MSA Engineering Systems Limited

3 Assured Drive, Thurmaston , LE4 8BB Leicester
United Kingdom

Telephone +44 116 2608866
Fax +44 116 2608861
sales@msa-engineering.co.uk

Trade fair hall

  • Hall 12 / D35
 Interactive Plan

Hall map

K 2016 hall map (Hall 12): stand D35

Fairground map

K 2016 fairground map: Hall 12

Contact

Morgan Jones

Executive board/managing director
Marketing, sales, advertising, PR

3 Assured Drive, Thurmaston
LE4 8BB Leicester, United Kingdom

Phone
+44 116 2608866

Fax
+44 116 2608861

Email
morganjones@msa-engineering.co.uk

Our products

Product category: Winding equipment

HWL 225T Twin Spindle Horizontal Electrofusion Wire Laying Machines

The HWL 225T is a horizontal format, 3-axis, twin spindle, SIEMENS CNC controlled electrofusion wire laying machine. Designed for the wire laying of small to medium fittings or pipe sections.

The machine can produce fittings typically in the range of 20 to 225mm internal diameter, and features two vertically mounted spindles. In addition electrofusion pads up to 300mm x 300mm can be produced on the bottom spindle.

More Less

Product category: Winding equipment

VWL 400 Vertical Electrofusion Wire Laying Machine

The VWL 400 is a vertical format, 3-axis, CNC controlled electrofusion wire laying machine, designed for the wire laying of medium to large fittings or pipe sections.

The VWL 400 can produce fittings typically in the range of 125 to 560mm internal diameter.

Optional 2-axis CNC Drilling Unit available for drilling fusion indicators and/or terminal holes.

More Less

Product category: Winding equipment

VWL 710 Vertical Electrofusion Wire Laying Machine

The VWL 710 is a vertical format, 3-axis, CNC controlled electrofusion wire laying machine, designed for the wire laying of medium to large fittings or pipe sections.

The VWL 710 can produce fittings typically in the range of 125 to 900mm internal diameter.

Optional 2-axis CNC Drilling Unit available for drilling fusion indicators during wire laying cycle, or for drilling terminal holes during external profiling cycle.

Lift assist equipment available for handling large/heavy components.

More Less

Product category: Winding equipment

VWL 1200 Vertical Electrofusion Wire Laying Machine

The VWL 1200 is a vertical format, 3-axis, CNC controlled electrofusion wire laying machine, designed for the wire laying of medium to large fittings or pipe sections.

The machine can produce fittings typically in the range of 125 to 1200mm internal diameter (1400mm SDR17).

Optional 2-axis CNC Drilling Unit available for drilling fusion indicators during wire laying cycle, or for drilling terminal holes during external profiling cycle.

Patented tooling and wire laying process for the manufacture of electrofusion fittings.

Lift assist equipment available for handling large/heavy components.

More Less

Product category: Winding equipment

SWL Electrofusion Saddle Wire Laying Machine

The SWL (saddle wire laying) is an horizontal format, 5-axis, CNC controlled electrofusion wire laying machine. Designed for machining and wire laying the curved profile of electrofusion saddle fittings.

Patented tooling and wire laying process for the manufacture of electrofusion saddle fittings.

More Less

Product category: Winding equipment

HWL 280S Long Bed Horizontal Electrofusion Wire Laying Machine

The HWL 280S is a horizontal format, 3-axis, single spindle, SIEMENS CNC controlled electrofusion wire laying machine.  Designed for the wire laying of extra long fittings or pipe sections.

The machine is suitable for producing fittings up to a typical internal diameter of 280mm, maximum 1.2 meters long. An additional 2-axis drill unit is available which is particularly useful for drilling terminal holes and/or fusion indicators.

Patented tooling and wire laying process for the manufacture of electrofusion fittings.

More Less

Product category: Winding equipment

EWL Single Spindle Horizontal Electrofusion Wire Laying Machines

The new 'EWL' type  is a horizontal format, 3-axis, single spindle, CNC controlled electrofusion wire laying machine. Designed primarily for the wire laying of pads/heating elements as used in electrofusion saddle type fittings. In addition, it is capable of wire laying small to medium electrofusion fittings or pipe sections.

Different machine capacities can be offered as follows

Pad sizes up to approximately 300mm x 300mm and fittings in the range 20 to 225mm internal diameter.
Pad sizes up to approximately 136mm x 136mm and fittings in the range 20 to 125mm internal diameter.

Patented tooling and wire laying process for the manufacture of electrofusion fittings.

The enclosed leaflet shows a similar specification (with capacities altered)

More Less

Product category: Winding equipment

NEXUS LT Series Electrofusion Control Units

A welding/jointing system suitable for use with all thermoplastic pipes and fittings as used by the water, gas, communication and chemical industries.

The NEXUS 500-LT electrofusion control units are a NEW development of lightweight units.  Utilising special transformer technology, the lightweight ‘LT’ units are still able to function with smaller generator sets (typically 3.5kW/4.4kVA).  Having superior performance and reliability, they generate approximately 20% less heat from the transformer on a 220V unit, and approximately 35% less on a 110V unit.  The 110V unit weighs only 17.8Kg, with the 220V unit weighing19.3Kg (including the 3m input and 3m output leads).

We can also offer a full range of accessories and tooling required for the electrofusion welding process.  Please contact our sales office for further details.

The NEXUS 500-LTX is a NEW variation of the ‘LT’ unit, with an extra long duty cycle to cater for large diameter electrofusion couplers entering the market with output voltages up to 48V. MSA have been at the forefront of developing wire laying systems and large coupler designs up to 1400mm so have superior knowledge over their welding characteristics.

More Less

About us

Company details

MSA have been at the forefront in the development of systems and production equipment for the manufacture of electrofusion fittings using our patented wire laying process. We currently offer standard production equipment for the manufacture or fittings ranging from 20 to 1400mm, with our system presenting a much simpler and more efficient alternative to the traditional method of inserting wire coils during the initial moulding stage of producing fittings.

MSA also manufacture the NEXUS range of electrofusion control units (ECU's), a welding system suitable for use with all polyethylene pipes and fittings as used by the water, gas, communication and chemical industries.

MSA Engineering Systems Limited was established in 1991 as a research and development group providing specialist design and manufacturing expertise for niche market industrial products and processes.

Since that time, MSA has gained an international reputation and continues to successfully develop and acquire specialist products and systems for an expanding portfolio of industrial markets. In recognition MSA were awarded with the 'Queens Award for Innovation 2006'.

In addition to developing and manufacturing it's own products, MSA's facilities and expertise are available for the production of bespoke solutions in related industrial applications.

More Less

Company data

Export content

> 75%

Number of employees

11 - 30

Foundation

1991

Area of business

Machinery and equipment for the plastics and rubber industries

Target groups

Plastic product manufacturing