BST ProControl GmbH

Industriestraße 1 , 57482 Wenden
Germany

Telephone +49 2762 612-0
Fax +49 2762 612-390
info@bst-procontrol.com

Trade fair hall

  • Hall 10 / E46
 Interactive Plan

Hall map

K 2016 hall map (Hall 10): stand E46

Fairground map

K 2016 fairground map: Hall 10

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.09  Measuring and test equipment
  • 03.09.002  Measuring and test equipment for mechanical or dynamic properties
  • 03.09.002.01  Thickness gauges
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.09  Measuring and test equipment
  • 03.09.003  Measuring and test equipment for thermal properties

Measuring and test equipment for thermal properties

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.09  Measuring and test equipment
  • 03.09.008  Measuring equipment for moisture content

Measuring equipment for moisture content

Our products

Product category: Thickness gauges

BST ProControl systems for total process monitoring

BST ProControl systems

Various possibilities exist for the thickness measurement, e.g. the transmission process, ultrasonic and infrared sensor technology as well as the principle of optical triangulation.

IndiSpectro®

The measurement is based on the comparison of the optical coating thicknesses with the wave lengths of the light. Light irradiated on a transparent layer is partially reflected at the upper as well as at the lower interface.

IndiRay® X Ray < 5kV / Extended Range

When the transmission method is used for measuring, emitter and detector are facing each other, with the measured material in between. Radiation is weakened by the measured object, and the degree of weakening is subject to the density, thickness and composition of the measured object.

IR-Sensor - Patented infrared sensor technology
CONESPLIT® Same Spot Technology

Usually, Infrared sensors are offered as back-scattering sensors. Though if necessary, the construction as a transmission sensor is possible as well. Based on a patented measuring method, CONESPLIT® Same Spot Technology for direct (selective) online layer thickness measurement represents an advantage that sets BST ProControl apart from the competition.

Ultrasonic Sensor

The ultrasonic sensor utilizes the impulse echo measuring method. It sends out an ultrasonic impulse which is reflected by the measured object and then received again. The distance from the measured object to the sensor is specified by the runtime of the impulse.

Lasersensor

This sensor is based on the triangulation measuring method. Here, a focused infrared-beam produces a spot of light on the measured material. The reflected part of the beam is recorded by a PSD/CCD-detector within the sensor and therefore enables the exact calculation of the distance to the object.

Isotope Backscatter Sensor

Isotope transmission measurement is a contact-free measuring method, measuring the basis weigth (g/m2). It uses the fact that all radiation is decreased when passing through materials.

Camera-based Sensor

The principle of optical triangulation is the basis for DELTA MASTER 3 sensors. It measures the material’s surface by projecting a fine measuring line upon it. A geometrically ultra-stable matrix CCD camera charts the visualization of this line and evaluates it on the basis of digital image processing methods.

More Less

Product category: Thickness gauges

BST ProControl systems for total process monitoring

IR-Sensor - Patented infrared sensor technology
CONESPLIT® Same Spot Technology

Usually, Infrared sensors are offered as back-scattering sensors. Though if necessary, the construction as a transmission sensor is possible as well. Based on a patented measuring method, CONESPLIT® Same Spot Technology for direct (selective) online layer thickness measurement represents an advantage that sets BST ProControl apart from the competition.

More Less

Product category: Thickness gauges

Camera-based Sensor

The principle of optical triangulation is the basis for DELTA MASTER 3 sensors. It measures the material’s surface by projecting a fine measuring line upon it. A geometrically ultra-stable matrix CCD camera charts the visualization of this line and evaluates it on the basis of digital image processing methods.

More Less

Product category: Thickness gauges

SHADEX Sensor

The non-contact measurement principle bases on the precise definition of a linear fanned out laser beam. The thickness of the material causes the shading within the measuring area and a proportional influence of the receiver diode takes place. A distance measuring system compensates the distance changes between the sensor and the reference roller, whereupon the results are evaluated by a special digital signal processing technique which determines the exact material thickness.

More Less

Product category: Thickness gauges

IndiRay® X Ray < 5kV / Extended Range

When the transmission method is used for measuring, emitter and detector are facing each other, with the measured material in between. Radiation is weakened by the measured object, and the degree of weakening is subject to the density, thickness and composition of the measured object.

More Less

About us

Company details

BST ProControl (formerly betacontrol & Protagon) is specialized in the measurement and quality assurance of flat materials. The business area of BST ProControl includes the planning, production, implementation and modernization of components for measuring and controlling. The main focus is on the quality assurance by means of non-contact and non-radiometric measuring solutions.

Application friendly adjusted sensors combined with a cleverly devised automation and visualization system provide for precise registrations and full monitoring by

basis weight measurement
layer thickness measurement
density measurement
moisture measurement
ash measurement
coat-weight measurement
thickness measurement

of band- and plate-shaped materials of the kind required for the production of

plastic and metal sheeting
paper
textiles
foams
floor coverings
non-woven fabrics
metal sheets
products for the automotive industry.

The characteristics of these materials are precisely recorded, comprehensively monitored and analyzed by the above mentioned systems.

BST ProControl is a member of the BST-group and co-exhibitor of the parent company BST International.

More Less