Labtech Engineering Co., Ltd.

Bangpoo Industrial Estate, 818 Moo 4, Soi 14B, Suhkumvit Rd, Praksa, Muang , 10280 Samutprakarn
Thailand

Telephone +66 2 7096959
Fax +66 2 7106488
labtech@labtechengineering.com

Trade fair hall

  • Hall 7, level 1 / C37
 Interactive Plan

Hall map

K 2016 hall map (Hall 7, level 1): stand C37

Fairground map

K 2016 fairground map: Hall 7, level 1

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.001  Mixers
  • 03.01.001.03  Mixers, batch type, for solids
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.002  Two roll mills
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.004  Screening machines, classifiers, dedusting systems for plastic pellets

Screening machines, classifiers, dedusting systems for plastic pellets

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.006  Pelletizers
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.007  Screen changers

Screen changers

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.008  Melt filters

Melt filters

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.009  Compounding lines
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.01  Extruders
  • 03.02.001.01.01  Single screw extruders
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.01  Extruders
  • 03.02.001.01.02  Twin screw extruders
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.02  Extrusion lines
  • 03.02.001.02.01  Extrusion lines for blown film
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.02  Extrusion lines
  • 03.02.001.02.02  Extrusion lines for flat film and sheets
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.02  Extrusion lines
  • 03.02.001.02.03  Extrusion lines for tapes

Extrusion lines for tapes

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.02  Extrusion lines
  • 03.02.001.02.04  Extrusion lines for mono- and multifilaments

Extrusion lines for mono- and multifilaments

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.02  Extrusion lines
  • 03.02.001.02.05  Extrusion lines for pipes and profiles
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.02  Extrusion lines
  • 03.02.001.02.06  Extrusion lines for laminating and coating

Extrusion lines for laminating and coating

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.02  Extrusion lines
  • 03.02.001.02.07  Extrusion lines for sheathing of pipes and cables

Extrusion lines for sheathing of pipes and cables

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.02  Extrusion lines
  • 03.02.001.02.08  Extrusion lines for flexible hoses
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.003  Blow moulding machines
  • 03.02.003.01  Extrusion blow moulding machines

Extrusion blow moulding machines

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.004  Presses
  • 03.02.004.01  Compression moulding machines and transfer moulding machines
  • 03.02.004.01.01  Compression and transfer moulding presses for plastics

Compression and transfer moulding presses for plastics

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.004  Presses
  • 03.02.004.01  Compression moulding machines and transfer moulding machines
  • 03.02.004.01.02  Compression and transfer moulding presses for rubber

Compression and transfer moulding presses for rubber

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.006  Calenders

Calenders

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.008  Sheet casting machines

Sheet casting machines

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Integrated automation
  • 03.07.002  Material handling
  • 03.07.002.05  Dosing and metering equipment
  • 03.07.002.05.01  Volumetric dosing and metering equipment

Volumetric dosing and metering equipment

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Integrated automation
  • 03.07.002  Material handling
  • 03.07.002.05  Dosing and metering equipment
  • 03.07.002.05.02  Gravimetric dosing and metering equipment

Gravimetric dosing and metering equipment

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.08  Ancillary equipment
  • 03.08.007  Melt pumps

Our products

Product category: Twin screw extruders

12 and 16 mm Twin screw compounders

Our smallest range of twin screw extruders are with 12 and 16 mm screw diameter. The 12 mm version is available with 36 L/D and the 16 mm version can be made with practically any L/D you require, up to 60 or even more.

More Less

Product category: Single screw extruders

Single screw extruders

Our range of single screw extruders covers screw diameters of 8, 12, 20, 25, 30, 40 and 45 mm all with L/D of 30. Also longer and shorter L/D ratios are available on request. The 25, 30, 40 and 45 mm extruders are also available as vented version. All extruders can also be supplied with Vector Motor drives as well as in low boy version and with height adjusment to be used for co-extrusion applications

More Less

Product category: Single screw extruders

Height adjustable co-ex extruders

All our single screw extruders can be supplied with large height adjustments so they can be connected to all layers of a co-ex pancake die. This version is also ideal when the smae extruders are being used for both co-ex film blowing and cast sheet and film applications.

More Less

Product category: Compounding lines

Compounding lines with twin screw extruders

We have a large range of laboratory twin screw extruders which are used for producing compounds for samples as well as small production runs. Sice of our twin scrwew compounding lines are from the smallest with a 12 mm diameter twin screw, to our largerst 26 mm version. The output range varies from as litle as a few hundred grams up to around 130 kg/hr Please see more detailed descriptions on our twin screw extruders in the below Product Category "Extruder, twin screw type"

More Less

Product category: Extrusion lines for flexible hoses

Hose extrusion lines, single and co-ex

Our hose extrusion lines are available both with single as well as multilayer co-ex versions. The lines comprises of single screw extruders from 12.5 to 45 mm on diameter and with 30 L/D (longer on request). The extruders are connected to downstream vacuum calibration and cooling bath, cater pillar haul off and winder of various sizes, depending on hose sizes.

More Less

Product category: Extrusion lines for blown film

CO-Extrusion film blowing lines up to 9 layers

Our CO-EX film blowing lines are available in many sizes from the smallest version with 12.5 mm extruders to the largest with 25, 30 and 45 mm extruders, covering lay flat film widths from as small as 100 mm to 600 mm. All lines are equipped with our in house produced pancake type dies which are designed under consultation with Compuplas, Canada.

More Less

Product category: Mixers, batch type, for solids

High Speed laboratory and pilot plant mixers

Our range of high speed mixers include small bench top version with bowl volumes from 1,5 liters to 10 liters as well as floor version ranging from 5 liter to 75 liter bowl volumes. Attached cooler mixers are also available for our 5 and 10 liter versions.

More Less

Product category: Mixers, batch type, for solids

Bench top high speeed mixersmixers

Small high speed mixers with bowl volumes from 1,5 to 10 liters, ideal for small batch mixing of powders

More Less

Product category: Two roll mills

Laboratory Two-Rol mills for plastics and rubber

Our range of laboratory two-roll mills covers sizes from a 100 mm bench top version to 100, 150 and 200 mm floor versions. The mills are avaible in manual versions as well as Hands Free fully computerized version. The 110, 150 and 200 size plastic processing mills are equipped as standard with infinite variable speed drives, on for each roll which enables a large variety of friction ratios, from 1:1 up to 30:1. The mills are equipped with 3-zone electric roll heating system for optimum temperature precision over the entire roll surface. All mills are built with highest international safety standards like CE, KOSHA etc.

The 110,150 and 200 size polymer mills can be supplied in the fully automatic hands free version with large touch screen controls. These mills utilizes a roll over device which will automatically mix the batch

Our rubber mill have heavy duty  infinite variable speed direct drives of each rolls through fully encklosed bevel motor gears coupled directly to the roll shafts.

More Less

Product category: Pelletizers

SideCut pelletizer that can cut anything a scissors can

Our unique SideCut pelletizers are produced with worldwide lisence from Hoshipla, Japan. They utilize a fan shaped cutting rotor with angled knives against the fixed knife. This results in a cutting actions which is similar to that of a scissors and thus can easily cut very soft resins which normally cannot be processed on traditional drum type pelletizers. But the pelletizer can also cut very hard resins of engineering types with fiber reinforcments etc. The pellet length is also adjustable from 0.25 to 45 mm. The long pellets are very useful for fiber reinforced plastics to maintain maximum length of fibers. Additional features are:

Available in 3 sizes with max outputs of 110 kg/hr, 370 kg/hr and 600 kg/hr
As standard equipped with varible strand feeding for variance of pellet lengths and controlled by two digital instruments where you can set pellet lengths with 0.1 mm accuracy and where the set length will be maintained regardless of the infeed and cutting speed.
Also available in special versions for producing micropellets

More Less

Product category: Pelletizers

Pelletizer, conventional strand cutting versions

We have a comparatively large range of pelletizers ranging from traditional drum type versions to the unique SideCut strand pelletizer and to aunder water pelletizer. The conventional strand pelletizer has the following features:

available in 3 sizes with outputs up to 10 kg/hr, 150 kg/hr and 400 kg/hr
Featuring direct drive of rotor knives on the two smaller sizes and belt drive on the largest version, all with infinite variable speeds
With fixed speed strand feeding for one pellet size od optionally with variable strand feeding for pellet lengths from 1.0 to 6.0 mm
Digital speed controls and for the versions with variable strand feeding which is equipped with an additional controller which will digitally set the pellet length and control this regardless of the cutting speed.

More Less

Product category: Pelletizers

Underwater pelletizer

Our underwater pelleizer was primarily designed to be used with our 26 mm twin screw extruder but it can of course also be used with other brands. The max output is approximately 150 kg/hr ajnd the pelletizer features a under water die face cutter, water circulating system which brings the pellets to circular centrifugal drier. The pellets are effectively dried in this unit and after this lead to a classifier which will seperate any eventual over or undersized pellets.

More Less

Product category: Screen changers

Manual screen changers

We produce a set of manual screen changers which are primarily designed for our own range of single screw extruder, available in sizes fro 20 to 45 mm screw diameters

More Less

Product category: Melt pumps

Computeized filter tester in full conformity to the DIN norm

Our computerized filter testers are used for qualty controls and research. The testers comprises of a 20 or 25 mm single screw extruder connected to a melt gear pumps which in turn will lead the melted plastic through a nozzle with a filter. The filters are available in many different micron sizes wher the finest is 5 mictons. The filter will catch all impurities in the compound which is larger than the micron size of the filter and with this. the pressure will gradually build up on the filter. The on board computer with large screen will record and show on a graph the build up of the filter pressure for a certain test batch.

More Less

Product category: Twin screw extruders

Compounding lines with single screw extruders

Our range of single screw extruders can also be used for compounding as long as it is with low content of pigment, additives, fillers etc. But they can also be used for convertingighly filled compounds which have been produced on a banbury or two-roll mill and then being ground down to granules which are then fed into the single screw extruder and converted to regular pellets.

More Less

Product category: Compounding lines

Scientific

Labtech Engineering is the No.1 choice for polymer processing and research organizations world-wide, with one of the largest ranges of laboratory and pilot plant plastic processing machines. The product range includes their highly popular twin & single screw extruders, co-ex and single layer sheet & film extrusion lines; Two Roll Mills, presses, filter testers, pelletizing systems and Co-Ex and single layer bottle blow moulding lines.

More Less

Product category: Twin screw extruders

Twin screw extruders

Our range of twin screw extriders covers sizes of 12, 16, 20 and 26 mm. The 16, 20 and 26 mm versions are available with L/D up to 60 and more if required. All twins features modular clam shell barrels and a large variety of exchangeable screw elements designs. The twins are as standard supplied with volumetric single or twin scree feeeders and all sizes except the 12 mm verion can be equipped with side feeders. Also available is a large variety of gravimetric feeders.

More Less

Product category: Mixers, batch type, for solids

High Speed fluid mixers

    

More Less

Product category: Extrusion lines for blown film

CO-EX multi layer film blowing lines

Our co-ex mukltilayers film blowing lines are available with up to 9 layers and with extruder sizes from 12.5 mm to 45 mm

More Less

Product category: Extrusion lines for blown film

Ultra Micro film blowing line

Our Ultra Micro film blowing line is the smallest in the world and features an extruder with conical 18 to 8 mm screw, 30 L/D  and with 20 mm spiral die. For a max film lay flat width of 100 mm. It can bow a nice film from a very small batch of PE or as little as 25 gram

More Less

Product category: Extrusion lines for blown film

Single layer blow film line

Our compact film blowing line is very popular with masterbatch producer since it gives a very good dispersion and good resin economy, using only half a kg of PE to produce a nice film. This line uses a 20 mm extruder coupled to a 40 mm diamweter film die and a film tower with a roll width of 250 mm.

The next larges single layer film blowing line is equipped with a 25 mm diameter extruder with 30 L/D and with a film die of 50 mm diamweter. The tower has a Nip-Roll width of 400 mm

More Less

Product category: Extrusion lines for flat film and sheets

Co-Extrusion Cast film and sheet lines for up to 9 layers

The range of co-ex cast film and sheet lines covers a large variety of chill roll sizes with film and sheet widths from 150 to 600 mm. These lines can be equipped with single screw extruders rnging in size from 12.5 mm to 45 mm and with different types of feed blocks as well as multi manifold dies

More Less

Product category: Extrusion lines for flat film and sheets

Ultra Micro cast film and sheet line

The new Ultra Micro cast film and sheet line is designed for extremely small runs, uising a unique conical 18 to 8 mm songle screw extruder which can run with regular pellet sizes but still make a film or sheet from a very small batch size of only 50 gram. The extruders has a die width of 50 mm (optional 75 mm) and the chill rollunitg utilizes a DC motor drive rolling stack with 3 rolls with water cooling. The top roll is manually adjusted against the center roll. The unit is supplied with motor driven wind up.

More Less

Product category: Extrusion lines for flat film and sheets

Single layer flat film and sheet casting lines

Our comprehensive range of single layer cast film and sheet units covers sizes from our Ultra Micro cast film line with die width of only 50 mm to our largest version with roll widths of 700 mm and for max film width of 600 mm. They can be equipped with extruders with screw sizes from 8 to 45 mm.

More Less

Product category: Extrusion lines for pipes and profiles

Pipe, profile and hose extrusion lines

Our pipe, hose and profile extrusion lines are available both with single as well as multilayer co-ex versions. The lines comprises of single screw extruders from 12.5 to 45 mm on diameter and with 30 L/D (longer on request). The extruders are connected to downstream vacuum calibration and cooling bath, cater pillar haul off and winder, alternatively saw cutter and stacker.

More Less

Product category: Extrusion lines for pipes and profiles

Medical Tubing extrusion lines

We have recently acquired a lisence from YVROUD, France to produce medical tubing lines. The first line from this lisence will be shown at our K2013 booth and it comprises of a 25 mm extruder, a bilumen die, vacuum and cooling bath, hail of unit with flying knife cutter and a pneumatic stacking unit. The line will also feature a diimension controlling system from Zumbach. The line will produce at K a 2 mm diameter medical tube in polyurethane. The tube have 2 hollows, s.k. bilumen.

More Less

Product category: Extrusion lines for laminating and coating

Laminating and coating extrusion lines

Our range of cast film attachments can be supplied with un wind units for laminating the film or sheet both on top and bottom sides. We use hwere unwind units mounted over and below the central cill roll. This lamination units are also applicable for co-extrusion casting lines

More Less

Product category: Extrusion lines for flexible hoses

Flexible hose lines

Our hose lines are available both with single as well as multilayer co-ex versions. The lines comprises of single screw extruders from 12.5 to 45 mm on diameter and with 30 L/D (longer on request). The extruders are connected to downstream vacuum calibration and cooling bath, cater pillar haul off and winder, alternatively knife cutter and stacker.

More Less

Product category: Extrusion blow moulding machines

Bottle blow moulding lines

The bottle blow moulding attachment can be connected to our 20 and 25 mm single screw extruders and is available both as a singler layer version as well as a Co-Ex version for 2 and 3 layers. The attachment is fully hydraulic and fully automatic and will produce bottles of up to 125 ml sizes. This bottle blow moulding attachment is made as a stand alone unit so the extruders can be easily disconnected and be used for other applications.

More Less

About us

Company details

Company profile:

Labtech Engineering was founded in Thailand 33 years ago and is today one of the largest producer in the world of laboratory polymer processing machines. We are manufacturing our machines under Swedish management and technology with a very dedicated Thai staff of engineers and technicians. A few years ago we moved into our ultra modern manufacturing facility with state of the art manufacturing equipment.

More Less

Company data

Sales volume

5 - 20 Mill. US $

Export content

> 75%

Number of employees

101 - 500

Foundation

1985

Area of business

Machinery and equipment for the plastics and rubber industries

Target groups
  • Chemical industry
  • Packaging / distribution
  • Vehicle construction / aerospace
  • Medical technology / precision engineering / optics

Company information as a PDF file