Wolf Kunststoff-Gleitlager GmbH

Heisenbergstr. 63-65 , 50169 Kerpen
Germany

Telephone +49 2237 9749-0
Fax +49 2237 9749-20
info@zedex.de

Trade fair hall

  • Hall 8b / A33
 Interactive Plan

Hall map

K 2016 hall map (Hall 8b): stand A33

Fairground map

K 2016 fairground map: Hall 8b

Our range of products

Product categories

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.01  Processing technologies
  • 02.01.002  Products made by extrusion
  • 02  Semi-finished products,parts and reinforced plastics
  • 02.04  Product groups
  • 02.04.001  Semi finished products
  • 02.04.001.15  other and machined semi finished products / Pre-cut parts

other and machined semi finished products / Pre-cut parts

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.04  Product groups
  • 02.04.003  Technical parts
  • 02.04.003.03  Parts from high performance thermoplastics

Parts from high performance thermoplastics

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.04  Product groups
  • 02.04.004  Compounds/Recyclates

Compounds/Recyclates

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.05  Products
  • 02.05.007  Coatings

Coatings

  • 02  Semi-finished products,parts and reinforced plastics
  • 02.05  Products
  • 02.05.034  Bearing boxes, bushes and sections

Bearing boxes, bushes and sections

Our products

Product category: Products made by extrusion

"ZEDEX": Semi-finished products POM PET PPS PEEK PEI

We are developers and manufacturers of the high performance plastic materials ZEDEX. ZEDEX is available as plastic granules, semi-finished products (rods, tubes and sheet), machined and injection moulded end parts.

We also offer special compounds based on:

POM
PET
PPS
PEEK
PEI
PI

More Less

Product category: Products made by extrusion

"ZEDEX": Finish Parts

We are basically active in the following areas:

Energy supply, water supply, measuring instruments, laboratory equipment, conveyor belts, plant engineering, mechanical industry, transportation industry, automotive, truck, automobile , agricultural machinery , construction machinery, medical industry , food industry, offshore industry, solar industries.

For these areas we mainly manufacture the following components:

Gears, seals, bushings, plastic bearings, plastic wheels grip, nuts, scraper, guide rails, coating; but even many others.

More Less

Product category: Products made by extrusion

"ZEDEX": Compounds

Through intensive research and continuous development of materials, our high performance plastics ZEDEX have excep-tional properties. High performance plastics ZEDEX are used in fields, where previously the use of plastics was unimaginable.We are able to integrate the required properties in existing high performance plastics ZEDEX by polymers modification. The lead times of these special pieces are often not too long and frequently big quantities are not required.

Thanks to our extensive testing facilities, we can determine specific values, through specific tests: density, moisture, residual moisture content, melt viscosity (MVR, MFRB), ultrasound test, traction, pressure, three-point bending, creep curves, heat resistance, heat capacity, impact-strength test notched, ball indentation hardness and Shore hardness, fatigue strength, microscope´s enlargement 220-times, surface roughness, surface profiling, surface tension, wear value (all contact conditions, motion curves, lubricate), friction value (stat./dyn., dry/ lubricate), PV-value (movement nuts,bushings, gears), dielectric strength, surface resistivity, volume resistivity, colour measurement(CIE Lab), FTIR spectroscopy, melting temperature, glass transition temperature, crystallinity degree, flexural E-modulus, thermal expansion coefficient

More Less

Product category: Products made by extrusion

"ZEDEX": Precison Plastic bearings

We manufacture high precision plastic bearings according to the customer's requirements. Depending on the material and the dimension we can reach a precision of IT6.

Have a look on our website.

More Less

About us

Company details

We are developer and manufacturers of the high performance plastic materials ZEDEX. ZEDEX is available as plastic granules, semi-finished products (rods, tubes and sheet), machined and injection moulded end parts.

We also offer special compounds based on:

POM
PET
PPS
PEEK
PEI
PI

We are basically active in the following areas:

Energy supply, water supply, measuring instruments, laboratory equipment, conveyor belts, plant engineering, mechanical industry, transportation industry, automotive, truck, automobile , agricultural machinery , construction machinery, medical industry, food industry, offshore industry, solar industries.

For these areas we mainly manufacture the following components:

Gears, seals, bushings, plastic wheels grip, nuts, scraper, guide rails, coating but even many others.

To increase the efficiency of a product and maximize its performance, all phases of the process and their consequent effects on the properties of products, need to be considered at the beginning of the product development.

A tight integration of the individual process steps results by saving time and costs and therefore reducing the possibility of error.

Through our expertise and our machinery we cover the entire process chain from the product requirement to its production (plastic granules, rods, tubes and sheet, machined and injected moulded end parts).

We will advise you with pleasure, perform the necessary calculations, choose the best plastic-based design for the selected material, choose the most process cost effective manufacturing process and manufacture your prototypes and successively the volume production.

If there are no materials with the properties required by your components , we can create the most suitable material through our Research & Development department.

Of course, we are at your complete disposal also for the individual process steps , for example, making your products cheaper to produce, to resolve technical problems or to transform your idea into a series-production component.

More Less

Company data

Sales volume

5 - 20 Mill. US $

Export content

max. 25%

Number of employees

31 - 100

Foundation

1968

Target groups
  • Plastic product manufacturing
  • Machinery construction