MK evo pro FC

Free - cooling refrigeration units from 75 kW to 395 kW

The new cooling refrigeration units central Evo PRO MK FC are the result of over 40 years of experience in refrigeration and modern technologies, both in terms of design in the use of modern materials.
They are designed for outdoor installation in order to use ambient air as an energy source for cooling process water during periods when weather conditions allow an efficient thermal exchange with them.

The micro controller process compares the outside air temperature with the set temperature for use, and controls special automatic valves which govern the passage of water through water-air exchangers rather than through refrigeration circuit.
This solution clearly allows the saving of energy normally necessary for the operation of compressors often for substantial periods, for furnishing the required temperature and with respect to the prevailing climatic conditions on site. Experience gained over the years and the different categories of applications allows us to estimate energy savings of up to 90% compared with traditional consumption.

More Less

Product category: Heating and cooling units

Thermoregulation: VR

Water thermo regulators

For processes that require control of temperatures up to 95 °C water temperature controllers were devised that permit rapid heating through high input of heat, and use an automatic control of temperature with a capacity to adjust the power of the heating.

The temperature is constantly controlled by an appropriate cooling water system.
Regulation of the desired temperature is through two minimum and maximum contacts, the former stops the electric heating and the latter inserts the cooling circuit offsetting increases in temperature due to thermal inertia of the mold and the lamination temperature of the printed materials.

More Less

Product category: Heating and cooling units

Industrial Thermoregulation: VR S - VR PRESS

Pressurized water thermo regulators

The thermoregulator VR Press Series is for processes that require high temperatures, providing the temperature control up to 150 °C.
The temperature is constantly maintained: in fact, an appropriate cooling system is provided by maintaining constant water temperature regulation.
Two electronic minimum and maximum contacts adjust the temperature control: minimum contact interrupts the electrical heating and the maximum the cooling circuit, separate from the circuit process, offsetting the increases in temperature due to thermal inertia of the mould and the plasticization temperature of printed materials.

More Less

About us

Company details

in industrial refrigeration, industrial cooling and industrial chillers in respecting the enviroment

FRIMEC SRL - FRIGOMECCANICA INDUSTRIALE, leader for more than 40 years in industrial refrigeration, is the only comapny able to provide an adequate service/assistance to FRIGOMECCANICA INDUSTRIALE units.

Intensive selection, training and retraining of workers, with commercial partners and to those dedicated to technical assistance for our customers associated with a vast experience allows FRIMEC be at the forefront of design and construction of industrial cooling, industrial chillers and industrial refrigeration.

To demonstrate the high degree of specialization in industrial refrigeration and in construction of industrial cooling, FRIMEC is increasingly called upon to study, design and construction of cooling machines TBM, the so-called Moles used to excavate tunnels for subways and highway tunnels, but especially facilities to provide pressurized water given the high flow and high pressures, which are necessary in this type of plant. FRIMEC boasts the creation of the Metropolitan of Rome, Brescia, Genoa, the Metro Line 5 of Milan, Warsaw and the longest Italian motorway tunnels crossing the line variant of the Bologna-Florence.

More Less