VEGA S.r.l.

Via De Gaspari, 16 , 21053 Castellanza (VA)
Italy

Telephone +39 0331 481077
Fax +39 0331 481149
sales@vegacyl.com

This company is main exhibitor of

Trade fair hall

  • Hall 2 / B15
 Interactive Plan

Hall map

K 2016 hall map (Hall 2): stand B15

Fairground map

K 2016 fairground map: Hall 2

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.06  Moulds and dies
  • 03.06.004  Standard parts for moulds

Standard parts for moulds

Our products

Product category: Barrels

V215CR Tie Rod Hydraulic Cylinder

The cylinders of V215CR range are built according to ISO 6020/2 Compact Norms and they are changeable with other similar cylinders (with reserve; personally verify all dimensions) This model permits a wide range of applications with the best compromise between quality and price where not particular requirements about pressure, temperature, dimensions are requested. Till bore 160 magnetic switches can be applied (with a proper version).

More Less

Product category: Barrels

V220CC long stroke blockcylinder

The V220CC cylinders have been specially designed for being extremely compact and for applying the integrated end stroke MAGNETIC SWITCHES. They are the complement to the V250CE for strokes higher than 50 mm. and represent the model which permits the highest customization following customers exigencies for special options as: clamping style, rod end, oil delivery, etc. Available bores: from 32 to 100 mm. Strokes 50 to 500 mm. These cylinders are ideal for displacing ejector plates on any plastic injection molds or for any long stroke slides which are inside or partially inside the mold.

More Less

Product category: Barrels

V250CE Compact Block Cylinder

The V250CE cylinders have been specially designed for being extremely compact and for applying the integrated end stroke MAGNETIC SWITCHES. Furthermore their construction permits a high standardization with consequent lower price and immediate delivery time. Available bores: from 25 to 100 mm. Strokes 20, 50 and 80 mm. Depending on the bore. These cylinders are ideal for short stroke slides and cores on plastic injection moulds. The use for heavy duties is not recommended.

More Less

Product category: Barrels

V450CM Compact Block Cylinder

The V450CM cylinders have been specially designed for being extremely compact and for applying the integrated end stroke MECHANICAL SWITCHES. Furthermore their construction permits a high standardization with consequent lower price and immediate delivery time. Available bores: from 16 mm. to 100 mm. and strokes from 10 to 120 depending on the bore (look at page M4). These cylinders are ideal any use where compact dimensions are required and recommended in case of heavy duties applications as die casting moulds.

More Less

Product category: Barrels

V260CF Self-Locking Hydraulic Cylinder

The V260CF are double-acting hydraulic cylinders with a mechanical locking system of the rod in the end stroke position (extended rod), which permits to contrast very high opposite thrusts. Such a solution is widely applicable in the field of plastic injection and die-casting molds, in order to stand the injection pressure on large molding surfaces. The rod is hydraulically unlocked automatically when the piston comes back. WARNING: - For a correct functioning the cylinder it’s necessary to complete all the times the total available cylinder stroke, both forward and backward, in order to assuring the locking on one side and to avoid hammer-effects on piston-rod screw on the other side. For a firm locking it is necessary to keep the oil in pressure, when pushing, at a minimum of 120 bar-1740 PSI.- Pay great attention to the traction force, which is considerably lower than the thrust.

More Less

Product category: Barrels

V210CS Hydraulic Unscrewing Device

The V210CS cylinders have been designed for actuating threaded cores on plastic injection moulds by integrated racks – one or two – fully guided, besides the cylinder body. The advantage of this solution is the compactness in overall dimensions, the standardization of all components with consequent price advantage. The hydraulic unscrewing device can be provided of one or two racks with customized length, a wide range of modules for actuating one or more cores in one time. Cylinder available bores 32, 40 and 50 mm. with strokes 300, 400 and 500 mm.

More Less

Product category: Barrels

V400CL Integrated Hydraulic Cylinder

The V400CL cylinders are the extreme solution of compactness: we provide rod, piston, cartridge and seals; you get the “chamber” in the mold. The components are those used for the V450CM, which prove extremely sturdy and always available. Available bores: from 16 mm. to 100 mm. Strokes from 10 to 120 depending on the bore. These cylinders are ideal for any use where compact dimensions are required and recommended in case of heavy duties applications as die casting moulds.

More Less

Product category: Standard parts for moulds

SIM08 Switch Connection Box

The SIM08 connection box provides an optimal solution for connecting all type of cylinder end-stroke switches.

More Less

About us

Company details

VEGA is a Global Company with locations in Italy and China for the manufacturing, distribution and assistance of hydraulic cylinders for all types of mould applications.

VEGA’s formula for success is based on 4 key points:
1. Providing Specialist Hydraulic Solutions for Mould applications
2. Innovation in Planning and Technology
3. Excellent Quality Assurance
4. Committed to first-rate Customer Service

Our philosophy is to provide a global service for hydraulic cylinders to all international companies who have a world wide network and need a single professional solution for this application field. Vega will work from the basic conception of the project and will remain committed providing maintenance and trouble shooting during the moulding.
VEGA is also a good supplier of cylinders for local mould makers who need a top quality and reliable product. VEGA is certified according to the ISO 9001/2000 standards, from designing and the testing to stock management, manufacturing and quality control. The automated on-line quotation and ordering process allows Vega to combine a fast and flexible service with an excellent high quality endproduct.

Being international starts from the mind. VEGA staff is a mixture of people from the world: Africa, Asia, Europe and South America which have an open mind and are highly-qualificated.
On www.vegacylinder.com you can define the right cylinder model. Using the configuration wizard you can build your cylinder - standard or customized - and download 2D and 3D files for your project. Catalogues, spare parts details, distribution network, e-commerce and news can also be provided by the interactive web site, in 9 languages.

VEGA has local partners in over 46 countries all over the world. All distributors are specialists in mould components and work exclusively in the world of mould and moulding – plastic injection and die casting.

More Less