Woywod Kunststoffmaschinen GmbH & Co. Vertriebs-KG

Bahnhofstr. 110 , 82166 Gräfelfing
Germany

Telephone +49 89 85480-0
Fax +49 89 8541336
woywod@plasticolor.de

Trade fair hall

  • Hall 10 / B75
 Interactive Plan

Hall map

K 2016 hall map (Hall 10): stand B75

Fairground map

K 2016 fairground map: Hall 10

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Integrated automation
  • 03.07.002  Material handling
  • 03.07.002.03  Driers for bulk materials

Driers for bulk materials

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Integrated automation
  • 03.07.002  Material handling
  • 03.07.002.04  Conveyors (except factory trucks and carts)
  • 03.07.002.04.01  Pneumatic conveyors

Pneumatic conveyors

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Integrated automation
  • 03.07.002  Material handling
  • 03.07.002.05  Dosing and metering equipment
  • 03.07.002.05.01  Volumetric dosing and metering equipment
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Integrated automation
  • 03.07.002  Material handling
  • 03.07.002.05  Dosing and metering equipment
  • 03.07.002.05.02  Gravimetric dosing and metering equipment

Gravimetric dosing and metering equipment

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.08  Ancillary equipment
  • 03.08.003  Metal separators

Metal separators

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.08  Ancillary equipment
  • 03.08.010  Electrostatic systems

Electrostatic systems

Our products

Product category: Volumetric dosing and metering equipment

PLASTICOLOR Dosing Units

We offer PLASTICOLOR dosing units which are designed and used for the dosing of granular, free flowing materials, such as masterbatch, regrind materials, virgin materials and PVC dry blends. The fields of application cover all extrusion, blow-moulding and injection moulding manufacturing processes.
The PLASTICOLOR modular system has five dosing unit sizes with a performance between 70 g/h and 6,600 kg/h. Dosing units can be used as individual dosing units, but can also be used in

- Colour change systems
- Dosing systems
- Volumetric mixing stations
- Gravimetric mixing stations

More Less

Product category: Volumetric dosing and metering equipment

PLASTICOLOR Colour Change Systems

Changing colours by a flip of the switch: this feature is provided by using 2 or more PLASTICOLOR units. Standard colour change systems consist of 2 to 8 PLASTICOLOR units, mounted at a common neckpiece. Special colour change systems for more than 8 components can be designed and supplied.
Benefits of colour change systems:

Immediate colour change during production
Simple handling and operation
No more excess of pre-mixed material
Avoiding scrap production and waste

More Less

Product category: Volumetric dosing and metering equipment

PLASTICOLOR Volumetric Mixing Stations

In a PLASTICOLOR mixing station every individual component including the main material is dosed by a PLASTICOLOR unit.
Standard mixing stations consist of 2 to 8 PLASTICOLOR units. Special mixing stations for more than 8 components can be designed and supplied. The modular design of the systems facilitates the easy and inexpensive extension of existing mixing stations or conversion from volumetric into gravimetric operation.

More Less

Product category: Gravimetric dosing and metering equipment

PLASTICOLOR Gravimetric dosing units and mixing stations

PLASTICOLOR gravimetric dosing units and mixing stations work according to the “loss-in-weight” principle. The weight of each individual material component is recorded by an integrated electronic load cell. Each component is permanently and simultaneously controlled according to the required portion in % of the total mix. This system is much more accurate than systems in which the single components are dosed one after another and only the total quantity is weighed (= gain-in-weight systems).

More Less

Product category: Pneumatic conveyors

PLASTICOLOR Hopper loaders

More Less

Product category: Driers for bulk materials

PLASTICOLOR Drying Systems

PLASTICOLOR Desiccant drying system IDT
Desiccant-type systems work according to the absorption principle, i. e. closed-loop heating and dehumidification by a chamber containing drying agent.

PLASTICOLOR Hot air system IHT
IHT series dryers make use of environmental air. Hence, the drying result depends on the environmental conditions (relative air humidity and temperature). Hot air systems are mainly used for pre-heating or drying non-hygroscopic materials.

More Less

About us

Company details

Since more than 30 years the company of Woywod Kunststoffmaschinen GmbH & Co. Vertriebs-KG is producing and marketing the PLASTICOLOR range of products for the plastic processing industry.

The brand name PLASTICOLOR stands for precision, long lasting products, efficiency and an extremely good cost-benefit ratio.

Due to the rapid growing plastic processing industry also the PLASTICOLOR products grew from individual manufacturing to a large-scale serial production.

In the early days PLASTICOLOR single dosing units and colour changed systems were produced. The next step was the introduction of Volumetric Mixing Station and thereafter followed by the Gravimetric Mixing Stations. In order to complete the range of products also Hopper Loaders as well as Drying Systems (Dry Air and Desiccant Dryers) were added.

PLASTICOLOR equipment is being used by a number of machine manufacturers of high quality extrusion lines for the international market. Their decision was based on the facts:

the long term experience in the plastic processing industry
the modular system of the PLASTICOLOR equipment both mechanically and electronically
the individual and solution oriented construction of the equipment, based on the consequent In-House development and production.

The PLASTICOLOR group of companies is consisting of Woywod Kunststoffmaschinen GmbH & Co. Vertriebs-KG based in Graefelfing (near Munich) and with the production situated in Seefeld (near Berlin), as well as the company of M+E Maschinen und Elektronik GmbH + Co. Entwicklungs-KG.

By a large number of agents, representatives and wholesalers the PLASTICOLOR range of products is offered, sold and serviced worldwide.

The strength of the future is and will always be innovative thinking and acting, as well as technical development for practicable solutions.

 - PLASTICOLOR -

More Less

Company data

Foundation

1971

Target groups

Machinery construction