TSM Control Systems Ltd.

The Demesne , Dundalk, Co. Louth
Ireland

Telephone +353 42 9335560
Fax +353 42 9334422
info@tsm-controls.com

Trade fair hall

  • Hall 10 / J54
 Interactive Plan

Hall map

K 2016 hall map (Hall 10): stand J54

Fairground map

K 2016 fairground map: Hall 10

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.001  Mixers
  • 03.01.001.01  Mixers, continuous type, for solids

Mixers, continuous type, for solids

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.001  Mixers
  • 03.01.001.03  Mixers, batch type, for solids

Mixers, batch type, for solids

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Integrated automation
  • 03.07.001  Process control technique
  • 03.07.001.01  Control equipment
  • 03.07.001.01.04  Closed loop control equipment for tensile stress of film,sheet

Closed loop control equipment for tensile stress of film,sheet

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Integrated automation
  • 03.07.002  Material handling
  • 03.07.002.04  Conveyors (except factory trucks and carts)
  • 03.07.002.04.01  Pneumatic conveyors

Pneumatic conveyors

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Integrated automation
  • 03.07.002  Material handling
  • 03.07.002.05  Dosing and metering equipment
  • 03.07.002.05.02  Gravimetric dosing and metering equipment

Gravimetric dosing and metering equipment

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.09  Measuring and test equipment
  • 03.09.010  Precision weighing equipment

Precision weighing equipment

Our products

Product category: Gravimetric dosing and metering equipment

OPTIMIX 50

OPTI-MIX 50 Batch Blenders can accommodate up to four material components while providing
throughput rates up to 50 kg/hr (110lb/hr). OPTI-MIX 50 utilises patented TSM slide valve
design and patented reverse-flight auger mixing technology. This combination provides superior
accuracies, blend ratios and mixing homogeneity that is not achievable by competitive systems.
All components are blended by weight based on the preset blend ratios on the microprocessor
controller. Each component is metered separately into a single weigh hopper, which measures
and controls their rate.

More Less

Product category: Gravimetric dosing and metering equipment

OPTIMIX 150

OPTI-MIX 150 Batch Blender can accommodate up to four material components while providing
throughput rates up to 150 kg/hr (330lb/hr). OPTI-MIX 150 utilises patented TSM slide valve
design and patented reverse-flight auger mixing technology. This combination provides superior
accuracies, blend ratios and mixing homogeneity that is not achievable by competitive systems.
All components are blended by weight based on the preset blend ratios on the microprocessor
controller. Each component is metered separately into a single weigh hopper, which measures
and controls their rate.

More Less

Product category: Gravimetric dosing and metering equipment

OPTI BLEND

TSM’s OPTI-BLEND range of Continuous blending solutions offer total reliability, precision and
process control options ensuring material homogeneity and guaranteeing consistent product
quality. They provide continuous gravimetric and throughput control of up to seven components.
The OPTI-BLEND controls the blend percentages and can also maintain the extruder throughput
at a desired level, i.e. kg/hr control.

Haul off speed measurement can be added to ensure that the weight per length is controlled
to the desired specification (yield control). This ensures that the product being produced is
maintained at the desired thickness without operator intervention.This mode can be extended to weight per area control through entry, or automatic measurement of material.

The TSM OPTI-BLEND provides a “dosing” solution to gravimetric blending and extrusion control
for up to 7 components. The primary component is gravity fed directly to the extruder throat and the secondary (side fed materials) maintain recipe ratio via auger feeds.

More Less

Product category: Gravimetric dosing and metering equipment

OPTI EX

OPTI-EXT range of Extrusion Control applications represent TSM’s next generation blending
technology, providing superior accuracies, blend ratios and mixing homogeneity not achievable
by competitive systems. OPTI-EX blenders utilise the benefits of TSM’s patented technologies
in slide valve design and reverse flight auger mixing with continuous LIW measurement. TSM’s
extrusion control blenders combine in a unique way accurate gravimetric batch blending with
integrated extrusion control using LIW techniques. This results in exceptional, ultra fast throughput
measurement and control of the extrusion process. OPTI-EX range can accommodate up to
12 material components at throughputs up to 3000kg/hr(6600lbs/hr).

More Less

Product category: Gravimetric dosing and metering equipment

VACUUM RECIEVING

As material loading is an integral part of every production process, minimal disruption of material
flow with complete control is essential. TSM now offers a range of reliable and user-friendly
Vacuum Receivers to serve your material handling needs up to 115 ltrs.

More Less

About us

Company details

Boasting over 10,000 installations in 60 countries worldwide, TSM are recognized as specialists in blending and control systems. TSM manufacture specialist blending systems for the extrusion, injection moulding, blow moulding, pipe, sheet, fibre and recycling industry where we have the capability to process up to 100% Recycled Flake / Regrind. With TSM you are guaranteed customer satisfaction. TSM is a company focused on engineering excellence and a commitment to quality. As early as 1991 the company was accredited with the ISO 9001 quality standard, illustrating TSM's 32 year history of superior engineering and adherence to exceptional levels of production excellence. Our quality manufacturing, rugged designs and cost saving benefits ensure the customer gets a product built to last at a competitive price.

More Less

Company data

Number of employees

11 - 30

Foundation

1978

Area of business

Machinery and equipment for the plastics and rubber industries

Target groups

Plastic product manufacturing