[image_0]To demonstrate the capabilities of material and machinery the sister companies Rampf Dosiertechnik and Rampf Giessharze will show a live demonstration where a newly developed thixotropic soft integral foam "live" is applied with a DC-CNC low-pressure mixing and dispensing unit. Raku-PUR 32-3275 is a two-component system based on polyurethane that contains no solvents or plasticisers. Its water absorption is said to be less than 5 %. Further benefits include high mechanical strength, short tack-free time and therefore fast installation and high-quality seal. The compact DC-CNC dispensing cell is well-suited for the 2D or 3D application of casting, sealing and adhesive systems. The basic set-up of the fully enclosed DC-CNC is equipped with an integrated control cabinet and a 2-component material conditioning system. Further features include a Siemens Sinumerik modular control system and integrated process control for continuous monitoring of pressure, fill level and speed. The mixing and dispensing system can optionally be equipped with a high-pressure rinse agent recycling system, high-pressure water rinsing or various items of automation equipment depending on the application in question.