iNOEX GmbH

Maschweg 70 , 49324 Melle
Germany

Telephone +49 5422 60507-0
Fax +49 5422 60507-101
info@inoex.de

Trade fair hall

  • Hall 10 / E79
 Interactive Plan

Hall map

K 2016 hall map (Hall 10): stand E79

Fairground map

K 2016 fairground map: Hall 10

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.02  Extrusion lines
  • 03.02.001.02.05  Extrusion lines for pipes and profiles

Extrusion lines for pipes and profiles

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.06  Moulds and dies
  • 03.06.003  Extrusion dies
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Integrated automation
  • 03.07.001  Process control technique
  • 03.07.001.02  Machine vision systems

Machine vision systems

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Integrated automation
  • 03.07.001  Process control technique
  • 03.07.001.03  Software

Software

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Integrated automation
  • 03.07.002  Material handling
  • 03.07.002.05  Dosing and metering equipment
  • 03.07.002.05.01  Volumetric dosing and metering equipment

Volumetric dosing and metering equipment

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Integrated automation
  • 03.07.002  Material handling
  • 03.07.002.05  Dosing and metering equipment
  • 03.07.002.05.02  Gravimetric dosing and metering equipment
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.08  Ancillary equipment
  • 03.08.002  Heating and cooling technology
  • 03.08.002.03  Internal cooling equipment

Internal cooling equipment

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.09  Measuring and test equipment
  • 03.09.002  Measuring and test equipment for mechanical or dynamic properties
  • 03.09.002.01  Thickness gauges
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.09  Measuring and test equipment
  • 03.09.007  Measuring and test equipment for optical properties

Measuring and test equipment for optical properties

Our products

Product category: Thickness gauges

WARP 4/8/100/XXL

WARP a terahertz based wall thickness measuring system for quality control of plastic material pipes in the extrusion process. The system measures & controls the conformity of product parameters to given standards:

Wall thickness: individual layers and total layer thickness
Wall thickness distribution
Interior diameter
Exterior diameter
Ovalness
Eccentricity
WARP documents all relevant quality data and can therefore provide evidence on quality in compliance with global standards. AUREX systems are suitable for the integration into new extrusion machinery or for retrofitting into existing extrusion lines.

WARP 100 - designed for a 100 % measurement, especially of gas pipes and pressure pipes. The system impresses with its easy operation thanks
to the automated centering process. Direct measurement of diameters in 19 axes.

100 % wall thickness measurement for gas pipes and pressure pipes!

More Less

Product category: Thickness gauges

WARP Portable

WARP PORTABLE was developed for a fast and easy wall thickness point measurement. It is independent of pipe temperatures which makes WARP
PORTABLE a perfect device for wall thickness measurement on large-sized pipes carried out in front of the calibration
sleeve. 

Point measurement of wall thicknesses, independent of temperatures!

More Less

Product category: Thickness gauges

QUAMTUM 360

QUANTUM a terahertz based wall thickness measuring system for quality control of plastic material pipes and tubes in the extrusion process. The system measures & controls the conformity of product parameters to given standards:

Wall thickness: individual layers and total layer thickness
Wall thickness distribution
Interior diameter
Exterior diameter
Ovalness
Eccentricity

QUANTUM documents all relevant quality data and can therefore provide evidence on quality in compliance with global standards. AUREX systems are suitable for the integration into new extrusion machinery or for retrofitting into existing extrusion lines.

More Less

Product category: Thickness gauges

QUANTUM CP

QUANTUM CP is the first wall thickness measuring system for corrugated pipes. Wall thickness sizes and diameters of crown, valley, spigot and bell
are measured around 360°.

360° measurement of corrugated pipes!

More Less

Product category: Thickness gauges

QUANTUM BM

QUANTUM BM - the first wall thickness and diameter measuring system for blow moulding. Inline measurement of wall thickness sizes and
diameters of the melt flow. Offline measurement of the wallthickness on the ready product.

Inline and offline wall thickness measurement for blow moulding!

More Less

Product category: Thickness gauges

QUANTUM Film

IDEAL FOR CAST FILM.

QUANTUM Film features the proven QUANTUM Terahertz electronics, the Terahertz sensor with cable lengths of 10 m or 15 m and a traversing frame to measure the sheets. Frequently it is possible to measure not only the overall wall thickness size but to carry out a multiple layer measurement. Measuring accuracy is below ±10 μm1.

Due to the non-ionising Terahertz radiation, QUANTUM Film is a perfect replacement for radioactive systems. Usually existing traversing units can remain in place for further use. Beside standard film types, QUANTUM Film can be used to measure also the wall thickness of paper, coatings, foam materials, fibreglass and insulations, all of them inline during the ongoing production process.

More Less

Product category: Thickness gauges

AUREX

AUREX , the ultrasonic system for quality control of plastic material pipes and tubes in the extrusion process. The system measures & controls the conformity of product parameters to given standards:

Wall thickness: individual layers and total layer thickness
Wall thickness distribution
Interior diameter
Exterior diameter
Ovalness
Eccentricity
Surface flaws

AUREX documents all relevant quality data and can therefore provide evidence on quality in compliance with global standards. AUREX systems are suitable for the integration into new extrusion machinery or for retrofitting into existing extrusion lines.

More Less

Product category: Gravimetric dosing and metering equipment

Mono Weigher

SAVEOMAT mono weighers for granules and powder are mounted directly above the extruder inlet. A SAVEOMAT terminal controls the screw speed
and/or the haul-off speed, depending on the control loop. The production process is kept on a constant level, with exact mass throughput rates,
exact weight per length and a reduced consumption of raw material.

Reduced raw material consumption!

More Less

Product category: Extrusion lines for pipes and profiles

ADVANTAGE extrusion line

Automated change of dimensions

The automation of dimensional changes belongs to the challenges in pipe extrusion. If this goal is reached, it provides immense potential for savings, a maximum flexibility and the very highest cost-effectiveness.
Above all, ADVANTAGE shortens downtime of the extrusion lines to a minimum, which assures competitive advantages. In contrast, conventional pipe extrusion lines have to be stopped completely, then converted
and re-started.

More Less

Product category: Extrusion dies

ADVANTAGE Pipe Support

Developed according to the chain principle is the flexible pipe support, which ensures not only a reliable but also a centric guidance of the pipe inside the vacuum tank. Depending on the pipe dimension, the pipe support automatically adjusts to the correct height.
Secure guidance on a constant extrusion height!

More Less

Product category: Extrusion dies

ADVANTAGE Calibration Sleeve

The centerpiece of the proven and reliable ADVANTAGE technology is the
calibration sleeve. All dimensions and their pressure classes from 63 to 500 mm, in
the XXL version up to 1000 mm, can be quickly and steplessy adjusted.
Infinitely adjustable!

More Less

Product category: Measuring and test equipment for optical properties

AUREX OBF

AUREX OBF - Optical surface detection system for the plastic pipe production.

AUREX OBF represents a basic optical 100 % surface inspection system for the production of plastic pipes.

Very small surface flaws can be detected:

0,27 mm2 for pipes of 10 to 32 mm Ø
0,40 mm2 for pipes of 32 to 63 mm Ø

Flaws are automatically recognized by the iOS and a flaw picture is transmitted to the master terminal.

More Less

Product category: Gravimetric dosing and metering equipment

MONO WEIGHER US

SAVEOMAT US features a gravimetric system of different sizes with funnel weighers for the non-obstructed addition of powder into the extrusion
process. Raw materials including a max. weight ratio of 20 % of chalk can be dosed by this weigher.

Non-obstructed dosing of max. 20 % CaCO3!

More Less

Product category: Gravimetric dosing and metering equipment

MONO WEIGHER HF

SAVEOMAT HF is a series of gravimetric systems with funnel weighers for the addition of hardly flowing materials.
Max. weight proportion of chalk: 100 % chalk.

Dosing of up to 100 % chalk!

More Less

Product category: Gravimetric dosing and metering equipment

DOSING STATION I-LINE

SAVEOMAT i-line is a freely configurable flexible dosing station for the accurate mixing and dosing of max. 7 components. Suitable for granules or
powder.

Custom-made dosing stations for complex applications!

More Less

Product category: Gravimetric dosing and metering equipment

LIQUID DOSING

SAVEOMAT MD allows the continuous dosing and conveyance of granules, powder and liquid materials such as peroxide or silane. Strict adherence to recipes during the dosing and conveyance process. The accurate supply and control of the multi-component dosing station reduces consumed material quantities, particularly the consumption of peroxide or silane.

Multi-component dosing!

More Less

Company news

Date

Topic

Download

Oct 14, 2016

Rainer Kottmeier new Managing Director

Since the beginning of August 2016, Rainer Kottmeier (55) has been the new Managing Director for CiTEX Holding GmbH in Melle. He is responsible for the operational management of the extrusion division. In this position he has also been appointed to the management of iNOEX GmbH and iBA GmbH. Their worldwide leadership equally belongs to his responsibility. Together with the managing partner, Reinhard Klose, he will set the course for the realization of far-reaching ideas and visions.

„In Rainer Kottmeier we have been able to gain an excellent expert of the extrusion industry. With him at the helm we will continue to actively pursue our expansion course in automation and process technology in the extrusion market“, commented Reinhard Klose.

Rainer Kottmeier has extensive experience in the extrusion business and in mechanical engineering. He started his career with the sale of pipe and profile extrusion lines before in 1990 he started to work already for many years for iNOEX GmbH, among others in the position of Managing Director. In 2005, he changed to the Management and the executive management of Battenfeld Extrusionstechnik GmbH in Bad Oeynhausen and Kempen. With the strategic realignment of the BC-Group, he assumed various functions, among others first the global management of the corporate division „Construction“, then the management of the division „Infrastructure“.

Media contact:
Arno Neumeister
Phone: +49/5422/60507-62
arno.neumeister@inoex.de

More Less

About us

Company details

iNOEX is a pioneer in developing equipment for the plastic material industry. We are one of the leaders in this field. The development, production and sale of innovative measuring & control technology as well as process engineering is our business. Besides, we offer packages for the full automation of an extrusion process. Product manufacturers and OEMs all over the world benefit from iNOEX systems during their production of pipes, profiles, cables and film.

We have got our representatives all over the world besides our sales office in the United Kingdom plus our subsidiaries in the U.S. and China.
The company is certified in accordance with DIN EN ISO 9001:2008.

More Less

Company data

Number of employees

101 - 500

Foundation

1984

Area of business

Machinery and equipment for the plastics and rubber industries

Target groups
  • Rubber manufacturing / processing
  • Machinery construction
  • Packaging / distribution
  • Construction / building and living