Rolf Schlicht GmbH

Postfach 730166 , 22121 Hamburg
Bei der Neuen Münze 25 , 22145 Hamburg
Germany

Telephone +49 40 679942-0
Fax +49 40 679942-11
info@schlicht-gmbh.de

This company is main exhibitor of

Trade fair hall

  • Hall 3 / A35
 Interactive Plan

Hall map

K 2016 hall map (Hall 3): stand A35

Fairground map

K 2016 fairground map: Hall 3

Our range of products

Product categories

  • 01  Raw materials, auxiliaries
  • 01.14  Others
  • 01.14.018  Purging compound
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.001  Mixers
  • 03.01.001.01  Mixers, continuous type, for solids

Mixers, continuous type, for solids

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.001  Mixers
  • 03.01.001.03  Mixers, batch type, for solids

Mixers, batch type, for solids

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.006  Pelletizers
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.01  Extruders
  • 03.02.001.01.01  Single screw extruders
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.01  Extruders
  • 03.02.001.01.02  Twin screw extruders
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.02  Extrusion lines
  • 03.02.001.02.05  Extrusion lines for pipes and profiles

Extrusion lines for pipes and profiles

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.02  Extrusion lines
  • 03.02.001.02.09  Extrusion lines for rubber

Extrusion lines for rubber

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.006  Calenders

Calenders

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.03  Post processing machines and downstream equipment
  • 03.03.004  Cutting machines
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.03  Post processing machines and downstream equipment
  • 03.03.007  Splitting machines, peeling machines

Splitting machines, peeling machines

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.03  Post processing machines and downstream equipment
  • 03.03.010  Deflashing equipment

Deflashing equipment

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.03  Post processing machines and downstream equipment
  • 03.03.012  Powder and talc application equipment

Powder and talc application equipment

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.03  Post processing machines and downstream equipment
  • 03.03.015  Vulcanizers
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.04  Machinery and plant for finishing, decorating, printing and marking
  • 03.04.005  Coating plant

Coating plant

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.05  Welding machines
  • 03.05.001  Hot-plate welding machines
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Integrated automation
  • 03.07.002  Material handling
  • 03.07.002.05  Dosing and metering equipment
  • 03.07.002.05.01  Volumetric dosing and metering equipment

Volumetric dosing and metering equipment

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Integrated automation
  • 03.07.002  Material handling
  • 03.07.002.05  Dosing and metering equipment
  • 03.07.002.05.02  Gravimetric dosing and metering equipment

Gravimetric dosing and metering equipment

Our products

Product category: Cutting machines

SAGITTA Cutting and lancing machines

TEM: Automatic Machines to cut extruded Rubber or Elastomer Profiles and Hoses

TEM Machine models can cut extruded rubber or elastomer profiles and hoses. The cutting system is made by motorised revolving circular knives with speed controlled by inverter.

The feed belts and the tool holding vertical slides are operated by Brushless motors. The thickness and the diameter of the gaskets to be cut can be set through the operator's control panel. Possibility to cut in continuous at a prefixed length with synchronised Brushless motors. Close circuit forced lubrication system allows an easier cutting. The unloading of the cut product is carried out by motorised belts. The machine is able to cut at the same time more extruded hoses (according to their diameter) directly from roll thanks to a dedicated feeding system. All the adjustments, data setting, diagnosis etc. are operated through the control panel and run by PLC.
TEM machine models are according to CE and EMC standards.

TGM: Automatic Lancing Machine to cut Rubber or Elastomer Slices and Seals

The machine model TGM cuts elastomer or rubber revolving sleeves into rings by means of lance-shaped knives or circular knives.
The sleeves are fixed on rotating mandrils. The machine model TGM allowa extreme precise lancing of rings. The horizontal slide and the vertical cutting slide run on recirculating roller guides and are operated by Brushless motors and recirculating ball precision screws. The sleeves holding mandrils are at variable speed by inverter. Close circuit forced lubrication system allows an easier cutting. All the adjustments, data setting, diagnosis etc. are operated through the control panel and run by PLC. Machine models TGM can be equipped from 1 up to 8 mandrils and can be customized according to the different needs. The sleeves loading and the rings unloading operations are very simple and quick. The operator can carry out the loading and unloading easily and in safety conditions. The machines are equipped with a vertical safety door pneumatically driven and synchronized with the machine's cycle. TGM plants are being built according to CE and EMC standard. They are used for pieces up to 150 mm length, if required even up to 500 mm length. Tolerance accuracy ± 0.01 mm. Capacity up to 140 cuts/min.

TGT: Automatic Cutting and Trimming Machine for Gaskets, Rotary Shaft Seals etc.

The rings are placed on the mandril by means of vacuum and are precisely cut by lance-shaped knives. So, edges and unwanted burr are removed quickly and precisely. After completion the parts will be removed from the mandril by means of air jets.
Execution of the plant with 2 independent cuttings units.
Capacity with 2 cuts up to 800 parts per hour, with one cut up to 1200 parts per hour.
Ring diameter max. 35 mm at max. wall thickness of 15 mm.
Fine adjustment of cut ± 30°.

More Less

Product category: Powder and talc application equipment

HUESTIS Air misers

HUESTIS air misers are used since many years in the cable, wire and profile industry with best success. The air wipes are of low noise, dry highly efficiently and are paid within short since the compressed air consumption is very low because of a special construction. We supply the HUESTIS air wipes with sizes from 3 mm up to 178 mm diameter. Special sizes also in rectangular shape are available upon request. They open automatically to allow knots, splices and other oversizes to pass without stopping production or creation of damages. Due to their small size they can be mounted in any cooling line without problems.

More Less

Product category: Gravimetric dosing and metering equipment

MOVACOLOR – The Art of Dosing

Movacolor supplies gravimetric and volumetric dosing devices for dry and free-flowing raw materials. Due to a specially designed dosing cylinder you can save 10-35 % of your additive agent. The output capacity is 5 gr – 25 kg/h. By means of a serial interface the systems can be centrally controlled. Also automatical refilling devices will be supplied. Regarding dosing time the Movacolor type „Balance“ automatically matches the speed of the injection moulding machine or extruder. NEW NEW NEW Movecolor offers now also liquid dosing. The MC Liquid will be supplied as volumetric and also gravimetric unit.

More Less

Product category: Vulcanizers, Hot-plate welding machines

NORMEC New PVC-TPE Press Type 101-00

In addition to the worldwide used film vulcanisizing splicing and half automatical PE-TPE splicing presses NorMec has constructed a further development of the film splicing press type 101-00 : On the special DUO-press you can join your profiles on one hand as before with EPDM-, NBR- or silicone films, but on the other hand you can join on this press also PVC and TPE profiles push type without film. The heating time is 10 seconds. Cooling down is as fast as this. The capacity of the machine is 2 kW, electrical connection 230 V. The press will be presented on the K 2010 on our stand in hall 3, stand A 35.

NorMec will furthermore present a brand new machine on the K-fair in October.
The new machine has 150mm mould holders and is operated by a PLC.
Normec will run demo of vulcanisation of EPDM automobile profiles during the K-fair.

More Less

Product category: Vulcanizers, Hot-plate welding machines

NORMEC Splicing machines

Machines and systems for joining rubber and silicone profiles, as well as moulds. Delivery of rubber film 0,2 - 0,6 mm

More Less

Product category: Powder and talc application equipment

Powder Coating Machine Model RSC

RSC Powder Coating Machine Model RSC
The machine model RSC was designed to powder a. o. hoses and profiles, strips and cables evenly, finely dosed and absolutely dust free with powders like talc, stearate, lac powder, swellable powder, graphite etc. We deliver machines for the smallest product diameters up to 200 mm. By the electrostatic charging of the powder a strong adhesive power on the product and a very even layer on the surface are reached. The electrostatic also makes sure that no powder falls from the product outside of the dusting chamber. We deliver machines with electrostatic, but also with just 2 or 4 powder nozzles depending on the application.

In the machine there is a fluidised powder hopper out of which the powder is sucked by pneumatic venturi pumps and blown through the guns onto the product. For an optimal adjustment of the powder quantity you can adjust the power of the electrostatic charging from
0-100 kV, the powder quantity and the speed of the dust cloud. Depending on the product the powder gun can be equipped with different powder nozzles.

In the machine there is a fully automatic and maintenance free filter system which is cleaned off by a special process. Thanks to this filter system a strong and constant vacuum is generated in the machine, so that no powder escapes into the ambient - guaranteed.

If there is not enough space in the line to place the machine we deliver a free standing dusting chamber which is connected to the machine by hoses. For an extremely fine powdering of slowly running products we offer as an option a fine dosing device to make sure that only a breath of powder is adhering on the strand.

As accessories you can get an automatic 90 l powder refilling hopper, a powder flow indicator giving an alarm in case no powder flows through the guns, an automatic adjustment of the electrostatic and the pneumatic in compliance with the extrusion speed, and an interface to connect the machine to the line.

The machine can be demonstrated in function.

More Less

Product category: Deflashing equipment

Shotblasting Machine PumaJet

Shot-blasting machine particulary suitable to deflash little parts in rubber, silicone or other similar material.
The machine is supplied with a turning drum (made in pierced stainless steel) mounted on linear slide with variable speed, a variable speed turbine that "shot" the media directly inside the drum, a variable speed spring for the media reclimbing.
The cooling of parts and flash is by means of the injection of liquid nitrogen inside an insulated cooling room, using a cryogenic valve.
At the end of cycle the deflashed parts are discharged on a little vibrating screen to separate the clean parts from the flash.

Technical characteristics:
- Loading capacity: from 6 to 8 Lt;
- Speed of drum: from 6 to 30 rpm adjustable by motor-variator;
- Speed of screw: from 900 to 1400 rpm adjustable by inverter OMRON; 
- Speed of turbine: from 3000 to 7000 rpm adjustable by inverter OMRON;
- Input tension: ~400V/50Hz 3 phases.

All the machine operations are managed by PLC and inverter.

More Less

Product category: Cutting machines

RS MULTICUT - Transport, cutting and commissioning plants

Messrs. ROLF SCHLICHT GmbH exhibit at the K 2016 machines for transport and cutting of extruded products. With our extensive experience and the cooperation of our customers our machines have been developed easy and robust in use at high standard in accuracy and precision.

Our caterpillars are impressive due to:

·         latest drive technology by means of direct servo drives,
·         conveyor speed up to 250 m/min.
·         quick and easy change of transport belts without any tools,
·         many different materials of transport belts, perfectly adapted to the customer’s product.

Depending on the cutting requirement we can offer rotation and orbital cutting technologies.

Both cutting technologies convince because of following advantages:

·         easy operation
·         quick blade change by quick clamp device
·         absolutely span-free, rectangular cut without any rework
·         lowest cutting length tolerance (no latency period during cutting)
·         max. cutting frequency about 3.200 cuts/min.
·         orbital cut executed on-fly
·         orbital cut without product deformation (even tough and brittle plastic materials can be cut without micro cracks)

Messrs. ROLF SCHLICHT GmbH offer the possibility to develop a system solution adapted to your requirements due to our extensive experience and your product knowledge. Planning, production, service and delivery of spare parts – you get the complete package from a single source.

At the K 2016 we will present the latest control of our rotation cutter. Furthermore we will show our caterpillar in working operation in connection with the orbital cutter.

The specialists of Messrs. ROLF SCHLICHT GmbH are looking forward to your visit with interesting discussions on our stand A35 in hall 3.

Of course you can inform yourself in advance about our manifold product range on our homepage www.schlicht-gmbh.de or by e-mail to info@schlicht-gmbh.de .

More Less

Product category: Extrusion lines for pipes and profiles, Single screw extruders, Twin screw extruders

Extrusion Lines for Pipes and Profiles

The FRIUL FILIERE group was founded in 1978 and manufactures machines and tools especially for the production of thermoplastic materials on an international level. FRIUL FILIERE is presently the only Italian company which manufactures complete extrusion lines and tools in its own works.

The wide delivery programme contains a. o.:
Complete extrusion lines and tools for: UPVC window profiles, Turn key projects for UPVC window and foam PVC doors, Foam PS picture frame & skirting profiles, PVC- ABS and PP edge band profiles, PVC-PE-PP pipes, Indirect rotogravure system printing machine.
Furthermore single screw extruders, twin screw extruders (conical and parallel), co-extruders and complete down stream equipment. FRIUL FILIERE supplies complete plants including know-how.

Due to its nearly 30 years' experience FRIUL FILIERE is in a position to offer competitive standard solutions as well as on-demand solutions in the area of profile and pipe extrusion.

More Less

Product category: Pelletizers

SAGITTA band granulator / Cutting Machines

The SAGITTA band granulator is a machine for granulating unvulcanised rubber compounds of all kinds on basis of natural and synthetic caoutchouc as well as for granulating thermoplastic plastics like hard or soft PVC, HDPE, LDPE, polyamide, ABS, PE etc.
These machines are also used for moulding compounds like linoleum for marbling, cellulose and sponge rubber, silicone and pure natural caoutchouc.
The feeding of extruders and transfer moulding presses with granules instead of stripes offers several advantages like blending of different compounds and thus better quality, less pulsation in the screw, less current consumption of the motor, automatic feeding of extruders and transfer moulding presses.
Many manufacturers of solvents take advantage of SAGITTA band granulators because by means of granules of e. g. 5x5x5 mm the dissolving times can be reduced considerably.
Machines with or without automatic powdering equipment are available. The granulating capacity ranges from 150 to 12.000 kg/h.
We deliver machines with a working width from 130 - 800 mm for granules with dimensions of 3x3 mm, 5x5 mm, 8x8 mm, 10x10 mm and 15x15 mm. For very hard and plain bands we deliver toothed in-feeding disc-cylinders in order to avoid slippage of the material. For granulating of very abrasive compounds knives of hart metal are available.
Furthermore the delivery programme offers pneumatical transport and de-powdering plants for rubber granules as well as powder feeding equipment for the granulators.

More Less

Product category: Purging compound

RAPID PURGE Cleaning compound

You know what your machine does for you - but do you do enough for the maintenance of your machine, too? If you want to clean your extrusion, injection-moulding or blow-moulding plant quickly and completely you should choose a technology which can be applied without any problems and which works perfectly: RAPIPD PURGE. The ready-for-use cleaning compound RAPID PURGE simply and absolutely reliably removes all thermoplastic resin and remarkably shortens the cleaning time necessary at colour or material changes. Moreover, it is a cleaning compound which is able to remove burned material also. RAPID PURGE works purely chemical, without admixture of abrasive components. It breaks down the residual plastic polymers into lower-viscous molecules which easily can be flushed out of the machine. This method, which is as soft as it is effective, is easy on the sensitive machine parts. At the same time, RAPID PURGE is ecologically beneficial and physically harmless, that is why it is favoured before all others especially in the area of medical goods and food production, as well as in the toys industry. RAPID PURGE is the original cleaning compound for all thermoplastics and it is used since many years by many plastic processing companies all around the world.

Rapid Purge Advantages:

 simple and reliable application

 Ready-for-use compound, no pre-mixing necessary

 remarkable reduction of downtime at colour and material changes

 economical performance, only one filling of the machine per purge

 easy on the machine parts

 environmentally friendly and physically harmless

More Less

Product category: Gravimetric dosing and metering equipment

Movacolor dosing systems

MOVACOLOR volumetric and gravimetric dosing systems
for additives in plastic extrusion, injection moulding and blow moulding

More Less

About us

Company details

Messrs. Rolf Schlicht GmbH in Hamburg, founded 1959, sells machines and plants to the world wide cable, rubber and plastics industry.

A well organized sales network in more than 30 countries guarantees a smooth co-operation between customer and manufacturer. Our well organized service department ensures a quick delivery of machines or spare parts as well as the action of our technical personnel. We supply in compliance to ISO 9001. We have test machines at our disposal and our construction department is equipped for the development of special machines.

Our subsidiary USD Gebrauchtmaschinen für Gummi und Kunststoff GmbH is your partner for used machines for the rubber and plastics industry, as well as for new presses at good prices or for overhauling of machines.

The company Schlicht Handelsgesellschaft oHG sells RAPID PURGE, the most effective cleaning compound presently available on the market. RAPID PURGE is used for changing of colour and material. It is fast and effective and removes also burnings from tools, dies, hot runner channels, screws etc.

Schlicht Handelsgesellschaft oHG  furthermore sells DUROPLAST shotblasting material to be used in a blasting cabin as dry or humid blasting agent for removal of surface layers, cleaning or removal of paint. DUROPLAST is available in different qualities. Depending on the field of utilization different granule sizes can be supplied.

SCHLICHT DELIVERY PROGRAM:

RS POWDERTECH: Electrostatic powder coating machines for cables, hoses, profiles and bands, model RSC.

RS MULTICUT: Cutting systems, caterpillars, extrusion downstream equipment. Cutting machine model MC-50, and orbital cutter OC-15 up to OC-65 for pipes.

RS MASCHINENBAU: Special machines for the rubber, cable and plastics industry.

HUESTIS: Air wipes for blowing and drying, cable strippers with infeeding and cutting systems.

NORMEC: Joining and splicing systems for profiles, rings etc. Vulcanizing materials, moulds, handling systems.

PRODICON: Batch-off equipment, cutting and winding systems, as well as downstream equipment in the mixing room.

COMERIO ERCOLE: Mixing mills, internal mixers, calenders, laboratory equipment for rubber and PVC processing.

PUMATECH: Rubber-bale cutters, strip cutters, cryogenic deflashing systems.

SAGITTA: Band granulators, transport and depowdering systems. Rubber and plastic slitting machine.

BATTAGGION: Sigma and Z-kneaders, granulating systems, turbomixers, high speed mixers, vacuum dryers, planet mixers as well as double screw extruders, mixing mills, extruders for silicone processing.

ENRICO MOLTENI: Mixing technology for the chemical industry, food, pharma industry, cosmetics, rubber and plastics. A subsidiary of the Battaggion group.

FRIUL FILIERE: Extruders and extrusion plans for plastic profiles, sheets, bands and pipes.

USD: Used machinery for the rubber and plastics industry. New presses at good prices. Overhauling of machines.

SCHLICHT HANDEL: DUROPLAST shotblasting material for cleaning of machine components and other metal parts.

MOVACOLOR: Volumetric and gravimetric dosing systems, from 5 g/h up to 500 kg/h.

RAPID PURGE: Cleaning compound for plastic processing extruders, injection moulding and blow moulding machines.

Rolf Schlicht GmbH
Bei der Neuen Münze 25 - 22145 Hamburg
Phone: +49 40 67 99 42-0 - Fax: +49 40 67 99 42-11
E-Mail: info@schlicht-gmbh.de
www.schlicht-gmbh.de

Subsidiary:
USD Gebrauchtmaschinen für Gummi- und Kunststoff GmbH
Bei der Neuen Münze 25 - 22145 Hamburg
Phone: +49 40 67 92 93 02 - Fax: +49 40 67 99 42-11
E-Mail: info@schlicht-gmbh.de      
www.usdmachinery.de

Schlicht Handelsgesellschaft oHG
Bei der Neuen Münze 25 - 22145 Hamburg
Phone: +49 40 67 92 93 01 - Fax: +49 40 67 99 42-11
E-Mail: info@schlicht-gmbh.de
www.schlicht-handel.de

Visit us at the K 2016 in hall 3 stand A35

 

More Less