Plastay Kimya San. ve Tic. A.S.

Gebze Güzeller Organize San. Bölgesi, Inönü Mah. Atatürk Bulvari No: 22 , 41400 Gebze, Kocaeli
Turkey

Telephone +90 262 6795300, +90 530 5480406
Fax +90 262 6795391
harunsungur@plastay.com, info@plastay.com

This company is co-exhibitor of
ASKIM Stabilizatör Kimyevi Maddeler Sanayi ve Ticaret Ltd. Sti.

Trade fair hall

  • Hall 5 / B24
 Interactive Plan

Hall map

K 2016 hall map (Hall 5): stand B24

Fairground map

K 2016 fairground map: Hall 5

Our range of products

Product categories

  • 01  Raw materials, auxiliaries
  • 01.02  Thermoplastic elastomers
  • 01.02.009  Thermoplastic elastomers based on PVC, TPE/PVC

Thermoplastic elastomers based on PVC, TPE/PVC

  • 01  Raw materials, auxiliaries
  • 01.02  Thermoplastic elastomers
  • 01.02.010  Olefin based thermoplastic elastomer, TPO

Olefin based thermoplastic elastomer, TPO

  • 01  Raw materials, auxiliaries
  • 01.02  Thermoplastic elastomers
  • 01.02.012  SEBS-Blockcopolymer

SEBS-Blockcopolymer

  • 01  Raw materials, auxiliaries
  • 01.02  Thermoplastic elastomers
  • 01.02.013  TPV-thermoplastic vulcanised material

TPV-thermoplastic vulcanised material

  • 01  Raw materials, auxiliaries
  • 01.10  Additives
  • 01.10.005  Adipates

Adipates

  • 01  Raw materials, auxiliaries
  • 01.10  Additives
  • 01.10.044  Epoxy plasticiser

Epoxy plasticiser

  • 01  Raw materials, auxiliaries
  • 01.10  Additives
  • 01.10.090  Phthalate plasticisers

Phthalate plasticisers

  • 01  Raw materials, auxiliaries
  • 01.10  Additives
  • 01.10.104  Secondary plasticisers

Secondary plasticisers

  • 01  Raw materials, auxiliaries
  • 01.10  Additives
  • 01.10.126  Plasticiser

Our products

Product category: Plasticiser

E.S.B.O ( Epoxidized Soybean Oil )

Plasticizer and stabilizer obtained by epoxdising of soybean oilSPECIALITES

Appearance : Clear, Colourless Liquid
Odour : Slight, Typical
Water Content : Max. %0,05 (ASTM D 1364)
Viscosity : 325 cp (20 ºC )(ASTM D 1045)
Density : 0,996 g/cm³ (20 ºC) (ASTM D 1045)
Refractive Index : 1,472 (25 ºC) (ASTM D 1045)
Acid Index : Max. 1,00 mg KOH /g (ASTM D 1045)
Flash Point : Min. 300 ºC (OPEN POT)

More Less

Product category: Plasticiser

D.I.N.P ( Di Isononyl Phthalate )

Product received from phthalic anhydride under reaction of isononyl alcohol an esters; plastisicer.

SPECIALITES

Appearance : Clear, Colourless Liquid
Odour : Slight, Typical
Moleculer Weight : 418
Water Content : Max. %0,05 (ASTM D 1364)
Viscosity : 70-80 cp (20 ºC )(ASTM D 1045)
Density : 0,970 – 0,974 g/cm³ (20 ºC) (ASTM D 1045)
Refractive Index : 1,4830 - 1,4870 (20 ºC) (ASTM D 1045)
Acid Index : Max. 0.07 mg KOH /g (ASTM D 1045)
Flash Point : Min. 205 ºC (OPEN POT)
Chemical Formula : C6H4(COOC9H19)2

USAGES

At all vinly and its applications, artifical soles and calenderization. DINP is prefered case of low viscosite PVC paste applications

ADVANTAGES

Does not cause chemical changes at polymers, but executes physical and mechanical changes
May jelly all the polymeric materials quickly and easily
Resisting the heat, increases the life of plastics.
Could be solved with general solvents.
Could ve mixed with all monopmers at soften of PVC.
Supplies lightening.
Electrical resistance is seen.
Could not be extracte with water.
Could perform in low temperature.

More Less

Product category: Plasticiser

D.O.P ( Di Octyl Phthalate)

Product received from phthalic anhdyride under reaction with 2-ethylhexanol an estersİ plastisicer.

SPECIALITES

Appearance : Clear, Colourless Liquid
Odour : Slight, Typical
Moleculer Weight : 390
Water Content : Max. %0,05 (ASTM D 1364)
Viscosity : 76-84 cp (20 ºC )(ASTM D 1045)
Density : 0,980 – 0,984 g/cm³ (20 ºC) (ASTM D 1045)
Refractive Index : 1,4825 - 1,4865 (20 ºC) (ASTM D 1045)
Acid Index : Max. 0.08 mg KOH /g (ASTM D 1045)
Flash Point : Min. 205 (20 ºC) (OPEN POT)
Chemical Formula : C6H4(C8H17 O2 ) 2

USAGES

As soften material at plastic and PVC paste mixtures. At high layers of artificial leather and films, packing materials, hot coatings, cable isolation sheats, adhesives and etc.

ADVANTAGES

Does not cause chemical structure of the polymers, but provides the requested physical mechanical changes.
Causes all the polymeric materials easily and swiftly jelly.
Could be solved with all general solvents.
Extends the life of plastic by increasing the resistance to heat.
Could be mixed wtih all monopmers at soften of PVC.
Supplies lightening
Percel electrical resistance is seen.
Could not be extracte with water.
Increases the elasticty of the material.
At lacquer applications prevent cracking and increases the resistance.

More Less

About us

Company details

Constantly changing economical conditions and exponential competitive atmosphere have obliged a differential apprehension and philosophy in managements; and it has brought the fact of constant development.

Our company, being on this concious level, has begun working on "ISO-9002 Quality Assurance Certificate" at April 1997 and has been approved by NQA Company, the second biggest cooperation of the world in order to provide Total Quality Management and increase her power in competitive atmosphere.

Our production, manufactured with advanced technology, is analysed at Quality Assurance laboratories. We deliver after the Analyses Certificates are approved. Consequently, we service with Quality Assurance Certification.

As PLASTAY CHEMISTRY, our basic principle is to provide you, our precious customers, with QUALIFIED PRODUCT and QUALIFIED SERVICE with our technical employees and innovative, young, dynamic staff in order to meet your expectations of Quality Assurance, technical assistance, timely service. The service we provide has made Plastay Chemistry Industry Trade Limited Company a leading cooperation in her sector.

More Less