29, Sokolova, 344006 Rostov-on-Don
Russian Federation

Telephone +7 863 2618888
Fax +7 863 2618818

Trade fair hall

  • Hall 16 / D03
 Interactive Plan

Hall map

K 2016 hall map (Hall 16): stand D03

Fairground map

K 2016 fairground map: Hall 16

Our range of products

Product categories

  • 01  Raw materials, auxiliaries
  • 01.11  Fillers
  • 01.11.006  Calcium carbonate

Calcium carbonate

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.010  Recycling plants
  •  Recycling plants for sorted waste

Recycling plants for sorted waste

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  •  Extrusion lines
  •  Extrusion lines for blown film

Our products

Product category: Extrusion lines for blown film

Multilayer blown film lines ALEKO

Aleko’s universal extrusion lines for the production of five-layer and three-layer polyethylene film feature cutting-edge technical solutions in the area of polymer film production, such as the engineering advancements developed by Plamex, Germany. In the design of lines we used a modular type for assembly. It makes it easy to configure the machine for specific client needs. All series of extruders Aleko are completed with high-performance screws.  

Screws have a complex geometric shape which allows to achieve high performance and efficiency of mixing. They work well on mixtures with linear Polythylene, including MLLDPE, PA, EVA as well as with recycled material (up to 100%).

This allows to produce high quality film following applications:

Lamination film
Shrink film
Film for freezing

Milk film
Packaging film
Barrier film
Waterproof film

Stretch hood


Possible effective width
Possible screw configuration and capacity
up to 210 kg/h
up to 250 kg/h
up to 320 kg/h
Up to 370 kg/h
Up to 480 kg/h
Up to 540 kg/h

More Less

Product category: Extrusion lines for blown film

АВА blown film lines ALEKO

Film blown lines Aleko ABA type for 3 layers HDPE film

This line allows to produce films with adding into middle layer high amount of CaCO3 fillers or recycled material. Comparing to monolayer Extrusion lines, Aleko ABA type features following advantages:

-          Production cost reduction by introduction into the middle layer (B) up to 100% of the recycled material or up to 70% of  CaCo3 additives.

-          Excellent resalable condition as the outer layers (A) are made of the raw material and cover the middle layer.

-          Improved mechanical properties beside mono-layer analogs (increased mechanical  properties of 3 layer film in comparison with a single layer film made from the same material)

-          Modular design of extrusion lines, each machine is produced in reliance on our customers’ needs (layers ratio, percentage of recycled material and CaCO3, film widths and thickness).

Possible effective width
Possible screw configuration and capacity
HDPE – up to 100 kg/h
HDPE – up to 155 kg/h

LDPE – up to 200 kg/h
LDPE – up to 300 kg/h
Layers ratio
 Up to 1/8/1

Layer “A” – 20%

Layer “B” – 80%

More Less

Product category: Extrusion lines for blown film

Monolayer blown film lines ALEKO

Monolayer blown film lines ALEKO

The range of monolayer lines includes 3 series of machines:

1)      Aleko Mini (width 600/800 mm)

2)      Aleko Midi (1100/1300 mm)

3)      Aleko Maxi (width 1500/1700/2100 mm)

These models are high-speed lines for the manufacturing of polyethylene film (HD/LD/MD/MLLD) such as: heat-shrink, hothouse film, pallet film, agricultural film, “pre-packaging,” “T-shirt”,”Garbage bags” and more. The resulting film meets the highest standards of polymer film used in the production of a broad range of packaging.

These extrusion lines have been developed and created by the design department of Aleko Extrusion Technology, part of Aleko Group and the German engineering company Plamex.


• Stable operation under the production of ultra-fine film starting at 20 mcm using domestically-produced LDPE and from 5 mcm on HDPE thanks to increased screw L/D ratio: 1/32;
• Screw construction has been specially developed and is ideally suited to working with complicated mixtures;

• Thickness tolerance up to +/- 7%!

Possible effective width
Aleko Maxi
Aleko Midi
Aleko Mini
Screw diameter and capacity
LDPE – up to 80 kg/h

HDPE – up to 65 kg/h
LDPE – up to 120 kg/h

HDPE – up to 80 kg/h
LDPE – up to 180 kg/h
LDPE – up to 250 kg/h

More Less

Product category: Extrusion lines for blown film

Bagmaking machines Aleko

Aleko Bagmaking machines are special design devices for production of specific bags such as:


“Bottle type” neck bag
“L-type” neck bag

“U-type” neck bag

Double sealing bottom bag

Which are suitable for production of PE Inners and protective covering for PP Big Bags.

These machines can boast high sealing capacity of up to 150 mcm per one layer as well as high production speed of up to 21 pcs/min. Together with the maximum width of 2000 mm and length of 5000 mm and reasonable price, this makes these bagmaking machines a unique offer on the market.


Фото из каталога (реальное фото вкладыша + чертёж из каталога)

More Less

Product category: Extrusion lines for blown film

Volumetric Dosing systems Aleko

Volumetric dosing systems are designed for automatic proportional feeding of raw materials such as HDPE, LDPE, regrind, masterbatch, additives.Up to four components can be added into main volume of raw material.

Aleko dosing systems can boast the following technical features:

- Installation of hopper magnets to avoid machine screw damage

- Saving up to 50 formulas

- Simple and safe design

- High dosing accuracy level

- Inclining screw

- Main material hopper with flat inner surface

- Step motor

- Simple control cabinet with LCD touch screen monitor 4.3”

- User-friendly interface

- Rotating speed can be automatically adjusted according to extruder processing speed

- Installation up to 4 storage hoppers

More Less

About us

Company details


Aleko Group was founded in 1992 and is an undeniable leader in manufacture of equipment for polymer films extrusion in the territory of Russia and CIS countries.

Since 1996, the company has been mastering new types of manufactured equipment. Aleko machines are operated in many regions and countries. The company supplied extruders to Siberia, Far East, Central and Southern regions of Russia, to Volga region and Urals, to Ukraine, Belarus, Kazakhstan, Turkmenistan, Czech Republic and other countries.

In 2009, a new engineering and production unit Aleko Extrusion Technology was commissioned. Aleko Group implements the project of creating conceptually new, state-of-the-art production of extrusion lines on the basis of many-years experience and using technologies of its European partners.

Aleko Group continues to hold its leading positions today as well. Our unquestionable advantages are: the possibility of purchasing main models of equipment directly "from the warehouse", a large stock of spare parts, experienced specialists, trust-based relationships with our clients, and prompt and high-quality service.

More Less