Plasmec S.r.L.

Via Europa, 79 , 21015 Lonate Pozzolo (VA)
Italy

Telephone +39 0331 301648
Fax +39 0331 301749
comm@plasmec.it

Trade fair hall

  • Hall 9 / A60
 Interactive Plan

Hall map

K 2016 hall map (Hall 9): stand A60

Fairground map

K 2016 fairground map: Hall 9

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.001  Mixers
  • 03.01.001.03  Mixers, batch type, for solids
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.009  Compounding lines

Our products

Product category: Mixers, batch type, for solids, Compounding lines

HC COMBIMIX - Hot / cold mixing combination

Horizontal cooler combination is the combination of the heating mixer TRM and the high efficiency horizontal cooler HEC.
The HEC range of coolers is used for this combination, can be applied to any type of turbomixer TRM and this is the ideal solution for all manufacturing needs in the field of rigid or plasticized PVC dry-blend. 
This equipment is built entirely of stainless steel as regards the parts in contact with the material and double or triple jacket for circulation of cooling water.
Available with capacities from 300/1000 lt. up to 2.500/8.500 lt., the HC COMBIMIX stands out for its great and proven efficiency, allowing excellent throughput and high standards of quality.

More Less

Product category: Mixers, batch type, for solids

TRR - OVERTURNING TURBO MIXER

The TRR overturning container mixer is the ideal alternative to traditional turbomixers when production conditions require high levels of flexibility and involve a wide range of different products to me mixed with the same machine.
Thanks to the special construction which is divided into two distinct and separate parts (mixing head and container hopper), cleaning times are reduced to a minimum, as the risk of contamination when changing from one type of product to another.
Storage and transport of the mixtures is also facilitated by direct use of same containers,which can easily be inserted into a batching system.  It is suitable for:
- Cold mixing of polymers in powder or granular form with pigments, fillers and additives.
- Pre-mixing of all kinds of powders
- Powder Coatings
- Concentrated masterbatches
- Compounds of PVC, PE, PP, PS, PA, TPE, ABS, EPS...

More Less

Product category: Mixers, batch type, for solids, Compounding lines

WOOD PLASTIC COMPOSITE - COMBIWOOD

PLAS MEC a leading company in the manufacture of mixing equipment and ancillaries for plastic industry, thanks to the in depth cooperation of major extruder manufacturers and research institutes, has developed a new concept for mixing plants for processing wood natural fibres with plastics.
When using PLAS MEC mixing and cooling equipment, it is possible to increase the bulk density of the components, extract the moisture of the wood fibres and distribute the additives.

More Less

Product category: Mixers, batch type, for solids

METALLIC BONDING

PLAS MEC has developed these mixing plants, reliable and symple systems for powder coatings pre-mixing process, COMBIBOND HC/B and TRR/B CONTAINER MIXER.

More Less

Product category: Compounding lines

RV COMBIMIX

PVC mixer RV COMBIMIX is the combination of the heating mixer TRM and the vertical cooler RF.
Capacities from 200 to 3.600

More Less

Company news

Date

Topic

Download

Jul 21, 2016

How to cool over 8 batches per hour of U-PVC from 120°C to 40°C.

The development and optimization of the coolers of mixing plant is the latest innovation launched by PLAS MEC and has been welcomed with great interest.

Thanks to PLAS MEC, today it is a straightforward task to cool over 8 batches per hour of U-PVC from 120°C to 40°C.

The new water circuit design increases cooling efficiency enabling a significant increase in the productivity of the cooler and, therefore, the mixing plant.

The new cooling interspace can withstand a working pressure of 2.5 bar, a typical pressure of factory closed circuit chillers. This, in addition to increasing the efficiency of heat exchange, solves many critical issues typical of closed circuit chillers.

The PLAS MEC technical team has developed this innovation through close collaboration with its customers and by systematically analyzing and comparing data in order to create new ideas and continuously innovate our products.

More Less

About us

Company details

Since 1967 PLAS MEC has designed and manufactured industrial mixing equipment.

The engineering & research department is run by a team of highly specialized engineers that develop both a wide range of mixing plants and a large-scale customized mixing lines suitable for innovative applications.

The mixing equipment is used in a range of process industries as PVC DRY BLEND, POWDER COATINGS, MASTERBATCH and PIGMENTS, THERMOPLASTIC RUBBERS, WOOD PLASTIC COMPOSITES and much more.

The specific knowledge in mixing equipment, which has been matured on the basis of a long experience in mixing technology, is the foundation for creating high performing plants.  Each key component is developed and manufactured internally; PLAS MEC can provide with a complete plant or with single components that can be integrated in the existing mixing systems.

The skilled technicians are travelling worldwide to support the customers and to ensure that their mixing systems remain competitive in the long run. PLAS MEC mixing plants are designed and manufactured with the aim of requiring minimum maintenance.

PLAS MEC has its own testing room equipped with the whole range of mixing machineries. Customers can test, together with the technical engineers their products in order to evaluate the best mixing plant for their production needs.

About 95% of the production is exported worldwide and there are more than 1.800 customers operating more than 5.600 PLAS MEC mixing plants around the world.

The company maintains and supports these markets with an extended network of agents. PLAS MEC is proud to have amongst its customers many wellknown companies in the world of plastic material processing.

To know more about the product range of horizontal mixer, vertical mixer or laboratory mixer and to submit any queries related to mixing equipment or process industries send an-email to comm@plasmec.it

More Less

Company data

Export content

> 75%

Number of employees

31 - 100

Foundation

1967

Area of business

Machinery and equipment for the plastics and rubber industries

Target groups

Rubber manufacturing / processing

Company information as a PDF file