01/10/2013

Roll-o-Matic A/S

Roll-o-Matic will exhibit Draw tape line and Produce bags line at K-2013

At K-2013, the Danish company Roll-o-Matic will be exhibiting 2 roll-bag production lines:


 


Draw tape line with the new High-Speed Winder


We look forward to show our Delta maxTM draw tape line with 3 major developments: the “fill-safe” sealing system for the draw string pocket, which reduces considerably the risk of tearing the top of the bag when lifting the filled bag; the Delta maxTM sealing/perforation system for the draw tape line, which can perform up to 500 cycles per minute; and the new developed High-speed winder HSW 550/30, which can make up to 30 roll changes per minute.


This is a flexible line, which also can produce bottom sealed bags. With additional modules it can also be adapted to produce other types of bags.


 


Produce bags line with High-speed Multilane Winder


The Omega S is a dedicated line for production of bottom sealed, lay-flat bags down to 5 μ with extraordinary sealing quality. The Omega can be equipped with our multilane winder HMW, which can run with up to 7 lanes, depending on the bag dimensions. With this set up the slit seal is done after the sealing and perforation, allowing to make the sealing and perforation single-lane, with very accurate tension control.


At the K exhibition the Omega will be running a 4-lane production of produce bags, with a line speed of 180 m/min and an output of 1600 bags per minute.


Roll-o-Matic will be at Hall 3, stand C54.


Visit us. We are ready to impress you!