Guill Tool & Engineering Co., Inc.

Guill Series CV 500—New Continuous Vulcanization Extrusion Tooling

Adapts Latest Medical Advancements
Enhances Cable, Wire and Electronic Applications for Everyone
The new Series CV 500 tooling from Guill Tool & Engineering Inc. combines elements of its modular design from Guill’s 800 medical series as well as its highly successful polymer/rubber extrusion heads. This technology offers many key benefits to wire and cable and other industrial users, including a higher degree of accuracy to meet the latest stringent wire and cable technology demands.
Today’s demanding wire and cable manufacturers, as well as extrusion companies’ operators and technicians are benefiting from the CV 500 Series with its improved temperature control, decreased material volume for ultra-precision, plus easier and faster adjustment and cleaning processes of the crosshead and tooling. Maintaining peak performance tooling is now built into the Series 500 in order to assist with the operator’s work scheduling, and to provide better and more precise end products.
The Design
The CV 500 Series is a precision crosshead design, which is well suited to meet the greater strength and improved tolerances required for the manufacture of today’s newest wire and cable needs for a growing number of power utilities, plus other industrial high-voltage applications.
“We have been engineering for wire and cable and continuous vulcanization applications since the inception of Guill Tool & Engineering in 1962,” states Roger Guillemette, Chairman and CEO of Guill Tool & Engineering Inc. “Today, electric utility and industrial customers are asking for increasingly higher performance extrusion capabilities. This CV 500 Series tooling is our most advanced yet, designed to meet today’s tough industrial demands.”
- more -
1 of 4

Guill Series CV 500—New Continuous Vulcanization (cont’d)
Flow Analysis
The rigorous flow testing and analysis enables the production of more difficult polymer/rubber applications with a high level of product consistency throughout, resulting in adherence to the precise tolerances and thinner walls required in these applications. “This adds up to huge customer savings in material and labor for production over the course of a year,” stresses Guillemette.
With testing and analysis, parameters such as flow, pressure, heat and the wall thickness of the particular product to be extruded are critical to performance.
Even Heat Equals Better Flow
Balanced temperature control for better flow is made possible by an integrated water cooling system. With the cooling system, the appropriate processing temperature for the rubber in the crosshead is maintained. By having the water cooling capability, the potential for scorching of the rubber extrusion is eliminated. “The close-tolerance extrusion process made possible by our new crosshead results in reduced material waste while generating significant cost savings for customers,” emphasizes Guillemette.
Multilayer Extrusion Capability
“Unlike tandem extrusion, multilayer extrusion prevents contamination and ensures greater adhesion. We are receiving more and more requests for multilayer capability, especially for triple-layer cable,” summarizes Guillemette.
As part of the new CV design, Guill’s multiport feed system and the configuration of the flow splitter, determined through flow testing and analysis, enable customization for the precise multilayer requirements of each customer’s specific needs.
Other important Guill Technologies built into the CV 500 Series are:
• Quick tooling changes—as short as 15 minutes for less downtime.
• The SealRight™ System—for leak-free design.
• Fixed center or adjustable center capabilities. (Usually multilayer applications use an
adjustable center configuration.)
• Competitively priced for wire and cable and other industrial applications.
- more -
2 of 4

Guill Series CV 500—New Continuous Vulcanization (cont’d)
The CV 500 Series is available in custom dimensions plus a wide range of popular sizes. The popular sizes specifications include core diameter .437 inches (11.0 mm) to 5.500 inches (139.7 mm) and maximum die from .500 inches (12.70 mm) to 6.000 inches (152.4 mm). For complete data sheets and/or technical information go to our website www.Guill.com.

Guill Tool received ISO certification in 1995, the first major extrusion tooling company worldwide to meet these international quality standards. It has long been recognized as one of the leading established designers and manufacturers of custom extrusion tooling for a wide range of applications including wire, cable, fibre optics, medical tube, wood composites, automotive tube, plastics compounding, custom applications, rubber, profile, industrial pipe, hose and tube, blow moulding, plus food and packaging.
Guill Tool also encourages and provides education and training for the extrusion industry by supplying plastic and aluminum model heads, fully illustrated operating manuals for step-by-step assembly and disassembly, training videotapes, as well as classes on the care and cleaning of extrusion tooling.
Founded in Rhode Island in 1962 by A. Roger Guillemette, Guill Tool was established as a job shop supplying tips, dies, crossheads and replacement parts to the wire and cable, plastics and rubber industries in New England, across the U.S. and Canada, and today worldwide.
For more information about Guill Tool products or services, or for the name of the representative in your area, please contact: Guill Tool & Engineering Co. Inc., 10 Pike Street, West Warwick, RI 02893 (USA). Tel: 011.401.828.7600. Fax: 011.401.823.5310. Email: sales@guill.com. Visit our website at www.Guill.com. Or in Europe, please contact: Padraic Lunn Enterprises Ltd. Carrickoneilleen, Calry, Sligo Ireland, Tel: 353 (0) 86-8093406 Fax: 353 (0) 71-9147604, Email: plunn1@eircom.net.