Krelus AG

Ausserfeldstr. 14 , 5036 Oberentfelden
Switzerland

Telephone +41 62 7393070
Fax +41 62 7393089
krelus@krelus.ch

Trade fair hall

  • Hall 3 / E34
 Interactive Plan

Hall map

K 2016 hall map (Hall 3): stand E34

Fairground map

K 2016 fairground map: Hall 3

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.03  Post processing machines and downstream equipment
  • 03.03.001  Thermoforming machines
  • 03.03.001.02  Thermoforming machines for sheets

Thermoforming machines for sheets

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.05  Welding machines
  • 03.05.009  Infrared welding machines
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Integrated automation
  • 03.07.001  Process control technique
  • 03.07.001.01  Control equipment
  • 03.07.001.01.03  Closed loop control equipment for temperature

Closed loop control equipment for temperature

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.08  Ancillary equipment
  • 03.08.001  Surface pretreatment equipment

Surface pretreatment equipment

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.10  Parts and components
  • 03.10.005  Heating elements

Heating elements

Our products

Product category: Infrared welding machines

Energy saving with KRELUS IR-Heaters

For many years a fact already - but an urgency today:
The installation of KRELUS Infrared-Heaters
allow significant engergy savings!
For more than 40 years, KRELUS AG has specialised in the supply of custom made Infrared heating solutions. With this long term experience with customer needs, we are the most competent partner for custom made Infrared heaters for:

· Converting of paper, films and foils
· Textil, film, paper and foil coating
· Thermoforming
· Embossing
· Laminating machine
· Pre-drying and heating equipment
· etc.

The superior KRELUS technology applies direct radiation from the heat source to the product. The special heater construction effectively blocks the heat loss to the reverse side of the heater. The fast medium-wave KRELUS-IR-heater allows operations with precise temperature control on product surfaces. Due to the very rapid reaction time of these IR-heaters, they can be switched off even for short breaks. With the optimised emission of the heat energy in the real medium wave range (+/- 3 microns) - where almost all products have best absorption - the KRELUS-IR-heater is more efficient and superior in comparison to traditional infrared heaters and allows energy and cost savings.
KRELUS has now extended its range of made-to-measure IR infrared heaters with four standard models. Using identical technology, we are now able to supply the sizes 248 x 248 mm, 123 x 496 mm, 123 x 248 mm and 78 x 396 mm. These four new modules allow individually controlled radiation zones to be easily constructed to any desired size. These new KRELUS-IR heaters are of course particularly suited for use in thermoforming equipment and on continuous running lines to give accurate and consistent temperature profiles.
We shall be pleased to welcome you at our booth at K'2010: Hall 3, Stand 3E34

More Less

Product category: Infrared welding machines

Energy saving with KRELUS IR-Heaters

For more than 40 years, KRELUS AG has specialised in the supply of custom made Infrared heating solutions. We are the most competent partner for custom made IR-heaters for:

• Converting of paper, films and foils

• Textil, film, paper and foil coating

• Thermoforming

• Embossing

• Laminating machine

• Pre-drying and heating equipment

• etc.

The superior KRELUS technology applies direct radiation from the heat source to the product. The special heater construction effectively blocks the heat loss to the reverse side.

The fast medium-wave KRELUS-IR-heater allows operations with precise temperature control on product surfaces. Due to the very rapid reaction time of these IR-heaters, they can be switched off even for short breaks. With the optimised emission of the heat energy in the real medium wave range (+/- 3 microns) - where almost all products have best absorption - the KRELUS-IR-heater is more efficient and superior in comparison to traditional infrared heaters and allows energy and cost savings.

We are now able to supply the sizes 248 x 248 mm, 123 x 496 mm, 123 x 248 mm, 78 x 396 mm, 123 x 123 mm and 248 x 61 mm. These six new modules allow individually controlled radiation zones to be easily constructed to any desired size. These new KRELUSIR heaters are of course particularly suited for use in thermoforming equipment as well as on continuous running lines to give accurate and consistent temperature profiles.

We shall be pleased to welcome you at our booth at K’2013: Hall 03, Stand 3E34

KRELUS AG, Ausserfeldstrasse 14, CH-5036 Oberentfelden,

Tel. ++41 62 739 3070, Fax ++41 62 739 3089,

E-Mail: krelus@krelus.ch, http://www.krelus.ch

More Less

Product category: Infrared welding machines

Energy saving with KRELUS IR-Heaters

For more than 40 years, KRELUS AG has specialised in the supply of custom made Infrared heating solutions. We are the most competent partner for custom made IR-heaters for:

• Converting of paper, films and foils

• Textil, film, paper and foil coating

• Thermoforming

• Embossing

• Laminating machine

• Pre-drying and heating equipment

• etc.

The superior KRELUS technology applies direct radiation from the heat source to the product. The special heater construction effectively blocks the heat loss to the reverse side.

The fast medium-wave KRELUS-IR-heater allows operations with precise temperature control on product surfaces. Due to the very rapid reaction time of these IR-heaters, they can be switched off even for short breaks. With the optimised emission of the heat energy in the real medium wave range (+/- 3 microns) - where almost all products have best absorption - the KRELUS-IR-heater is more efficient and superior in comparison to traditional infrared heaters and allows energy and cost savings.

We are now able to supply the sizes 248 x 248 mm, 123 x 496 mm, 123 x 248 mm, 78 x 396 mm, 123 x 123 mm and 248 x 61 mm. These six new modules allow individually controlled radiation zones to be easily constructed to any desired size. These new KRELUSIR heaters are of course particularly suited for use in thermoforming equipment as well as on continuous running lines to give accurate and consistent temperature profiles.

We shall be pleased to welcome you at our booth at K’2013: Hall 03, Stand 3E34

KRELUS AG, Ausserfeldstrasse 14, CH-5036 Oberentfelden,

Tel. ++41 62 739 3070, Fax ++41 62 739 3089,

E-Mail: krelus@krelus.ch, http://www.krelus.ch

More Less

Product category: Infrared welding machines

Energy saving with KRELUS IR-Heaters

For more than 40 years, KRELUS AG has specialised in the supply of custom made Infrared heating solutions. We are the most competent partner for custom made IR-heaters for:

• Converting of paper, films and foils

• Textil, film, paper and foil coating

• Thermoforming

• Embossing

• Laminating machine

• Pre-drying and heating equipment

• etc.

The superior KRELUS technology applies direct radiation from the heat source to the product. The special heater construction effectively blocks the heat loss to the reverse side.

The fast medium-wave KRELUS-IR-heater allows operations with precise temperature control on product surfaces. Due to the very rapid reaction time of these IR-heaters, they can be switched off even for short breaks. With the optimised emission of the heat energy in the real medium wave range (+/- 3 microns) - where almost all products have best absorption - the KRELUS-IR-heater is more efficient and superior in comparison to traditional infrared heaters and allows energy and cost savings.

We are now able to supply the sizes 248 x 248 mm, 123 x 496 mm, 123 x 248 mm, 78 x 396 mm, 123 x 123 mm and 248 x 61 mm. These six new modules allow individually controlled radiation zones to be easily constructed to any desired size. These new KRELUSIR heaters are of course particularly suited for use in thermoforming equipment as well as on continuous running lines to give accurate and consistent temperature profiles.

We shall be pleased to welcome you at our booth at K’2013: Hall 03, Stand 3E34

KRELUS AG, Ausserfeldstrasse 14, CH-5036 Oberentfelden,

Tel. ++41 62 739 3070, Fax ++41 62 739 3089,

E-Mail: krelus@krelus.ch, http://www.krelus.ch

More Less

Product category: Infrared welding machines

Energy saving with KRELUS IR-Heaters

For more than 40 years, KRELUS AG has specialised in the supply of custom made Infrared heating solutions. We are the most competent partner for custom made IR-heaters for:

• Converting of paper, films and foils

• Textil, film, paper and foil coating

• Thermoforming

• Embossing

• Laminating machine

• Pre-drying and heating equipment

• etc.

The superior KRELUS technology applies direct radiation from the heat source to the product. The special heater construction effectively blocks the heat loss to the reverse side.

The fast medium-wave KRELUS-IR-heater allows operations with precise temperature control on product surfaces. Due to the very rapid reaction time of these IR-heaters, they can be switched off even for short breaks. With the optimised emission of the heat energy in the real medium wave range (+/- 3 microns) - where almost all products have best absorption - the KRELUS-IR-heater is more efficient and superior in comparison to traditional infrared heaters and allows energy and cost savings.

We are now able to supply the sizes 248 x 248 mm, 123 x 496 mm, 123 x 248 mm, 78 x 396 mm, 123 x 123 mm and 248 x 61 mm. These six new modules allow individually controlled radiation zones to be easily constructed to any desired size. These new KRELUSIR heaters are of course particularly suited for use in thermoforming equipment as well as on continuous running lines to give accurate and consistent temperature profiles.

We shall be pleased to welcome you at our booth at K’2013: Hall 03, Stand 3E34

KRELUS AG, Ausserfeldstrasse 14, CH-5036 Oberentfelden,

Tel. ++41 62 739 3070, Fax ++41 62 739 3089,

E-Mail: krelus@krelus.ch, http://www.krelus.ch

More Less

Product category: Infrared welding machines

Energy saving with KRELUS IR-Heaters

For more than 40 years, KRELUS AG has specialised in the supply of custom made Infrared heating solutions. We are the most competent partner for custom made IR-heaters for:

• Converting of paper, films and foils

• Textil, film, paper and foil coating

• Thermoforming

• Embossing

• Laminating machine

• Pre-drying and heating equipment

• etc.

The superior KRELUS technology applies direct radiation from the heat source to the product. The special heater construction effectively blocks the heat loss to the reverse side.

The fast medium-wave KRELUS-IR-heater allows operations with precise temperature control on product surfaces. Due to the very rapid reaction time of these IR-heaters, they can be switched off even for short breaks. With the optimised emission of the heat energy in the real medium wave range (+/- 3 microns) - where almost all products have best absorption - the KRELUS-IR-heater is more efficient and superior in comparison to traditional infrared heaters and allows energy and cost savings.

We are now able to supply the sizes 248 x 248 mm, 123 x 496 mm, 123 x 248 mm, 78 x 396 mm, 123 x 123 mm and 248 x 61 mm. These six new modules allow individually controlled radiation zones to be easily constructed to any desired size. These new KRELUSIR heaters are of course particularly suited for use in thermoforming equipment as well as on continuous running lines to give accurate and consistent temperature profiles.

We shall be pleased to welcome you at our booth at K’2013: Hall 03, Stand 3E34

KRELUS AG, Ausserfeldstrasse 14, CH-5036 Oberentfelden,

Tel. ++41 62 739 3070, Fax ++41 62 739 3089,

E-Mail: krelus@krelus.ch, http://www.krelus.ch

More Less

About us

Company details

For more than 40 years we developed and produced Infrared-Heaters with highest performance and fast reaction. Due to the highly acknowledged Swiss quality, KRELUS is in a position to supply products worldwide to more than 60 countries. Our high performance equipments are used on all continents.

Our main competency is the precise application, planning and execution of our customers' requirements. Thanks to the innovative technology of our products we can usually find solutions with substantial energy saving effects for our customers.

We shall be pleased to welcome you at our booth at K’2016: Hall 03, Stand 3E34

More Less