03 Machinery and equipment for the plastics and rubber industries
03.04 Machinery and plant for finishing, decorating, printing and marking
03.04.005 Coating plant
Product category: Laminating plant
AHV-S Laboratory Press
20 tons laboratory heating or molding press Hydraulic pressure generation Heating plates up to 400 °C Adaptor for molding and forming tools
Manual loading of blanks Manual removal of stamped parts Activating of pressing process by two-hand actuation Option: Retrofitting for automatic operation with freely adjustable motion profile for ventilation stroke.
Press support in solid steel welded construction, designed for upright operation Framework with rollers for mobile use Lifting height adjustable via position measuringsystem Cylinder pressing from below Forming pressure max. 200 kN at 315 bar, hydraulic generation of press capacity Hydraulic pump integrated in machine support
Temperature for top heating plate 0 - 400 C Temperature for bottom heating plate 0 - 400 C Temperature accuracy 5 C across heating surface (except for approx. 25 mm around the edge) Responsivity of controller 1 C Plane parallelism of heating plates 0.2 mm/m Time control 0.15 – 1.000 sec, in 6 time zones Pre-selection of closing, pressing and opening speeds Pre-selection of surface pressure at Touch panel Pre-selection of respective blank size at Touch panel Automatic pressure generation for pre-selected surface pressure and blank
The switch cabinet with operators key pad (Touch panel with SPS) is ergonomically hinged mounted below the line's press unit and contains all electric operational elements, as well as operating and display elements and tool temperatures. The switch cabinet may be retracted by means of gas pressure spring to avoid unintentional operation or for transport.Designed according to VDE regulations
Main voltage 400 V Control voltage 24 V Frequency 50 Hz
The line is designed for manual operation Pressing process is effected via two-hand switch At three sides protected with Lexan covers Operator-sided with safety bellow Option: Retrofitting of a light curtain for automatic operation
Loading and transporting system Moulding tool mounting Alternative: Cold moulding press, withoutheating plates
Hot-Stamping presses are heating presses in general used for profiling, forming, cutting and clicking heat moldable foams with the help of special tools. Typical applications are engine noise absorbers or seat covers. But also automotive textiles can be modified with an interesting optic.
Meyer offers a complete range of different press concepts. Plate size, stroke and press force depend on the project. Meyer also offers solutions for a production with sheets but also “from roll to roll”.
For a special offer for you please do not hesitate to contact us.
MEYER Flatbed-Laminator-Systems are double belt presses with integrated contact heating and cooling. The materials that are laminated are heated very gentle. Due to the long heating zone the materials are laminated perfectly with high bonding strength. Right after the heating the materials can be pressed together or calibrated to a set thickness with the pressure rollers. To stabilize this compound the materials a cooled down before they exit the double belt press. With the flat gap between the belts and the precise height adjustment even rigid plates with a thickness of up to 150mm can be laminated.
Heating time = production speed Temperature in heating zone Pressure of pressure rollers Gap of pressure rollers (level adjustment) Height adjustment = gap between belts Temperature in cooling zone
Adhesive Normally thermoplastic adhesives are used when using a Meyer flatbed laminating machine. These adhesives are environmentally friendly, easy to handle and there are special adhesive types for nearly all applications. Also the requirements for recycling, sort purity, fogging, environment and health care are easily achieved with thermoplastic adhesives. Depending on the application and the requirements also other adhesive systems, like reactive adhesives can be easily combined with Meyer flatbed laminators.
Since the company MEYER was founded in 1949, we have been one of the most important manufacturers of special machines for bonding, coating, pressing and molding. This is also expressed by our slogan: Ideas that bond.
For several decades, Meyer produces innovative machinery such as fusing machines, heating presses, laminating lines and also large molding lines. Our satisfied customers all over the world are taken by our thorough knowledge and our innovative solutions.
Highest quality and delivery reliability are guaranteed with motivated employees as well as by using most modern machines for a high production depth and development tools such as 3D-CAD, CAM, E-CAD and ERP system.
Being a family business led nowadays by the third generation, flexibility is of course an important factor. We are gladly prepared to fulfill our customers' individual demands and requirements.