PLA Giken Co., Ltd.

39-6 Toyotsu-Cho , 564-0051 Osaka, Suita-City
Japan

Telephone +81 6 63304851
Fax +81 3 63304895
y.uchiyama@plagiken.co.jp

Trade fair hall

  • Hall 16 / B49
 Interactive Plan

Hall map

K 2016 hall map (Hall 16): stand B49

Fairground map

K 2016 fairground map: Hall 16

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.01  Extruders
  • 03.02.001.01.01  Single screw extruders

Single screw extruders

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.02  Extrusion lines
  • 03.02.001.02.07  Extrusion lines for sheathing of pipes and cables

Our products

Product category: Extrusion lines for sheathing of pipes and cables

Multilayer Tube Manufacturing Machine 3 materials in 5 layer

Pursuing added value of products, one of our answers is to manufacture multilayer products. By multilayering, our purpose is to bring out maximum function of resins and to provide products meeting customers' aims in various circumstances.
Our multilayer products surely provide features that single-layer products couldn't offer. In addition, knowing characteristics of resins, we have a multilayer tube inspection equipment to confirm physical aptitude.As an early manufacture of multilayer tube manufacturing machine in Japan, we, PLA GIKEN CO.,LTD. have successfully developed them from all angles with continuous commitment to customer satisfaction.

More Less

Product category: Extrusion lines for sheathing of pipes and cables

MDX / Extruder System

PLA GIKEN CO.,LTD. has sold this extruder system for medical tube since 1999 in Japan.
And PLA GIKEN CO.,LTD exhibited this system at first time in IPF(International Plastic Fair)/Japan in 1999. It was possible to manufacture strict tube for catheter by our system.
There are 2 kinds of molding for straight tube, one is vacuum sizing method for size standard of outside diameter, and the other is wire coating method for size standard of inside diameter. And there are 2 kinds of molding for different diameter tube, one is inner pressure method which is changed between high pressure and low pressure and the other is molding method for adapting for needed figure, which we can select the above methods optionally.
This MDX Extruder System is perfect machine, and we have delivered over 30 units in Japan.

More Less

Product category: Extrusion lines for sheathing of pipes and cables

Corrugator Pipe Manufacturing Machine

Until now the Corrugator machine was imported from Europe in Japan mainly.
But PLA GIKEN CO.,LTD .has sold Corrugator machine since 1999 by technical tie-up with CORELCO(France) which was first company to sell Corrugator machine by own technical in Japan.
There is new production using our Corrugator machine that is Multi-Layers(5-Layers) different diameter Corrugated Pipe in addition to CD-pipe and Double Wall Pipe in conventional, and this new type pipe is obtained high estimation in Japan.

More Less

Product category: Extrusion lines for sheathing of pipes and cables

Large Diamete Fluorine Plastic Pipe Manufacturing Machine

Traditionally, chlorofluorocarbon had been used to clean semiconductors. However, concerning environmental issues, ultrapure water has been alternative for chlorofluorocarbon.
Fluorine plastic pipes are used for ultrapure water pipes in factories and pipes for various devices. In addition, fluorine plastic pipes are applied to pipes in clean rooms and/or medical pipes, and are expanding field of use.
Our fluorine plastic pipe manufacturing machine possesses essential performances such as high-temperature extrusion, corrosion resistance, and clean room capability. To highly meet our customers' needs, we offer the best forming pattern for various fluorine plastic pipes.

More Less

Product category: Extrusion lines for sheathing of pipes and cables

Monofilament Manufacturing Machine

We are a leading company of a monofilament manufacturing machine in Japan.
Monofilament yarns are applicable to fishing lines, racket strings, plastic fiber-optic cables, and artificial hair. To improve added value, our machines are applicable tomultilayer monofilament manufacturing.
We manufacture an entire line of the machines from a feeding device to a winding machine, and we guarantee not only our machines but also accuracy of actual products.

More Less

Product category: Extrusion lines for sheathing of pipes and cables

Wire Coating Machine

While our MDX, a medical tube manufacturing machine,enables wire coating process, we have developed machines exclusively for wire coating. Features are as follows:
High speed manufacturing (maximum of 300 m/min.)Extra fine diameter (minimum of 0.003mm)Engineering plastic coating(using fluoroethylene resins, polyether ether ketone, etc.)Multilayer coating (achievement of maximum of 4 materials in 5 layers)Applicable to multipurpose resins

More Less

Product category: Extrusion lines for sheathing of pipes and cables

Vertical multilayer tube manufacturing machine

While tubes are manufactured in horizontal way in common, some tubes made of special materials are required to be manufactured vertically. In case of using low viscosity and low pull-down ratio material, having difficulty to keep tubular shape of thin thickness tubes, and/or requiring to avoid flat, our vertical manufacturing machine enable to manufacture and develop new products.
We have applied proven horizontal manufacturing system to thin thickness tube manufacturing system, and successfully developed solidification with high circularity and winding and cutting without creases. In addition, multilayer tubes shall expand application.

More Less

Product category: Extrusion lines for sheathing of pipes and cables

Multilayer Spiral Tube Manufacturing Machine

Traditionally, spiral tubes are formed off-line operation.
We have enable in-line operation; strings are spirally winded during formation of tubes.First, an internal tube is formed form two extruders through gear pump dies to a vacuum water-cooling bath. Second, strings are spirally winded, and lastly, the tube is preheated, armoring coated, and winded.

More Less

Product category: Extrusion lines for sheathing of pipes and cables

Multilayer Cross-Linking Polyethylene Tube Manufacturing

Multilayer Cross-Linking Polyethylene Tube Manufacturing Machine
[4 materials in 5 layers]
Hot-water floor heating system has become common for residential use. This machine is to manufacture tubes for hot-water floor heating system. Single-layer for traditional tubes and 2 or 3 layers for oxygen blocking tubes have been adopted. These multilayer tubes are formed with cross-linking polyethylene coated by gas barrier resins.
We have applied our multilayer extruders to co-extruders that enable inline manufacturing of 4 materials in 5 layer cross-linking polyethylene tubes. 2 or 3 layer structure would be capable of oxygen blocking tubes. However, considering length stability during cooling process, assembling stability, and/or material cost, 4 materials in 5 layer formation meet the conditions necessary for oxygen blocking tubes.
In addition, our multilayer cross-linking polyethylene tube manufacturing machines would be applied toother multilayer tube production.

More Less

About us

Company details

PLA GIKEN CO.,LTD was established as a specialized maker of "Extruder System" at Fukushima-ku Osaka, Japan in 1977.
We established Tokyo office in 1988 and factory at Suita Osaka,Japan, 1995. And in 2007 the construction of the laboratory adjacent to our factory was completed. We have kept making expansion and development until today.With our slogans, "the guarantee for clinets of products' quality and production capacity made by our supplied machinery" and "pursuing added value and product accuracy, we have achieved many satisfactory results both in Japan and abroad.
We also participated many exhibitions in Japan as well overseas such as ; IPF(International Plastic fair at Makuhari, Japan), K Messe(dusseldorf/Germany), MD&M WEST (Anaheim/USA), PLAST (Milan/Italy) and Chinaplas (Beijing/China). We have been promoting our technology through these exhibitions in the world.
We do not rest satisfied with the present. We will make our utmost efforts in new technology development and aim to expand and develop further as the company capable of meeting various needs in the industry.
We deeply appreciate your supports for us up till today and in the futere.

More Less