The new version of the profiling machine is now able to cut sheets up to a thickness of 300 mm in one operation. Due to a softer entering of the material, there are hardly any differences in the profile height anymore in the first cut and at the end of the material. The flip-over function serves for de-stacking the upper profiled sheet half also with the profile on top. The utilisation of the sheet flip-over station can be preselected so that the finished sheet stack can be transferred manually or automatically on a pallet to a glue or cover line where the sheets already flipped over are laid on directly by manipulators for example. The profile rollers are manufactured according to the customers' requirements.Bäumer said it will also show at the fair the OFS-H Twincut contour cutting machine which can be operated with either a circulating or oscillating knife. Upholstery and mattresses are cut precisely with a maximum of 60 m/min. The oscillating knife is used for technical articles where extreme accuracy in the contour is demanded. The changeover time to the circulating knife only takes a few minutes. Furthermore Bäumer will inform about POS, the software which enables to link and control machines and cutting systems in an optimum way in order to process the foam in automated production lines after foaminyg up to the cut foam product.