Reinert-Ritz GmbH

Ernst-Heinkel-Str. 2 , 48531 Nordhorn
Germany

Telephone +49 5921 8347-0
Fax +49 5921 8347-25
kontakt@reinert-ritz.de

Trade fair hall

  • Hall 7a / B16
 Interactive Plan

Hall map

K 2016 hall map (Hall 7a): stand B16

Fairground map

K 2016 fairground map: Hall 7a

Our range of products

Product categories

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.03  Supplying
  • 02.03.001  Plastics products and parts for plant building
  • 02  Semi-finished products,parts and reinforced plastics
  • 02.03  Supplying
  • 02.03.003  Plastics products and parts for building applications
  • 02  Semi-finished products,parts and reinforced plastics
  • 02.04  Product groups
  • 02.04.001  Semi finished products
  • 02.04.001.05  Semi finished products of polyethylene (PE)
  • 02  Semi-finished products,parts and reinforced plastics
  • 02.04  Product groups
  • 02.04.001  Semi finished products
  • 02.04.001.07  Semi finished products of polypropylene (PP)

Semi finished products of polypropylene (PP)

Our products

Product category: Plastics products and parts for plant building

Transition of materials construction

Flexibility and Diversity
All customer requirements can be reliably with our broad portfolio
of fittings, together with the possibility of creating special
assemblies in conjunction with our first class welding workshop.

Machining
On the basis of our hollow bars and solid rods, extruded in-house,
fittings up to d2000mm are machined in our own turning and
milling workshops. Thereby we guarantee a high level of efficiency
and quality assurance from the beginning.

Special construction
Highly trained, and regularly examined, professional personnel
with years of welding experience weld our fittings up to a diameter of
2000mm in the welding workshop.

More Less

Product category: Plastics products and parts for building applications

Quick Pig

Compact
The alternative to large and expensive concrete construction
shafts, our new innovative QUICK-PIG pigging station.
Due to the compact construction, the QUICK-PIG station can be installed
under a commercially available manhole cover, close at hand to the
pipelines and cables.

Quick
With our new QUICK-PIG station, the necessity to check for gas and
potential pumping dry the shaft disappears. The operation of the
station is simple and functional. The cover of the station is opened, the
unit with the bayonet connection is removed, a commercially available
pig is placed in the holder and the unit including the pig is placed back
into the station. Finally, turn the bayonet connection and the pig is in
the launch position.

Cost-saving
Due to the innovative and compact method of construction, the
procurement and installation costs are less than the usual maintenance
shafts. The uncomplicated application in daily maintenance
activities reduce the consequential costs to a minimum

Individual & Adaptable
The QUICK-PIG station can be adapted for every pig and pipe
diameter, as also can the depth of installation. The branch of the
station can be provided with various options; long spigot ends, push
fit couplers or flange connectors. We are ready to advise you on all
possibilities.

Video about our Quick Pig Station
https://www.youtube.com/watch?v=pMjLkcfAD5U&feature=youtu.be

More Less

Product category: Plastics products and parts for building applications

Safe flange connections up to 25 bar

HP Flanges – Guaranteed leakproof
fully pressure resistant flange connection in all dimensions
loadable up to 25 bar
extra secure due to patented, coordinated construction of flange and PE stub end
DVGW approved for gas and water
optional: including profile sealing gasket

Reduced flange – Trouble-free connection to valves
Our reduced flanges allow the connection of PE pipes
to steel or cast iron valves without changing the nominal diameter.
This reduces the total cost.

A connection without offset:

improves the flow characteristics,
reduces deposits
allows pigging
use of butterfly valves

Minimize costs
Due to the reduced nominal diameter of the flange, the project costs are minimized.
For example, you can use a reduced flange DN 300 and also valves DN 300 in a
d 355 mm PE pipe system. In addition to the technical advantages of the
reduced flange, you also have a financial advantage: You save about 45% of the total cost.

Advantages of our reduced flanges:

Cost savings
high security
streamlined

Stub ends
Stub ends with backing rings are one of many connection options from our portfolio.
For low pressure systems, it is usually sufficient to use conventional cheap
stub ends with short welding ends (according to DVS 2210-1 part 2.1 annex 3).
This stub ends with its long welding ends are ideal for different types of connections:
for butt welding, for the use of electrofusion sockets or for push-fit connections.
moveable valve discs

More Less

Product category: Plastics products and parts for building applications

Transition of materials

Reinert-Ritz has a wide range of transition pieces in the program to connect
from other pipe materials to PE pressure pipes. On the following pages you
will find the possibilities our program offers.

Steel
PVC
Cast/Ductile iron
Concrete
Stoneware
GRP

You still didn`t find a transition for your pipeline?

We provide you with reliable joining sockets for a
variety of materials and dimensions.

Please contact us. We will be pleased to support you.

More Less

Product category: Plastics products and parts for building applications

Branches: T-pieces, branches and y-fittings up DN 2000

More Less

Product category: Plastics products and parts for building applications

REINOGRIP - The tensile push-fit connection (DVGW and WRAS)

When the drinking water suppliers requested a simple and secure
connection for PE pressure pipe systems about 20 years ago, we
started to develop our REINOGRIP fittings. Today we offer our
customers an extensive push-fit program in different dimensions.
From the double coupler and various fittings for hydrants to service
line contributors, our REINOGRIP portfolio covers almost every relevant
connection for water suppliers. Our REINOGRIP products are
characterized by high reliability and full pressure resistance. This is also
confirmed by the German Technical and Scientific Association for Gas
and Water (DVGW).

Simply plugged in
in all weather conditions
with residual water in the line
80% faster than
electrofusion couplers
secure laying of pressure lines
without welder training
wide selection of -ttings

 Securely connected
from d 90 to 225 the only single
plug-in connection with
DVGW approval
for 16 bar operating pressure
no corrosion
longitudinal force-locking even
without operating pressure
test passed: internal pressure
creeping test 1000 hours
with 24.8 bar
test passed: bending test
with 30.4 bar

More Less

Product category: Plastics products and parts for building applications

Machining products from PE100, PE100-RC, PE100-RT, PP-R, PP-RCT, PP-B and PB

More Less

Product category: Semi finished products of polyethylene (PE)

PE100 / PE-HD solid rods in pipe quality

More Less

Product category: Semi finished products of polyethylene (PE)

Semi finished produts from PE100, PE100-Rc, PE100-RT, PE1000 and PB

More Less

Product category: Semi finished products of polyethylene (PE)

PE100 / PE-HD hollow bars in pipe quality

The production of hollow bars and solid rods from polyethylene (PE) and polypropylene (PP)
is our specialty. At this time, we extrude the hollow bars and solid rods up to
maximum outside diameters of higher than 1850 mm and 1200 mm respectively.
Our stock includes semi-finished products of various dimensions in pipe quality.
If your desired dimension is not in stock, we produce suitable hollow bars and solid rods in PE black or PP gray
for orders of minimum. Other materials, for example polybutene (PB),
and special colours are also available for orders of appropriate amounts, please contact us.

Standard dimensions:
da 35-1850 mmm
di 15-1350 mm
more than 200 different
dimensions available

Colours:
PE 100 black

Available length:
standard length 2000 mm
cut lengths, special dimensions and
colours available on request

For the manufacturing of:
valves, butterfly valves, nozzles, unions, jointing elements,
compensators, sleeves, cylinders, reels, flanges, stub ends,
pressure tanks, vacuum tanks, pumps etc.

More Less

Product category: Semi finished products of polypropylene (PP)

PP Hollow bars and Solid rods

More Less

Product category: Plastics products and parts for plant building

For decades well-tried: Inspection glasses from Reinert-Ritz

More Less

Product category: Plastics products and parts for plant building

Reduce costs with customized constructions - Examples of projects

Construction of individual fittings
Less is more: We combine different fittings to save space and costs.
Our decades of experience with high pressure are incorporated into the
implementation. Let us advise you already in the planning of your individual
solution.

100% non-corrosive flanges
In its latest generation, our flanges are designed without any metal.
Made entirely of plastic, they are easy to install and provide the
expected load because of proven technology. Benefit from cost
savings with extraordinary secure flange transitions and loose flange
connections.

Versatile dirt traps
Our strainers made from PE or PP ensure clean piping systems.
The strainer can be removed and cleaned in no time.
According to our customer´s requirements, we manufacture
the strainers in different designs and with different filter units.

Flow-optimal pump transitions
Stable and individually at the same time: Our pump transition connects to
the pump with a VP-flange without offset. The higher wall thickness absorbs
stresses from the pipeline. An expansion in the pump transition ensures that
the medium flows optimally into the system. The transition can be designed
and manufactured with various measurement connections in any position. It
is provided with a VP or HP-Flange at the top.

Floor duct
Wall, floor or ceiling penetration simple, stable and fast:
Our floor duct is welded to the pipeline and bolted to the wall, floor or ceiling.
An O-ring is sealing the core hole additionally.

Movable joining socket
A simple solution to a big problem: At the construction site, the pipe is laid
long before the building is built. To compensate resulting inaccuracies, we
have designed a joining socket, which can be tilted, moved vertically and
rotated 360°. The built-in O-ring keeps the connection tight.

Service line contributor
Expand the opportunities in your system: Our flexible service line
contributor is compact and easy to assemble. We produce the right
component for your needs.

More Less

Product category: Plastics products and parts for plant building

Compensators and Flex elbows

More Less

About us

Company details

Founded in 1970 as an engineer’s office for the plastics technology, the main objective of the company’s activities was to study and resolve problems associated with the practical application of such materials.
These technical objectives were supported by a production plant laying the foundations of the manufacturing possibilities of today.

Over 200 dimensions of PE and PP in hollow bar (up to 1850 mm outside diameter) and solid rod (up to 1120 mm outside diameter) allow the certified fabrication of fittings new up to 2000 mm for fully pressure rated systems (gas and water supply applications, sewage pressure pipeline/ sewer systems/landfill sites and industry).

More Less