Balers for RECYCLABLE
In this section fact sheets of balers suitable to treat secondary materials can be found
All MACPRESSE balers stand out thanks to their unique characteristics that make them powerful machines with very high productivity levels in different environments.
All balers have HARDOX liners (15mm or approximately 5/8” thick) both on the bottom and on the sides. These bolt-in liners are placed on top of a 15mm sub-floor. Sidewalls are also bolted on for easy wear plate replacement.
Designed for baling secondary materials, the MACPRESSE cutting system has no need for any flap or stamper as required by most of its competitors’ systems.The cutting system is particularly flexible and allows baling even difficult materials such as paper reel cores and very long plastic film (from agricultural greenhouses).
Horizontal binding has its advantages such as easy maintenance and cleaning, wires of different diameters both in plastic and metal. The binding unit can be made moveable so that difficult materials, such as wood chips or wet waste, can be baled.
MACPRESSE HYDRAULIC UNIT
Installation of Rexroth variable delivery pumps, adjusts the speed of the compacting ram and the cylinder thrust according to the materials to be baled.
The hydraulic unit delivers the best performance with the least possible energy consumption.
“SCART” CONNECTION PLUGS
Electrical connections for the fluffer , hopper and
wire tying unit use multi-pin quick disconnect
PANNELLO OPERATORE SIEMENS
SIEMENS INDUSTRIAL PC has a dual function.
Machine diagnostics and remote support
Ideal machine setting for each baled material and production reports
The diagnostic function allows monitoring of all machine parameters and any possible anomalies. For instance:in the event of failure of a hydraulic valve or safety limit switch, a photo of the faulty component will be displayed on the screen, together with its exact position on the machine to make the repair easier
SETTAGGI E REPORT
Per ogni tipo di materiale da imballare, vengono preimpostati i diversi parametri macchina, in modo tale che quando l’operatore, mediante l’apposito pulsante, cambia il tipo di materiale da imballare, la macchina si reimposta automaticamente.
The Siemens PC interfaces via modem with a remote diagnostic system, allows MACPRESSE engineers to check and, if necessary, alter some functions of the PC program such as operating pressures or other adjustments and monitor any hydraulic or mechanical faults.
The machines are certified and comply with international quality and safety standards.