SAM (Sung An Machinery Co., Ltd.)

33, Madogongdan-ro 6-gil, Mado-myeon, Hwaseong-si , 445-861 Gyeonggi-Do
Korea, Republic

Telephone +82 31 4919741
Fax +82 31 4919745
sales@sungan.net

Trade fair hall

  • Hall 4 / B15
 Interactive Plan

Hall map

K 2016 hall map (Hall 4): stand B15

Fairground map

K 2016 fairground map: Hall 4

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.02  Extrusion lines
  • 03.02.001.02.06  Extrusion lines for laminating and coating
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.04  Machinery and plant for finishing, decorating, printing and marking
  • 03.04.001  Printing equipment for plastic and rubber products

Printing equipment for plastic and rubber products

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.04  Machinery and plant for finishing, decorating, printing and marking
  • 03.04.005  Coating plant

Coating plant

Our products

Product category: Extrusion lines for laminating and coating

Extrusion and Laminator

Tandem Co-Extrusion Coating Machine

Web Width : 1,300mm

Max Speed : 350mpm

More Less

Product category: Extrusion lines for laminating and coating

Hot Stamping Foil Coater(Adhesive)

Hot Stamping Foil Coater (Adhesive)

Web Width : 1,650mm

Max Speed : 300mpm

More Less

Product category: Extrusion lines for laminating and coating

PVDC Coating Machine

PVDC Coating Machine

Web Width : 2,450mm

Max Speed : 250mpm

More Less

Product category: Extrusion lines for laminating and coating

Solution Coating

The applications for coating machines are endless. Whatever your coating requirement, SAM has the right machine for the job. If unable to offer a standard machine, SAM will design and build one to meet your most demanding specification. SAM also manufactures “Multi Purpose” test coating machines to enable our clients to develop their own products and carry out “in house” research and development.

If you are thinking of coating……think of SAM.

**Pressure / Thermal Sensitive Tapes
- Adhesive Tapes (Single / Double Side)
- Release Coater (Silicon)
- Marking Tapes
- Holograms
- Hot Stamping Tapes
- Lid Tapes
- Hot Melts

**Optic Materials
- Window Film
- Prism / Diffusion Films
- Polarizing Film

**Electronics
- OPV Coater (Solar Cell)
- RFID Coater (Antenna Chip)
- Battery Coater
- Multi Layers Condenser Line

**Pharmaceutical
- PTP Coater

**High Barrier (PVDC) Film Coater

**Water Purification Filter Coater

**Al-Fin Coater (Air Conditioner)

**Multi Purposes Pilot Coater (R&D)

More Less

Product category: Extrusion lines for laminating and coating

Silicon Coater

Silicon Coater

Web Width : 1,620mm

Max Speed : 400mpm

More Less

Product category: Extrusion lines for laminating and coating

Solvent Base Laminator

Solvent Base Laminator

More Less

Product category: Extrusion lines for laminating and coating

Extrusion Coating and Laminator

Whether your machine requirements are sustainable products with high barrier pouches, aseptic packaging, or PET on board, SAM will provide you the highest quality and cost effective solution. As your customer’s product requirements change, SAM delivers extrusion lines over 3 M wide and production speeds over 600 MPM.

SAM will provide a solution and configure a new or up-graded machine to meet your current and future needs. For extrusion coating machinery, the best option is SAM with our “leading edge” technology.

**Product Ranges
- Flexible Packages : Plastic Films / Paper / Al-Foil
- Board Papers : Aseptic Packages / Cup Stocks / Milk Cartons
- Woven / Non-Woven Materials

**Extrusion Systems
- PE, PP, Acid Copolymers
- Mono / Co-Ex / Triple Extrusion

**Line Configurations
- Single Extrusion Coating & Lamination (2~3 layers)
- Single Co-Extrusion Coating & Lamination (2~5 layers)
- Tandem Extrusion Coating & Lamination (2~7 layers)
- Triple Extrusion Coating & Lamination (2~7 layers)

More Less

Product category: Extrusion lines for laminating and coating

Hi Ex Co-Extruder

§Feed Cylinder

-Heavy Duty Ductile Cast Iron

-Jacketed wall with Pre-Piped Cooling

-Replaceable Screw Shaft Seal

§Barrel

-Bimetal Inlay (Rated 10,000psi)

-Precisely Honed

-Pressure Transducer Prior to Screen Pack

-Safety Rupture Disc (Rated 7,500psi)

§IR Heater

-Shorten heat up time (120min to 30min)

-Less continuous power consumption

-Less building heat load

§Direct Drive Torque Motor

-No gear box, elimination of gear losses

-Permanent excited synchronous motor

-Direct drive motor has better efficiency

in low load than in nominal load

(Cu losses dominating)

§Base

-Heavy Duty Construction

-Thermal Expansion Absorption

More Less

Product category: Extrusion lines for laminating and coating

Integrated Cart System

+Trolley System +

§Trolley Side frames

§Ink Tray with Double Profile Inking Bar

§Pneumatic pump and Commercial pump /Or Dedicated 40 liter stainless tank

§Print cylinder

§Splash guards

More Less

Product category: Extrusion lines for laminating and coating

Gravure Printing Press

SAM’s new generation of rotogravure machines operating at speeds over 500 meters per minute and offer features that benefit the printer that are unsurpassed in the market.

Quick make ready, through automation of set up procedures, innovative inking systems, register pre-alignment, and the most advanced drive and control systems available, ensure start-up waste is minimal with the highest print quality and lowest cost of production.

 

**Product Ranges
- Flexible Package Printing

- Alu-foil Printing  

- Board Paper Printing  

- Decorative / Wood Grain Printing

 

 

**In-line Lacquer Coating  

- Over Lacquer  

- Cold / Heat Seal Lacquer  

- Anti-fog / Catalytic Lacquer  

 

**In-line Lamination  

- Solvent Based Adhesive Lamination  

- Water Based Lamination  

- Solventless Adhesive Lamination

 

 

**Straight / Double Side / Split Configuration

More Less

Product category: Extrusion lines for laminating and coating

Sprinter 350C

Quick change over

Integrated trolley (Cylinder / inking system)

Sleeve impression

Energy efficient dryer

HMI system for data equisition

Print register Pre-set

Electric Line Drive

Perfect ink splash guard

More Less

Product category: Extrusion lines for laminating and coating

Extrusion Coating and Laminating

Whether your machine requirements are sustainable products with high barrier pouches, aseptic packaging, or PET on board, SAM will provide you the highest quality and cost effective solution. As your customer’s product requirements change, SAM delivers extrusion lines over 3 M wide and production speeds over 600 MPM.

SAM will provide a solution and configure a new or up-graded machine to meet your current and future needs. For extrusion coating machinery, the best option is SAM with our “leading edge” technology.

**Product Ranges
- Flexible Packages : Plastic Films / Paper / Al-Foil
- Board Papers : Aseptic Packages / Cup Stocks / Milk Cartons
- Woven / Non-Woven Materials

**Extrusion Systems
- PE, PP, Acid Copolymers
- Mono / Co-Ex / Triple Extrusion

**Line Configurations
- Single Extrusion Coating & Lamination (2~3 layers)
- Single Co-Extrusion Coating & Lamination (2~5 layers)
- Tandem Extrusion Coating & Lamination (2~7 layers)
- Triple Extrusion Coating & Lamination (2~7 layers)

More Less

Product category: Extrusion lines for laminating and coating

Extrusion and Laminator

Tandem Co-Extrusuion Coating Machine

Web Width : 1,650mm

Max Speed : 500mpm

More Less

Product category: Extrusion lines for laminating and coating

Feedscrews

Proprietary feedscrew designs for high output conventional extrusion coating and laminating applications or specialty designs for your unique process. High shear high temperature mixing screws commonly designed for low viscosity extrusion coating polymers and temperatures. Low shear barrier designs proven in applications from low temperature heat seal coatings to high oxygen barrier and tie layers to biopolymers. With over 50 years of practical extrusion process design experience and field data correlated CFD modeling our proven designs work for you.

Screw & Barrel Replacement

Application Specific Redesign

Barrel Heater & Heat Control Retrofits

Complete Temperature Control Supervisory Control Systems

Co-extrusion Retrofits

Edge Encapsulation Retrofits

XYZ Extruder Carriages

More Less

About us

Company details

SAM (Sung An Machinery Co., Ltd) headquartered in South Korea manufactures Solution Coating, Extrusion & Laminating, Gravure Printing Machines. SAM has delivered over 600 machines to customers in 26 countries. Our success is a result of 100% commitment to our customer’s needs and a willingness to work in partnership to exceed the desired results. We boast an enviable client list of industry leaders bearing testimony to our long term relationships and the success of our projects.

Service Network: SAM is fully aware of the production demands placed on its machines and the need to maintain their efficient operation. Our skilled technical personnel are always on call 24/7 to support your needs.

The SAM Group is comprised of our main plant in South Korea, SAM NORTH AMERICA LLC, SAM EUROPE Srl, SPEL (SUNGAN Printed Electronics Laboratory), and NCT (New Control Technology). For more information on the SAM Group and its products, please contact us : sales@sungan.net | www.sungan.net

More Less